The commit fixes the issue where duplicated code in
img_mgmt_impl_upload_inspect caused redirecting all image uploads,
in multi-image configuration, to the first image.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
IT8XXX2 uses shared ns16550.c driver which does not provide a power
management callback(pm_action_cb), so create driver to handle
IT8XXX2 specific UART features.
note: pm_action_cb(old name: pm_control_fn)
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
For port_set_bits_raw(), port_clear_bits_raw(), and port_toggle_bits(),
the second parameter sould be gpio_port_pins_t type. Currently, it
doesn't have other side effect, but it sould be fix. This commit fixes
it.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Removing maintainer and/or collaborator status on
- nRF platforms
- TF-M
- userspace
- cmsis-dsp
- MAINTAINERS file
for ioannisg. Replace with @anangl or others, where applicable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Prescaler was misplaced in pwm binding, instead of timers binding.
For example, TIM6/TIM7 doesn't have PWM capability,
but have a prescaler.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Prescaler was misplaced in pwm binding, instead of timers binding.
For example, TIM6/TIM7 doesn't have PWM capability,
but have a prescaler.
This change also prepares the introduction of timer based counter
(which requires prescaler at timer level)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Prescaler was misplaced in pwm binding, instead of timers binding.
For example, TIM6/TIM7 doesn't have PWM capability,
but have a prescaler.
This change also prepares the introduction of timer based counter
(which requires prescaler at timer level)
For compatibility reason temporarily use pwm prescaler if it exists,
otehrwise use timers prescaler.
And thus avoid to avoid breaking boards out of tree.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Prescaler was misplaced in pwm binding, instead of timers binding.
For example, TIM6/TIM7 doesn't have PWM capability,
but have a prescaler.
This change also prepares the introduction of timer based counter
(which requires prescaler at timer level)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Prescaler was misplaced in pwm binding, instead of timers binding.
For example, TIM6/TIM7 doesn't have PWM capability,
but have a prescaler.
Also prescaler is common to all PWM channels of the same timer.
This change also prepares the introduction of timer based counter
(which requires prescaler at timer level)
For compatibility reason temporarily keep pwm binding to avoid
breaking boards out of tree.
Block st,prescaler property in lptim binding
as lptim doesn't use this property for now.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Trivial fix of compilation error "invalid operands to binary "
when CONFIG_CAN_AUTO_BUS_OFF_RECOVERY = n
Fixes#40290
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
Applying similar changes to cavs_v20 as in commit
8bc4539cec:
Older binutils, like the (nine-year-old!) 2.23 version that powers
many Cadence XCC toolchains, happen not to support the "~" operator to
perform bitwise negation. And they generate an absolutely hilarious
series of inscrutable error messages when they try to tell you this
fairly simple fact.
Just fold it into the constant.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reverts commit 3cc14b2c2b.
Revert this due to the same reason as commit
a29b66bbf5:
Unfortunately this mechanism doesn't seem to actually work on the SDK
linker. The emitted sections, when passed a symbol name as the "start
address" just appear wherever the "." variable was pointing (in this
case, into the cached region). That breaks the kernel coherence
layer, obviously.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support of the tests/drivers/spi/spi_loopabck
with dma (V1).
Connect MISO pin (D12) to MOSI (D11) pin on the board
to pass the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch is defining Tx buffers in NON CACHE memory for using
with DMA transfers. This requires the CONFIG_NOCACHE_MEMORY=y
flag when mcu is using CACHE.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Added heap reference parameter to k_free tracing
hook to allow tracing of the pointer which was
passed as a parameter to a k_free call.
As part of this update the defines
(for this hook) in the various tracing formats
was also updated.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
I'm taking over for joerchan at Nordic Semiconductor as a Zephyr
Bluetooth host collaborator.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Avoid rebasing and instead use the commit range. This avoids issues with
trees having intermediate rebase data after a reboot (due to
cancellation).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added forward declarations of types declared
throughout kernel.h at the start of
kernel.h. With this change it is possible to
include tracing/tracing.h early in kernel.h
and use the tracing functionality in
kernel.h functions without compile errors
which would result if tracing/tracing.h
was included at the end of kernel.h
(type dependencies).
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Fix Periodic Advertising Synchronize implementation to
generate Synchronization Failed to be Established event
when 6 AUX_SYNC_IND PDUs are not received when establishing
synchronization.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The commit adds Kconfig options that enables "frugal status list";
when enabled, the status list will be sent with zero, empty and false
values omitted, slightly reducing number of bytes sent as response
from device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit removes mcumgr library, as module, from west.yml
manifest, as the mcumgr library source is now kept within Zephyr
source code tree.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
References to Mynewt have been removed and README for Zephyr has been
merged directly to the README.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit removes MYNEWT sepcific code and code that has been
conditionally compiled with "ifndef _ZEPHYR_".
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit copies code of mcumgr, as a lib, under subsys/mgmt/mcumgr.
Only source files relevant for Zephyr have been copied, and changes
to source files have been limited only to path changes, where
required.
Samples have been left out as the only relevant sample, smp_svr,
is already within Zephyr source tree.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Updates to MEC172x eSPI driver to support ACPI shared
memory region and EC Host Command Subsystem through
ACPI_EC1 and Embedded Memory Interface (EMI).
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Use sys_clock_hw_cycles_per_sec() instead of
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC to determine clock cycles.
Signed-off-by: Michel Haber <michel-haber@hotmail.com>
Updated the Zephyr build process description to include description of
all Zephyr link stages.
It extends the guide with description of the intermediate binaries as
well as the post-processing of those binaries.
- Unfixed size binary
- Fixed size binary
Post-processing
- Partition alignment
- ISR table generation
Build stages images has been updated and new images showing the
post-processing stages of the intermediate binaries has been added.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With `gen_handles.py` now running on the first pre-built image,
`zephyr_pre0.elf` there is no requirement for the device handle arrays
to remain the same size after processing.
Remove the padding generated in `gen_handles.py`, as well as the
temporary option `CONFIG_DEVICE_HANDLE_PADDING` which was added to work
around this issue.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit reworks the linker script generation and linking stages in
order to better support fixed section location as required by #38836.
Today we have the following generated linker scripts and the elf output
depending on the system configuration:
- linker_app_smem_unaligned.cmd --> app_smem_unaligned_prebuilt.elf
- linker_zephyr_prebuilt.cmd --> zephyr_prebuilt.elf
- linker.cmd --> zephyr.elf
as not all linker scripts may be created and as there is a need for the
possibility to move gen handles earlier then those stages has been
renamed into more generic names so that with this commit we have:
- linker_zephyr_pre0.cmd --> zephyr_pre0.elf
- linker_zephyr_pre1.cmd --> zephyr_pre1.elf
- linker.cmd --> zephyr.elf
This also means that is the stage zephyr_pre1 is not needed, then build
can go from `zephyr_pre0.elf` to `zephyr.elf`.
The gen_handles.py has been changed so it now uses `zephyr_pre0.elf` as
input. This ensures that the handles array are final when invoking the
next build and linking stages.
To keep the current behavior of generating the isr table and kobj hash
of what was `zephyr_prebuilt` stage the code blocks contolling isr
generation and kobj hash has been relocated to be located after
app_smem and device handle generation.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Introduce a new global property for source files that are generated from
the initial Zephyr link (app_smem_unaligned_prebuilt). This source list
is used for files which will introduce address shifts into the final
binary, which need to be present in `zephyr_prebuilt.elf` for
`CONFIG_USERSPACE` scripts to correctly generate `zephyr.elf`.
This resolves#38836.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The previous description of the `GENERATED_KERNEL_*` cmake variables
was incorrect in that these are generated after the second link stage
when `CONFIG_USERSPACE` is enabled.
The sources in these variables are generated from `zephyr_prebuilt.elf`
for inclusion in `zephyr.elf`. However `zephyr_prebuilt.elf` is preceded
by `app_smem_unaligned_prebuilt.elf` when `CONFIG_USERSPACE` is enabled.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
