Add some scripts to automatically run a set of BT conformance tests.
Each script has an associated file which selects which subset of tests
are run by that script.
The LL scripts are divided in 2 subsets so as to allow parallelizing
a bit the run (the LL tests take the longest).
Except these, all other sets are just divided by category.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added application for testing the bluetooth stack
from the EDTTool
Signed-off-by: Henrik Eriksen <heri@oticon.com>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
We add a test-suite for the newly introduced feature of
ARM Dynamic Direct Interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move the zero-latency IRQ test into the new
arm_irq_advanced_features' test suite. Skip
running the test for non Mainline Cortex-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Document that the Dynamic Direct interrupts feature is
implemented and supported as an ARM-only API.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commits implements the support for dynamic direct
interrupts for the ARM Cortex-M architecture, and exposes
the support to the user as an ARM-only API.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
With this commit we add support for Dynamic Direct interrupts
for the ARM Cortex-M architecture. For that we introduce a new,
user-enabled, Kconfig symbol, DYNAMIC_DIRECT_INTERRUPTS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added autocompletion to 'sensor get' command. After this change
device and channels are autocompleted. It is possible to provide
multiple channels for reading.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When asserts were disabled then sensor accepted any channel in
hts221_channel_get(). Changed to return -ENOTSUP when invalid
channel is provided.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add documentation for the whitelist initiator behaviour, describing the
one-shot behaviour.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
MPU6050 no longer using Kconfig to specify I2C addresses. Reference
to the removed symbol causes QA diagnostics. Remove the reference;
when AK8975 is converted to devicetree it may be possible to restore
the link between the sensors.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a sample for the MPU6050 that demonstrates on-demand and triggered
display of all sensor data.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a binding for the sensor and replace all Kconfig selection of
hardware parameters with devicetree property values.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When a trigger was enabled the original implementation would do
nothing more than print "Waiting for a threshold event", without
describing what such an event would look like.
Rework to maintain a window of +/- 0.5 Cel around the most recent
in-window temperature, and reset that window whenever a trigger occurs
or a non-trigger reading is outside the window. Time-out and display
the temperature if no event occurs in a reasonable time.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The device address can only be 0x48 through 0x1B. C6 is connected to
the FXOS870 and is not exposed on a header: switch to Arduino D0.
Move this to a boards subdirectory so we can add other overlays
without cluttering the root.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The system power management handling code in the '_isr_wrapper' enables
interrupts by executing the 'cpsie i' instruction, which causes a
system crash on the Cortex-R devices because the Cortex-R arch port
does not support nested interrupts at this time.
This commit restricts the interrupt state manipulations in the system
power management code to the Cortex-M arch, in order to prevent
interrupt nesting on other AArch32 family archs (only Cortex-R for
now).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add binding support for a 'path' property type, for properties that are
assigned node paths. Usually, paths are assigned with path references
like 'foo = &label' (common in /chosen), but plain strings are accepted
as well as long as they're valid paths.
The 'path' type is mostly for completeness at this point, but might be
useful for https://github.com/zephyrproject-rtos/zephyr/issues/21623.
The support is there already in dtlib.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit splits the 'locore' and 'main' memory regions into
separate executable images and specifies the 'locore' as the boot
kernel, in order to prevent the QEMU direct multiboot kernel loader
from overwriting the BIOS and option ROM areas located in between
the two memory regions.
The Zephyr x86-64 kernel image consists of two discontiguous load
memory regions: 'locore' at 0x8000 and 'main' at 0x100000, but the
QEMU treats these as single contiguous memory region starting at
0x8000 and ending at (0x100000 + MAIN_IMAGE_SIZE - 1).
This results in the direct multiboot kernel loader overwriting the
BIOS and option ROM areas as part of the kernel loading process, and
causes any writable system regions to be corrupted (e.g. KVMVAPIC ROM).
By splitting the two discontiguous memory regions into separate images
and specifying only the boot image (i.e. 'locore') as the '-kernel',
it is possible to work around the QEMU direct kernel loading design
limitation.
This workaround is required to support the QEMU v4.2.0 and above.
For more details, refer to the issue zephyrproject-rtos/sdk-ng#168.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
echo_server app doesn't compile (it uses minimal libc which lacks
unistd.h), let's switch to a more fine-grained include here.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Historically, these routines were placed in thread.c and would use the
scheduler via exported, synchronized functions (e.g. "remove from
ready queue"). But those steps were very fine grained, and there were
races where the thread could be seen by other contexts (in particular
under SMP) in an intermediate state. It's not completely clear to me
that any of these were fatal bugs, but it's very hard to prove they
weren't.
At best, this is fragile. Move the z_thread_single_suspend/abort()
functions into the scheduler and do the scheduler logic in a single
critical section.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Drop snprintf() and use snprintk() as snprintk()
is more suitable for the networking code.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
NET_BUF_ASSERT() tranlates into nothing in presence
of CONFIG_ASSERT=y, which is misleading.
Use __ASSERT() in NET_BUF_ASSERT().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
PWM driver for LiteX SoC builder was created.
Because LiteX supports only one channel for each PWM device,
an appropriate restriction was made.
Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Fix bug when connecting using whitelist and split controller.
The peer address was set to an all zeroes address.
Bug using shell:
bt init
bt wl-add <addr>
bt wl-connect on
Connected: 00:00:00:00:00:00 (public)
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In some cases, we've seen the output files be truncated when the
python script has been rebuilt into a .pex before running it --
likely due to buffering.
Closing files explicitly is the right thing to do anyway, so let's
do it.
Signed-off-by: Olof Johansson <olof@lixom.net>
For the native_posix board where hwinfo is not implemented tests were
reporting errors.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>