The generic name is too generic and when it appears on its
own, for example nano_generic_defconfig, it is not
visible what the file is about, so call it generic_arc the same
way the Kconfig platform is called.
Change-Id: Icf737f305d84142dad4f52fd26a5c7481f9fc5be
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This make platform configuration more readable and cover cases when
Bluetooth is enabled and Console disabled.
Change-Id: I17da603915e7e32f8e76f497d91d786ca727ca92
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ARC to the list of architectures sanitycheck will build against.
Change-Id: Ibf1aa3a167a7a53a59b40bde4442d16f7d7b9611
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Enabling more sanity checks for the ARC architecture is an ongoing
process, disable failing tests for now.
Change-Id: I2fdabf98a5648120649649e3e32b849b79b48a7b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add support for a "generic" ARC implementation. This is a misnomer
since ARC platforms are synthesized by the SOC vendor and are specifc
to a given vendors implementation/configuration. This platform
support if for an SOC where we are allowed to let the code to support
the SOC into the wild but not allowed to name it in public.
This change allows to work on support for the SOC in the open and let
the rest of the community see the evolution of of the platform.
Change-Id: Idbb52fc80464ec04e91665871951f6ea79e5299d
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Add Kconfig option to specify how interrupt is triggered for GPIO.
Change-Id: I8db988efb0c081a18e585ccc6dd121bff61d6ccc
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make config variable name match the function. The PIC is never turned
on in the zephyr code so there is nothing to shut off.
Change-Id: I1627e5a35cc37ef7959f36758c1e1aec03e22782
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
These x86 drivers are the last users of the PLB_* macros change to use
the sys_{in,out} functions.
Change-Id: Iebd0ad1bf5e74379498f86b24d835a0430db1311
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Or then the controller will spin around requesting to get its fifo
filled-in though it's unnecessary.
Change-Id: I81e7c483345236dee7691c3e780b1b06d6b2d0f8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add Kconfig option to specify how interrupt is triggered for I2C.
Change-Id: I5f5afdf6bfc2adbfc2f66bdc1f58bd3a8fc60ecf
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This simply copies the PIC disabling code from ia32 into ia32_pci.
Change-Id: Ib48cb96d3f0ba7356431ce1b2221f3f346e61c8d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
toc tree.
In order to gerrit include the recommended practices
guidelines it need to appear in the toc tree.
Change-Id: Ib985fa2238bfd03e780dce2fda4242997f43eb06
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Instead of multiple make options etc. the test are now run
directly from make. User does not need to know various command
line options for setting up pipes.
Change-Id: I62a56aec75c55b970b246051dccdbf458389ab8d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to give the pipe names as the default values can be
used instead.
Change-Id: I610d07b860a32b55e6c68e7b2869218b29c8f304
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate RX and TX buffer count was not set in example
applications prj files.
Change-Id: If48824e894bced3134391dae651f5997820de2c1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The duplicate address detection check was not run properly
in periodic timer. After this patch the IPv6 address is
marked properly as preferred if DAD succeeds.
Change-Id: I2b4ad91b2c851dca51a52635ef2dea92fb5b58b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is only meant for testing the network. This must not be
enabled in live system as it takes memory and processing power
for each sent or received network packet.
Change-Id: I223a087175b19c8561743a1fcceb659be2356c4d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add function that returns the link address that the system
is using at the moment.
Change-Id: Id09aed3f6cbc4cd3ee694e18441f7443f0b7c3bf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure the etimers are triggered in main event processing
function in tcpip.c
Change-Id: Ib521b9291c768245a9f35f3502b3b173abe08ee9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Contiki etimers need polling which is handled by this fiber.
This fiber sleeps until next etimer is to be triggered. If the wakeup
time is long, we wait max 60 sec so that new timers can be triggered
also. This 60 sec timeout might be too long and require tweaking when
we know how the system behaves.
If there are no etimer event in the system, then the timer fiber
will only sleep 2 seconds before checking the timers again. This
interval might need tweaking also.
Change-Id: If34b97073882d8b273941cfb0be36df6aac97cf8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add sample radvd.conf and instructions how to use it in README
file. This is needed if user wants to use IPv6 SLAAC (stateless
address auto configuration) when using qemu setup.
Change-Id: I3c9c34cfcc1bc88117a1c70a5d3ef6b5e56739f1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allocate a new TX net_buf when sending neighbor solicitation
message instead trying to use the existing RX net_buf. This
simplifies and unifies the RX and TX buffer management.
Change-Id: Ia1c42f7fef720ad85fe1c599c3c2ec9ea2c024b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When sending IPv6 packet, make sure that the net_buf is valid.
Change-Id: I0027f42f307c09b3add42f430abf759bd88d63c5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allocate a separate buffer when sending RS, RA and NS ICMPv6
messages to the network.
The ICMPv6 messages are:
RS = router solicitation
RA = router advertisement
NS = neighbor solicitation
Change-Id: Ibe5a1701f78f72dce6460f77e9f659b16c355640
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Debug prints were missing line feeds + spaces in neighbor
discovery code.
Change-Id: I1373af38cc7eae103d1a1da527430f2eb63e6b7a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to disable IPv6 neighbor discovery.
Normally ND should be enabled but for testing purposes
the ND can be turned off as it simplifies the network
setup.
The default value atm is not to run ND because
we do not have a proper network setup. If user is
running qemu image, then ND should be disabled because
ND does not work properly with tun device.
Change-Id: I0ab7d6ee2ea3bc70918d9adf6f44473f71b3bd29
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Neighbor solicitation message sending had a typo.
Change-Id: Ia2a8b5c0eef60acc093463eb24f33bbe8fb93421
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now we can wakeup properly if there are multiple Contiki etimers
in the system.
Change-Id: I356818f4b79427c9bf26afca31b1a0766760ca3d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The clock_delay() function sleeps now correctly either
in micro or nano kernel.
Change-Id: I1df71b64c5f0b46d963ee117252e41be3ddfb1df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IP networking depends on CONFIG_NANO_TIMEOUTS and
CONFIG_NANO_TIMERS support so select them automatically
in Kconfig.
Change-Id: Ib3a86ca5a2006da545bed8c13b631d6a8c45ea99
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This variable is not used outside of c file.
Change-Id: I89b34fb6dd2cdd9dd111b6e33829f170d0ba00ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adds HCI layer event defines to be used by LE Connection Update
Complete event handler.
Change-Id: I5c3502054acd4f838a33c55df8d1eefe1acec6b4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds possibility of setting advertise mode.
If no advertising mode is set, use default value (discoverable).
Change-Id: I86456ca52ad54a2fd4e4c6443a79087ddeb99ec6
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Bluetooth shell now supports advertising type set while starting
advertise.
Change-Id: I1e672b4c9315368dcef38398834acc5541c1843b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes shell a bit more convenient to use.
Change-Id: I50490eb3cf9434723737a71fb382316876ba6291
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This commands print list of all available commands.
On unknown command only short info about 'help' command is
printed.
Change-Id: I780f4fd8da7292192260a0e0af8815fe4e385ae2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reduce usage of static variables making code easier to follow.
Also improve robustness in case of too many parameters provided.
Change-Id: I6a3f0162a4fb301479ed36c54ceca2967bb7e389
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If empty input was provided simply reprint prompt instead of printing
uage information. This makes it similar to linux shell.
Change-Id: Ie4d9e1e7cb011ddf14f490188335ddc44289ffcf
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Style fix - add missing brackets for single instruction if statements.
Change-Id: If37f886949fb8587d6973a19bd2df92af03f7a87
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The minimal/start valid handle value is 1.
Change-Id: Ief3be01d0bf76193350b7632aedebc559d368810
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Use more robust approach when registering shell callbacks. Instead of
allocating maximum number of callbacks use exact memory which is
needed.
Change-Id: I96db75375e8d24df328adc0622c7817a3328f860
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Att data structure passed to read_type callback wasn't set properly
with connection data. This cause parsing att struct set to 0 (casted
in cb, set in att_read_type_rsp). Wrong att data caused parsing wrong
mtu size and whole conn structure.
Change-Id: Ib0aa4b8edca4965afd746e7186a08cfa34e62cf3
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
