This big patch refactors tester application and put it in par with
updated tester protocol.
Change-Id: Ib016fdd0aac58a32bcdc67774843cf65d619947d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If bt_enable() is called from a preemptible context we need to make
sure the RX prio fiber is initialized by the time the HCI init runs
from the hci_rx_fiber function.
Change-Id: I91bb0c69d011944ee2a035b2a707618632a6b189
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no need for local copy of addres. Use pointer instead.
Change-Id: I4681af527813093547d2641ab2390cfa64383d6b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Connection address based on keys is already selected before call to
check_pending_conn. There is no need to select it again.
Change-Id: I2f1a329c19f5c08734c50dbf8d32bf5c28192a35
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is a mandatory characteristic for GAP servie. It must be included
in GATT db.
Change-Id: I27c0c6d56f5303c3c5d1606d7656c51823f74989
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Pass service handles to the callback during service discovery.
Change-Id: I616de5188faf76c84cc02ceb29a6f5aab631b89c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Do not use local _isdigit function, use public isdigit
instead.
Change-Id: Ifc2721fc2def429de4934c9855f08dae30326694
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This option adds optional libc functions that are not directly
used by the kernel but can be used for testing purposes.
This option is experimental.
Change-Id: Ia4dba718359c4f381047a5b52ebddb26d87ea75a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add function for comparing two strings ignoring case.
Change-Id: I2fc78c0a0d0f53e23566ffacd8dca3b23e386c26
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rewrites the LOAPIC timer tickless idle implementation to cover all edge cases.
Change-Id: Ide0a235f298dfc5c75a090a45d1bf8275d81e248
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes tickless idle skew calculation as it is not particularly useful.
The actual "skew" may vary wildly depending upon whether cache is involved
or not.
Change-Id: Ie5c966eba5cdc3cff2610d4c1f3bb673c83ec8b7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes two missed replacements of
_SysIdleElapsedTicks -> _sys_idle_elapsed_ticks
in the timer drivers.
Both were previously missed due to typos.
Change-Id: If55c9624df6f3bd7188e249f74d3ee3de61a68e4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This reduces the defconfig file to only those options needed
for the platform. We also introduce a kernel independent config
file (no micro/nano prefix) that be the default.
Sanity checks depends on the nano/micro file naming, so until it
is modified to support the new model, we keep the old files.
Change-Id: Ife1744d88f7bf229c1da04d5b86db26678af7f6c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The files will have the needed fragments to move a .config
file to either a nano or micro kernel .config. This will let us
get rid of the micro_*_defconfig/nano_*_defconfig in the future
and once the sanitychecks are adapted leaving us with a single
fragment file per platform and thus making it easier to maintain.
Change-Id: If23b32cc259de498816ddc8be15cdd6e0014106a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
"scripts/kconfig/merge_config.sh && make oldconfig" works well
enough for merging local config fragments, but Kbuild currently has
the entry points only for "kvmconfig" and "tinyconfig".
This commit provides the generic target for mergeconfig, so we can
manage our own config fragments easily:
put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/,
and then run "make foo.config".
Now "make kvmconfig" is just a shorthand of "make kvm_guest.config".
Likewise, "make tinyconfig" is equivalent to
"make allnoconfig tiny.config".
Change-Id: I9ea4fd21ac46b42c2b6d87ee7eeeff67768bc375
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Kbuild always runs in $(objtree). Actually, $(objtree) is always
set to "." by the top-level Makefile.
We can omit "-O $(objtree)" and "$(objtree)/".
Change-Id: I17eea62cc3b85957572f9f9eb5207caa1a91f881
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If "make kvmconfig" is run with "-j" option, a warning message,
"jobserver unavailable: using -j1. Add `+' to parent make rule.",
is displayed.
$ make -s defconfig
*** Default configuration is based on 'x86_64_defconfig'
#
# configuration written to .config
#
$ make -j8 kvmconfig
Using ./.config as base
Merging ./arch/x86/configs/kvm_guest.config
[ snip ]
#
# merged configuration written to ./.config (needs make)
#
make[2]: warning: jobserver unavailable: using -j1. Add `+' to
parent make rule.
scripts/kconfig/conf --oldconfig Kconfig
[ snip ]
#
# configuration written to .config
#
Change-Id: Icda8d75af0bb50612cb020874649593c2ed0154f
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The variable "MAKE" is used to store the command name that has
invoked the Makefile. (Actually, it is already set to "make"
if you run this script from a Makefile.)
In this script, however, it is used to determine if Make should be
run or not. It is not what we usually expect.
Change-Id: I6891ecfc5003b4494d72878fa0da00a6ab452b21
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a check for the existence of input files and exit (with failure)
if they are missing.
Without this additional check, missing files produce error messages
but still result in an output file being generated and a successful
exit code.
Change-Id: I8609e00ce99b491dcb1d41e64106a6829dc1fb41
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, "make tinyconfig" does not work with "-j" option.
$ make mrproper
$ make -j8 tinyconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --allnoconfig Kconfig
#
# configuration written to .config
#
scripts/kconfig/Makefile:122: *** You need an existing .config
for this target. Stop.
make: *** [tinyconfig] Error 2
As shown above, "allnoconfig" has created the .config file before
mergeconfig is called, but Make still raises a false alarm because
of some sort of race condition.
We can fix this issue by moving the error check to the shell script.
Anyway, scripts/kconfig/merge_config.sh always requires an existing
.config as a base file. It is reasonable to check its existence in
the shell script.
Change-Id: I4c6b26bf3b19c5d5b19ed43ee6b553f7a5944c21
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I5fdbe712db8e15031c8c214c0d4378f8508d03da
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Two or more arguments are always expected. Show usage and exit if
given less.
Change-Id: I1e503495f34eab3f181238a1aa877a4aee3b7e5e
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the future there will be no need to deal with such updates anymore.
Change-Id: Ib66b826f054f444ccb8f7e6f0e6a31e8d93f342f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
TinyCrypto includes files are in 'include' subfolder.
Without this patch one is required to include eg
#include <include/aes.h>
instead of
#include <aes.h>
Change-Id: I4a761a107d819400ad39cc0e3fb918bed2df4ab4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Due to similar padding issue as pipe, the list of task object
may not be used directly. As mentioned before, some compiler/linker
may pad the large struct. For example, compiling under gcc and
march=i686 pads the struct to 32-byte alignment (march=atom to
64-byte alignment). This causes issue with sizeof() and pointer
arithmetic because they have no idea about the padding.
When the stars align in a certain way, these task structs may be
corrupted. So add a task pointer list and use it for task
manipulation. The task list remains as it is beneficial to group
them together to take advantage of cache locality.
Change-Id: I0e86bfe05742040f4540d7854c1ac14e76162776
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
should be nanokernel_semaphore instead of nanokernel_semaphores
Change-Id: Iada05a2367eaf2a754c3678893147b11c7cfade7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Format code blocks inside the main list, otherwise every block of code
breaks the list.
Change-Id: I6d48a0a3f8a3fedc832ebd9523eef52ea730b218
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Removed steps are not needed since Galileo grub from SPI loads grub
from SD card directly and user gets confused with unneeded
instructions.
Change-Id: I65aa114b808e0ac8dc8e6c3eb62ba4a51e2dbf2a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When line is split the html output does not format list correctly.
Change-Id: I942529d134ec6afc65ae11400a2702d5d7051cbd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use low case directories for grub and kernel and align them inside
list.
Change-Id: If701dc3520f823dd184e70f410141a8a2349edd3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The current list is broken with output like below:
...
:file:` microkernel.elf` to the $SDCARD/kernel folder
...
Change-Id: I977f8365a2da9d25e34f39fb31407a31dd062f61
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This makes platform configuration more readable and cover cases when
Bluetooth is enabled and Console disabled.
Change-Id: I49aba6e47031de86f4bb5fbe988495a1db318666
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of loading all indexed doxygen symbols in one page, we
use the defined groups to load the API documentation in the specific
sections and reduce the trash coming from doxygen to just what we
need.
Change-Id: I030e3de33e8cc26871f95cd45a50af0cae1bb942
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also add conditionals to hide internal functions
Change-Id: I795e540ec082244f77f02cf8347b3e74916e4402
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some functions are behind ifdefs, so defining those to allow
indexing and displaying in the documentation.
Change-Id: Id48dcc59b0793e0788f44ebd7c172f0bf3253ed2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
