Add support for "absolute" timeouts, which are expressed relative to
system uptime instead of deltas from current time. These allow for
more race-resistant code to be written by allowing application code to
do a single timeout computation, once, and then reuse the timeout
value even if the thread wakes up and needs to suspend again later.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a CONFIG_TIMEOUT_64BIT kconfig that, when selected, makes the
k_ticks_t used in timeout computations pervasively 64 bit. This will
allow much longer timeouts and much faster (i.e. more precise) tick
rates. It also enables the use of absolute (not delta) timeouts in an
upcoming commit.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit adds a filter to restrict the `arch/arm/arm_runtime_nmi`
test to the ARM Cortex-M platforms only, since this test currently
does not support the Cortex-A and Cortex-R platforms.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit enables nested interrupt test for the Cortex-A platforms
that use the ARM Generic Interrupt Controller (GIC).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the nested interrupt testing support for the ARM
Generic Interrupt Controller (GIC).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We rename the nRF91 Dev Kit board target (nrf9160_pca10090)
to nrf9160dk_nrf9160. We update all associated references
in the supportive documentation and all nRF9160-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds an explanation comment for the interrupt priorities
used by the Cortex-M nested interrupt test.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Do not attempt to build on all boards. Instead, do a build-only pass
of the generic test case on all boards with EEPROM support.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the dts_fixup.h with a DTS app overlay file instead. We have
sensors that show up on both the I2C and SPI busses, and we disable
the sensors to match how the tests work currently.
The app.overlay utilizes the testing dts bindings to create test nodes
that should not conflict with any existing SoC nodes. Thus allowing the
test to run on any platform.
The dts overlay is structured such that i2c.dtsi and spi.dtsi are
generated with default values for required properties. We than update
device properties for those nodes that the defaults are sufficient for
one reason or another.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate bt_create_conn_le and rename it to in order to add return
code, new arguments and to follow the established naming convention.
Add API for the application to control the scan parameters of the
initiator role. This allows the application more scheduling control
of the initiator in multi-role scenarios. Also provides options to
configure the initiator for LE Coded PHY for long range support.
We deprecate the old way of creating connection to make the name more
consistent with the rest of the API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Identify when received PUBLISH message is malformed and overall packet
length received is smaller than parsed variable header lenght.
Add unit test to cover this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The standard allows up to 4 bytes of packet length data, while current
implementation parsed up to 5 bytes.
Add additional unit test, which verifies that error is reported in case
of invalid packet length.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The following commit:
commit 407b49b35c (refs/bisect/bad)
Author: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Date: Wed Feb 12 15:00:46 2020 +0100
cmake: use find_package to locate Zephyr
breaks as we don't find the ZephyrUnittest package. For now revert to
the old means until a proper fix can be made.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit disables the nested interrupt test for the RISC-V platform,
as interrupt nesting is not supported on the current RISV-C
architecture port.
Furthermore, the current `trigger_irq` implementation for RISC-V is
mostly incorrect and cannot be used, so there is no point in leaving
that in the codebase (see #23593).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current nested interrupt test implementation is both buggy and
fundamentally flawed because it does not trigger a higher priority
interrupt from a lower priority interrupt context and relies on the
system timer interrupt, which is not fully governed by the test;
moreover, the current implementation does not properly validate the
test results and can report success if no interrupt is triggered and
serviced at all.
This commit reworks this test to have the following well-defined
and logical procedure:
1. [thread] Trigger IRQ 0 (lower priority)
2. [isr0] Set ISR 0 result token and trigger IRQ 1 (higher priority)
3. [isr1] Set ISR 1 result token and return
4. [isr0] Validate ISR 1 result token and return
5. [thread] Validate ISR 0 result token
The reworked test scenario ensures that the interrupt nesting works
properly and any abnormal conditions are detected (e.g. interrupts not
triggering at all, or ISR 1 not being nested under ISR 0).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit re-organises the kernel interrupt tests for consistency.
In addition, it removes any references to the `irq_offload` feature,
which is no longer used by this test.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Changing ZEPHYR_BASE throughout Zephyr tests and samples revealed that
intel s1000 crb cache test case could not be run on CI.
This has now been fixed by moving the tests file located in
tests/board/intel_s1000_crb folder into tests/board/intel_s1000_crb/main
instead so there is now main and cache folders with test projects.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The board target for emulation of nRF52811 on nRF52840 DK, so far
known as nrf52811_pca10056, is renamed to nrf52840dk_nrf52811.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove a side effect in an assertion check of the
expected reason after spurious interrupt handling.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit changes the behaviour of the CMSIS-RTOS periodic timers to
have an initial timeout equal to the periodic timeout instead of
executing the callback function directly when calling the
osTimerStart(...); function.
This behavioural change is according to the CMSIS-RTOS specification.
Signed-off-by: Måns Ansgariusson <Mans.Ansgariusson@AssaAbloy.com>
These are short-circuiting utility helpers that can save typing
in situations where avoiding evaluation of the not-taken branch
skips invalid expressions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is joint work with Kumar Gala (see signed-off-by).
Add helper macros which abstract the "true names" of each of the four
types of node identifier we intend to support (e.g. DT_ALIAS(),
DT_INST()).
These can be passed to a new DT_PROP() macro which can be used to read
the value of a devicetree property given a node identifier from one of
these four other macros, and the as-a-c-token name of the property.
Add other accessor macros and tests as well.
Add some convenience APIs for writing device drivers based on instance
numbers as well. Drivers can "#define DT_DRV_COMPAT driver_compatible"
at the top of the file, then utilize these DT_INST_* macros to access
various property defines.
For example, the uart_sifive driver can do:
#define DT_DRV_COMPAT sifive_uart0
Then use DT_INST macros like:
.port = DT_INST_REG_ADDR(0),
.sys_clk_freq = DT_INST_PROP(0, clock_frequency),
For convenience working with specific hardware, also add:
<devicetree/gpio.h>
<devicetree/adc.h>
<devicetree/spi.h>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We update README file to correct the text for k_cpu_idle
testing, since now we cover the test for both tickless
and non-tickless kernel configuration.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We fix the kernel.context test, so it tests the
implementation of k_cpu_idle for tickless kernel.
As most platforms now support tickless kernel by
default, this extension of the test is essential
to get coverage on k_cpu_idle() API.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Recently added test for pthread_getname_np()/pthread_setname_np()
functions used uninitialized array value. As we can't check behavior
for arbitrary uninitialized value, but at most NULL value, make the
test calls to explicitly use NULL, to make the test intent clear
(instead of for example initializing the original array with zeros).
Also, these test cases use variable names not consistent with Zephyr
codestyle, and named to generically to cause confuse when used in a
general context of the test_posix_pthread_execution() function, so
rename them to be specific. (And alternative would be to separate
pthread_getname_np()/pthread_setname_np() tests into a separate
function, but it was indeed practical to piggyback them on existing
test_posix_pthread_execution()).
Fixes: #23473
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The documentation motivates this function by saying it is more
efficient than the core 64-bit version. This was untrue when
originally added, and is untrue now. Mark the function deprecated and
replace its sole in-tree use with the trivial equivalent.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The `xlnx,ttcps` binding, despite having the file name of
`xlnx,ttcps.yaml`, had the compatible property of `cdns,ttc`.
While it is true that the Xilinx ZynqMP platform embeds the Cadence
Triple Timer Counter (TTC) IP core, its TTC differs from the original
Cadence core in that it implements 32-bit counters, instead of the
16-bit counters defined in the original; hence, the Xilinx variant is
not compatible with the original Cadence version and should be treated
as a different device.
This commit changes the `xlnx,ttcps.yaml` compatible property to
`xlnx,ttcps` for the above reasons.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The `tests/kernel/context` test fails for the `qemu_cortex_r5` when the
icount emulation mode is used, because the Xilinx QEMU ignores the WFI
instruction when the icount parameter is specified.
This will be fixed in the Zephyr SDK 0.11.3 and this commit must be
reverted once the CI is updated to use this new SDK version.
For more details, see zephyrproject-rtos/sdk-ng#191.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The IIS2MDC is a 3D digital magnetometer ultra-low power sensor
for industrial applications, which can be interfaced through
either I2C or SPI bus.
https://www.st.com/resource/en/datasheet/iis2mdc.pdf
This driver is based on stmemsc i/f v1.02.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
