Enabled use of ticker must_expire feature for ensuring ADV timing
randomization, even when ADV doesn't get air-time. This reduces ADV
collisions. Not active for nRF51 platform for now.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added support for vendor specific meta data in LLL conn object. This
enables vendors to add state data to connection, for supporting
specialized BLE slave features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix regression introduced in refactoring of use of SWI.
Reduced use of SWI cannot be used in combination with
CONFIG_BT_CTLR_LOW_LAT as additional SWI is required
to split ticker WORKER and JOB contexts in order to
disable JOB but keep WORKER enabled.
Regression introduced in commit 78b461ae3e ("Bluetooth:
controller: Refactor use of SWI").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The callback function has been ignored in z_timeout_init() since the
timer rework in fall 2018. Passing real handlers to it in code is
distracting when they will be overridden by whatever callback is
provided in z_add_timeout().
As this function is an internal API deprecation is not necessary.
Remove the parameter and change all call sites to drop the argument.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Calling indicate or notify on a disconnected connection object would
result in the error code ENOMEM when failing to acquire buffers instead
of the expected return code ENOTCONN.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The test suite is filled with tests that make assumptions (e.g. about
exactly when other threads will be scheduled) that don't work when
there is another CPU available to handle the load.
Add a feature to the test suite that can "hold" all but one CPU while
the test executes, leveraging the very nice setup/teardown callbacks
to do it. When there is only one CPU, this becomes a very fast noop
of course.
Note that the hold is done by disabling interrupts and spinning, so it
comes with significant CPU cost and tends to drive up the load on the
CI system (and cause other spurious failures on unrelated tests!), so
this can't be used for long-running test cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Stop linking interface libraries against zephyr_interface. This is
cargo cult code that in practice does nothing.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The start timestamp was supposed to signify the starting point of the
clear procedure. The code was incorrectly initializing it to the *end*
point of the procedure.
Fixes#19263
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Do not check size of REQUEST_BUFFER for Data stage IN
transactions. The check can not be done effectively because
the pointer (usb_dev.data_buf) can be changed and the actual
size of the buffer used is unknown at this point.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Some modules use snprintk to format the settings keys. Unfortunately
snprintk is tied with printk which is very large for some embedded
systems.
To be able to have settings enabled without also enabling printk
support, change creation of settings key strings to use bin2hex, strlen
and strcpy instead.
A utility function to make decimal presentation of a byte value is
added as u8_to_dec in lib/os/dec.c
Add new Kconfig setting BT_SETTINGS_USE_PRINTK
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
When not using ticker compatibility mode in legacy
controller, ticker job should not be disabled inside radio
events.
Ticker compatibility mode was introduced in
commit 3a9173afe1 ("bluetooth: controller: Revised ticker
for improved conflict resolution").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This file contains redundant definitions of a bunch of nRF IRQ numbers
(not all, however) that only generates confusion, as enumeration values
provided by MDK can be used instead.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit implements generic function to decide
witch functions to call for selected value name with given
loading parameters.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This commit allows loading data from settings permanent storage
directly to the given callback function.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
The nRF52811 Radio is similar to nRF52840 and exhibits
similar Radio Timings constants. We align the LE Coded
PHY (S2) RX chain delay with that of nRF52840, which,
eventually fixes the TIFS for nRF52811. In nRF52840 we
correct the inline comment only.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added CONIFG_LOG_BLOCK_IN_THREAD option to block until buffer for
log message is available. When log message is called in the thread
and there is no buffer available in the pool, thread will block with
configurable timeout (CONFIG_LOG_BLOCK_IN_THREAD_TIMEOUT_MS). If
buffer cannot be allocated by that time, message will be dropped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
We don't really have docs on how fatal errors are induced
or handled. Provide some documentation that covers:
- Assertions (runtime and build)
- Kernel panic and oops conditions
- Stack overflows
- Other exceptions
- Exception handling policy
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Cast a %lld argument to long long int. This is causing warnings on
recent GNU Arm Embedded toolchains, which fail the build with
-Werror=format=.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
We have introduced option HAS_HW_NRF_RADIO_BLE_CODED, which
reflects that an nRF SoC has a Radio with LE Coded PHY
capabilities. We now modify all #ifdef expressions for
Coded PHY in the nRF controller port, removing SOC_NRF52840
and adding this new option instead. This allows to build
an nRF controller with Coded PHY support for SOCs other
than nRF52840.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Nordic nRF52811 SoC has a 2.4GHx Radio which supports
LE Coded PHY, so we add the option to build a BLE
Controller for nRF52811 platforms with LE Coded PHY
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable possibility to configure time a slave will wait until
start of connection parameters update procedure after BT connection
is established.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
* The issue is found in supporting offload module esp8266
* For device like esp8266, it's responsible for tcp/udp handling,
no need of net_tcp related functions
* This commit is only tested for esp8266, no gurantee for other
modules
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Currently the CONFIG_NET_ROUTING option has limited use as there
would be some entity that populates routing table. Previously it
was RPL that did it but RPL support was removed some time ago.
Fixes#16320
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The boot time measurement sample was giving bogus values on x86: an
assumption was made that the system timer is in sync with the CPU TSC,
which is not the case on most x86 boards.
Boot time measurements are no longer permitted unless the timer source
is the local APIC. To avoid issues of TSC scaling, the startup datum
has been forced to 0, which is in line with the ARM implementation
(which is the only other platform which supports this feature).
Cleanups along the way:
As the datum is now assumed zero, some variables are removed and
calculations simplified. The global variables involved in boot time
measurements are moved to the kernel.h header rather than being
redeclared in every place they are referenced. Since none of the
measurements actually use 64-bit precision, the samples are reduced
to 32-bit quantities.
In addition, this feature has been enabled in long mode.
Fixes: #19144
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Neither of these options is actually used; CPU_CLOCK_FREQ_MHZ appears
to have been part of x86 BOOT_TIME_MEASUREMENT at some point, and
PERFORMANCE_METRICS is the stillborn cousin of EXECUTION_BENCHMARKS.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Remove ctf_middle layer and have only ctf_top and ctf_bottom.
Port functionality from ctf_middle to ctf_top and remove
ctf_middle.h file. Update associated documentation.
Signed-off-by: Mrinal Sen <msen@oticon.com>
This moves check_perm code under GAT and make use of it to check if CCC
write permission can be attended by the connection security level or if
it needs to be increased.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to set different permissions to CCCD so security can
be checked when enabling notification which conforms to:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2360:
'3.3.3.3 Client Characteristic Configuration
Authentication and authorization may be required by the server to
write the configuration descriptor.'
In addition to that also ensure that notification are not re-enabled
until the proper security level is reached to conform to the following
statement:
'10.3.1.1 Handling of GATT indications and notifications
A client “requests” a server to send indications and notifications
by appropriately configuring the server via a Client Characteristic
Configuration Descriptor. Since the configuration is persistent
across a disconnection and reconnection, security requirements must
be checked against the configuration upon a reconnection before
sending indications or notifications. When a server reconnects to a
client to send an indication or notification for which security is
required, the server shall initiate or request encryption with the
client prior to sending an indication or notification. If the client
does not have an LTK indicating that the client has lost the bond,
enabling encryption will fail.'
Fixes#17983
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds support for SDSCv1 and SDSCv2 cards. It has been tested
with 2 GiB SDSC and 4 GiB to 32 GiB SDHC cards from SanDisk.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Remove logging helper variable `trace_dir` from device configuration
data when it is not needed.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
When a test fails intermittently there is currently no alternative to
looking at logs and pressing a hardware reset button. This commit
adds a Kconfig option that can be set when diagnosing an intermittent
failure. The behavior is to do a cold reset of the board when the
test passes. A counter is maintained in noinit memory to track the
number of times it takes to reproduce a failure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add GATT initializer macro for GATT CCC and allow the
BT_GATT_CCC_MANAGED to accept an already initialized CCC user data.
This allows the application to specify the storage location of the CCC
user data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
CCC storaged is no longer declared separetly so check if ccc->cfg
matches with sc_ccc_cfg no longer works so instead use the cfg_changed
callback and match against sc_ccc_cfg_changed.
Fixes#19267
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Initial thread creation and tracing information
occurs with empty thread names. For better tracing information,
we need to a way to get actual thread names if they are set
in order to better track thread names and their IDs.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
When overwriting an NVS item with data that was a truncated version of
the existing data, the "is this already saved" logic was ignoring the
differing lengths and not saving the new item because the data matched.
Fixes#19250
Signed-off-by: Justin Brzozoski <justin.brzozoski@signal-fire.com>
console_register_line_input has been deprecated for at least 2 releases
so we can now remove it. Remove native_stdin_register_input that is
associated with console_register_line_input.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we are getting an old net_context, clear the content of it
in order to make sure we do not have old data in it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
