Set limited amount of tries to write to USB control endpoint EP0.
Fixes#16223
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch add tty runtime initialization check for console support
routines. Without it callers of routines API are not aware that
initialization of tty was failed. This patch basically checks
availability of console device and also its support for
interrupt driven transfers if routines are configured to use it.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
Switch form using privater FCB error codes to
errno codes. FCB private codes convention were compatible
with <errno.h> codes:
- 0 mean success
- negative values mean errors
- similar error types.
There was no sense to kept private FCB error codes.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
1) Dump time sinse last scheduler call
Could be handy for tickless kernel debug.
Will indicate that no rtc irq is called
2) Dump current timeout of each thread
Could be used to find yout when thread will wake up
3) Dump human friendly thread state
4) Use shell_prin instead shell_fprintf
Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
Added ll_rx_link_inc_quota to allow vendor to manipulate
mem_link_rx.quota_pdu when cleaning up nodes via ull_vendor.h.
Signed-off-by: Morten Priess <mtpr@oticon.com>
In setup messages addressing classes, USB standard defines that wIndex
constains interface number encoded in bits 0..7. Bits 8..15
are reserved and normally set to 0. However, in Audio Class they contain
entity number. Hence the need to filter 8 bits for getting interface
number.
Signed-off-by: Bartosz Sokolski <bartosz.sokolski@nordicsemi.no>
Corrected the amount of bytes copied for port handling in parse_ipv6
to prevent reading past the boundaries of the input string.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Add new RD Client API of lwm2m_rd_client_stop() for this
Fix issues of de-register and event reporting in RD Client
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround, defer peer initiated encryption while local
initiated procedure with instant is not complete. Peer
master has sent CONN_UPDATE_IND in response to
CONN_PARAM_REQ, and also has initiated a Encryption Setup
thereafter. In this case, avoid corruption of the connection
update context by deferring the Encryption Setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the inclusion of the littefs Kconfig options inside the
'if FILESYSTEM' block so we don't leak Kconfig symbols if FILESYSTEM
support isn't enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add iterator function to iterate over all connection objects.
Make type a bitmap so that it can be used as a bitmask to select which
conns to receive foreach callback.
Use foreach function internally where possible.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allows the user to pass a provisioning input complete callback to the
provisioning module, letting the application stop displaying its output
OOB value when the other party finishes their OOB input.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Made BT_HCI_TX_STACK_SIZE configurable and added BT_HCI_ECC_STACK_SIZE.
These changes are necessary to allow vendors to adjust for other
achitectures.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Rework the BT_ASSERT infrastructure with the following changes:
- Transition from LOG() macros to printk()
- Allow the BT_ASSERT() macro to map directly to stancard __ASSERT()
- Allow printing of the assert reason to be disabled
- Switch from k_oops() to k_panic() configurable
There are 2 reasons for using printk() instead of LOG():
- BT_ERR uses deferred logging by default, which is problematic with
ASSERTs
- The __ASSERT() macro in Zephyr uses printk()
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix issue when checking if SMP pairing procedure is allowed to use the
SMP debug keys. This check did not consider the case where the keys
pointer was assigned, but did not contain a valid LTK key.
This resulted in being unable to pair with debug keys without an
existing bond.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix shell build dependencies, subsys/bluetooth/controller is only added
for CONFIG_BT_LL_SW_SPLIT or CONFIG_BT_LL_SW_LEGACY.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The return code of set_random_address is not always handled. This could
lead to connection using the wrong Identity address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
nrf_timer.h and nrf_ppi.h are included by including
radio_nrf5.h, so we do not need to include them in
radio.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enabled TEST_USERSPACE_WITHOUT_HW_STACK_PROTECTION
Kconfig option by default for ke1xf SoC Series, which instructs
the build to disable HW stack protection from tests that are to
run with User Mode enabled. This is done because this platform
does not have a sufficient number of MPU regions to support HW
stack protection (Stack Guards) and User Mode simultaneously.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces a new Kconfig option in the testsuite
sub-system, which allows us to disable HW stack protection from
tests that run with user mode enabled.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove incorrect LL_ASSERT check in Lower Link Layer that
checked for invalid connection handle on reception of PDU.
The assert is not needed as PDUs can be received until the
Upper Link Layer is aware of the acknowledgement of the
terminate ind PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add workaround for advertising data issue in the internal bluetooth
controller. The advertising data must be set after advertising
parameters in order to successfully update the advertising data after
an directed advertiser has been active.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make sure that the last entry added is deleted correctly by storing the
fact that one was found in a local variable.
Fix by Laczen JMS <laczenjms@gmail.com>
Fixes#18813.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix handling of Rx-ed PDU on termination, do not process
Rx-ed control PDUs and release the PDU buffer back to the
free pool.
Without this fix, Rx-ed control PDU was responded with a
Tx PDU, which did not get acknowledged or released.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The usdhc driver was incorrectly post-decrementing a do/while loop
iterator, causing an extra iteration of the loop and an out-of-bounds
array access. Change the iterator to decrement within the loop instead.
Tested samples/subsys/fs/fat_fs on the mimxrt1050_evk board.
Coverity-CID: 203403
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Endianness bug fix in bt_uuid_create function.
Replaced bt_uuid_create_le with bt_uuid_create which
handles both UUID from air and internal varaiable.
Fixed bug with endianess in case of big endian targets.
Signed-off-by: Akshatha Harishchandra <akhr@oticon.com>
The LwM2M implementation for DNS resolving has checks which
configure hints based on whether IPv4 or IPv6 are enabled.
Neither of them need enabled if using NET_SOCKETS_OFFLOAD,
which then causes an error to be returned to due to
"hints.ai_family" not being set.
Also the offload API need to know when to free the allocated
"struct addrinfo" instead of calling free() generically,
thus let's use the freeaddrinfo() API for sockets which will
call into the offload API if needed.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18765
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
When an opcode doesn't have a handle that doesn't mean it is unknown
just that it will not be handle as it could have been disabled.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
SMP shall be considered internal TX notify callbacks so they are
allowed to be run from TX thread context like the others.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When CONFIG_BT_GATT_CLIENT is not set att_op_get_type would return
unkown operation instead of properly return the opcode.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since bt_l2cap_create_pdu can return NULL when used under syswq context
the code should always check its result, this also changes the timeout
to have a specific value (RTX maximum timeout) so signalling PDUs still
wait for a buffer to become available.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In certain cases there could be no buffer available which may lead to
NULL being returned by bt_l2cap_create_pdu so instead use
bt_l2cap_create_pdu_timeout to wait with a specific timeout.
Note that this should also ensure the SMP will not be waiting for a
buffer when the remote might have timed out already.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_conn_create_pdu_timeout function which can be used
to provide a timeout when allocating a buffer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
