This commit fixes an issue with the inclusion path for the
board.h file for the pentium BSP.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I28172f8071b907aa61660ec8b8009e83cb2aa5ea
This commit adaptes the Kbuild system to the change of location of
the header files for drivers.
Old location: driver/
New location: include/driver/
Change-Id: Ic49d373149ee44d781419c5c68e59408c8ef1c11
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes issues to allow build on ARM architecture.
- It fixes the include paths in Makefiles.
- It fixes the include path for the offsets.c compilation.
- It fixes the linker command. This changes is needed because gcc
ARM cross-compiler does not accept an AT() command without
specifing an address explicitly. This corner case appears
on ARM architectures when XIP is disabled.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ief8b53c4cc154abba7b7827121ec5a56f62b7b26
This commit fixes the include path for quark BSP.
Change-Id: Idb9b5124476c0bec2d16a143407cd9d0c42e0801
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Makefiles that describe the object-bundles
for the drivers directory and every subdirectory below.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id77cff9cf0ab51827acc2aef32cbed3ec3ad586b
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the drivers directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I924835ece11a3d597e77a55ace21d724dd5ddbe5
Now that UART drivers are configured internally when it comes to
hardware specific information such as IRQ and registers (or mmaped
registers), bluetooth UART driver no longer needs to do it by itself. It
only requires to select the port it wants to use.
Change-Id: I5a30500f4b6f4155292609d0ed4a758f91930817
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
UART is configured statically into the driver directly and not anymore
in the board's system.c. Thus limiting the information to be scattered
into 2 files instead of 3. Then in future, it will also be possible to
remove driver specific informations from the generic UART API structure.
Change-Id: I001f2a6834df9a41ab395a80e4e39b347d545db3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now for x86 platforms, UART is configured statically or dynamically into
the driver and not anymore in the board's system.c. Thus limiting the
information to be scattered into 2 files instead of 3. Then in future,
it will also be possible to remove driver specific informations from the
generic UART API structure.
Change-Id: I7b7fa37f10f88316a4d375c99de3bbacf152a3e3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove camel case style on baseAddr, changing it into base.
Change-Id: Iea1e2d204a38912f4157cc6776a88640e29a04f6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using "which" is somehow awkward to use when 'port', on the contrary, is
blatantly more readable.
Change-Id: I355c6e09d7c27b4b07ab6cd10b772a632855516b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using "which" is somehow awkward to use when 'port', on the contrary, is
blatantly more readable.
Change-Id: Id4d3786a192a650ca042024521b94e557a3ec7e8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This fixes many issues around PCI enumeration from old API:
- a static internal table was fed with scanning results, thus eating
memory, and worse: due to the limit of its size, scanning for new
classes was impossible unless growing statically the size of this
table --> more memory eaten! Not to mention PCI enumeration is done
once at boot time for driver initialization and that's all, so this
table is hanging around for nothing afterwards.
- one needs first to scan a class, then maybe he will be able to find
his device via pci_dev_find. Where all could be done at once.
- pci_dev_find was not trustworthy due again to the internal table. Now
if the device is not found, one will know it really went through all
the possbilities.
- still let the possibility for hard-coded BARs value on driver side
(thus no PCI scan required). However this is greatly advised not to do
so as BARs might change over a firmware/BIOS update.
Comparison:
old pci_dev_scan: could only filter out via class mask.
new pci_dev_scan: can filter out via a class, a vendor and device ID
(it could easily do the same for Function and BAR index as these are
usually fixed and informed through datasheet)
old pci_dev_scan: was limited in its findings by the size of the
internal result table.
new pci_dev_scan: can proceed through all the buses and devices every
time (there are optimizations to avoid useless work of course)
old results did not tell about the function or BAR index.
new one tells, and the structure has not bloated.
old internal code: was storing a big table of results
new internal code: is only storing a small lookup structure and an
array of Bus:Dev pairs for each PCI class for optimizations purpose.
(though, if needed, we could disable this through some #ifdef)
Usage:
- Have a local struct dev_info
- Fill it with what you want to look for, currently: only class and
vendor_id/device_id. Function and BAR index could be added if needed.
- Call pci_bus_scan_init(): this will reset the internal lookup
structure.
- Call pci_dev_scan(<a pointer to your dev_info>): at first call, the
internal lookup structure will pick up the informations from dev_info
and will try to find out what has been requested. It will return 1 on
success, or 0. On 1, your dev_info structure will be updated with the
found informations. If more devices can be found against the same
lookup informations, just call again pci_dev_scan(<a pointer to your
dev_info>) as long as it returns 1. When 0 is hit, it will mean you
found all.
Change-Id: Ibc2a16c4485ee3fed7ef4946af0ece032ae406e4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some checkpatch issues were solved by scripts leaving other problems
such as alignment and indentation issues. In order to comply with the
defined coding style the following fixes were made:
- Fixed the function declaration moving the parameters' comments above
the function in accordance to the doxygen format.
- Fixed functions' opening and closing brackets. These brackets should
not be indented.
- Fixed the 'if', 'for' and 'while' statements adding the brackets
around the sentence.
- Fixed comments' alignment.
- Fixed indentation.
The work was done manually and submitted as one commit. I didn't
separate these changes in different commits because they were fixed all
at once. Basically, all errors were fixed in every file at once.
Change-Id: Icc94a10bfd2cff82007ce60df23b2ccd4c30268d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Replace duplicate code and will allow for further cleanup by possibly
consolidating micro/nano code that is currently guarded by preprocessor
conditionals.
Change-Id: I9aa9966c581244646b6ea317ef8b51fef9054dd4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The correct call is nano_isr_lifo_put, but they are aliases of each
other, so that never caused an issue at runtime.
Change-Id: Ibec8e6d3377133e5e67589c5a3ad1b8fb3cc652c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Make serial console interface more robust. Enables interrupts only
when registering input, all memory is managed inside application.
Interface to application is changed to have two fifo queues. One
queue is a free line slots and another queue is keeping entered
lines. This way memory for lines is managed inside application which
provides free lines queue. It is also simpler to manage entered
lines by sleeping on fifo_get on app layer.
Change-Id: I4776c03eddd1e7d880df3b902bd48f5f2c901cad
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The coding guidelines make an exception to the Linux kernel style
where all branches, even one-liners, should use braces.
Change-Id: I368930af3033eac15f0152a6671909e401d332e6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ifadb978e31770eb9f4987a3205483aad9a525b86
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ib426dad55e318bb8176c4e7660711db1484cc245
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I6098649b507dae09d4d0f19e712bc0fe3686dfc0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ie0770bd9ff872a9ed2b567baca1514d15fe6c90a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iee0936e2c92f2979b7e38f33a950108bdaf6f2c1
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I1f95ae3c2fd44ae3bd366cd33208551cf5ea6d10
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5681dc0c33cc42ee48270eab418c99cc923f96b1
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Id7391e40bb709f03c58f552d6b783cad834bbdcc
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I28cbf0d02600d31548393870e712e6da062048da
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ic28658f68d473b3a163fe5d97f611bfd572f140e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I31e267c1479dfaeeb0fba8c6ba0da45a3c011c0f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I80ccb884f1ffd8f3740cd9298787462485b08024
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
In order to have a better compiler support consolidate
inline assembler code in a set of header files.
If another compiler is used, that supports a different
inline assembler format, asm_inline_<compiler name>.h
heder files have to be provided.
Change-Id: Iecc7d96419efd767a8463933badd4db4a557de5b
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Configuration option BLUETOOTH_DEBUG_UART enables debug support for
Bluetooth UART driver.
Change-Id: I192f380be492df1a52ad212239447b6ee4b50aac
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When the 'len' and 'min' parameters passed to bt_uart_read() are equal
the function is guaranteed to always return 'len' (it will keep
looping until that). This patch removes bt_uart_read() error checks
which would never occur in practice.
Change-Id: Icd879f1e15c6d33acc549155aabd24490098ffc5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are some places where it's forgivable if bt_uart_read() wasn't
able to read as many bytes as requested. In other places it's not
acceptable (e.g. when reading ACL or event header). To avoid failing
in situations where we can handle receiving less data than requested
this patch adds a new parameter to bt_uart_read() to specify the
minimum required data amount.
Change-Id: I372e3af7aaa6bfabe14896eb10cc71c3deff94f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If we're out of buffers the UART driver would previously loose sync of
where the packet boundaries go, because it was using the buffer itself
to store and parse the HCI packet headers. This patch modifies the
UART driver to use stack variable for initial header parsing, thereby
being able to always determine how many remaining bytes there are and
cleanly discard the bytes until the beginning of the next packet.
Change-Id: I278f3fc0c983e6a2a6904356ef1af1d25c9f06e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If we get an invalid packet type here the buf pointer will be NULL.
Going to the cleanup section at the end of the function would trigger
a bt_but_put() call which would cause a NULL pointer access. Directly
returning from the function is the right thing to do instead.
Change-Id: I0c18646e0820cf829ef8aa3f77835ba0a14375b5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We may soon want to have a _wait() variant of bt_buf_get, so to avoid
the number of 'get' function growing too large consolidate the
existing get() and get_reserve() functions into a single one. The new
consolidated function also takes the type as input parameter so that
we know this from the very start and thereby plan for the split into
multiple buffer pools.
Change-Id: Ia09448565349def2be9bc08d9510fedd029480b4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll soon want to have dedicated pools for outgoing and incoming ACL
data. To know from which pool to get and put the buffers each buffer
should contain enough information to distinguish the two types. This
patch splits the old BT_ACL type into two new BT_ACL_IN & BT_ACL_OUT
types.
Change-Id: I7d3c05c26d2a70f80fb1229e245aa21673ec378b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of drivers/pci/, the public API headers will be found in
include/drivers/pci.
Change-Id: I577036660383e6bd9c015d6bbbcbc14bf8fb67ec
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only moving the header from drivers/console/uart_console.h to
include/drivers/console/uart_console.h so source file did not need to be
changed, only the defs.objs files to look into include/drivers/console.
Change-Id: I585e16b50d9ffecf01ca9225e80f0e101f62ee4c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename camelCase uartConsoleInit function for consistency with the
rest of the code in serial console.
Change-Id: I519737070538e9c0f52a8d110a3eff68e0185ce2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Following comments received during review rename console_uart_isr to
uart_console_isr for consistency reason.
Change-Id: Ibee1dec40ee19a9095f78969a07ffb73518fffbb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds a simple HCI UART (H4) driver that currently maps to
the second UART in the system. The main intention is to use this
together with qemu for accessing the Bluetooth controller available on
the host OS side.
The H4 HCI transport protocol is perhaps the simplest of the standard
HCI transports. It consists of a single byte in the beginning of each
packet which indicates the type of the packet: HCI event, HCI command,
ACL data, or SCO data (which we don't use at the moment).
Change-Id: I225a2a2361fbd7cd4ba82ea1f81ddc1271e9e7c2
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4e5c9419fe0ccbc4b2990b96fc95c697decc18e0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5e249e34ee9666666e31db6b9f71fe2abcc22400
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I2e501394b7fa4264d9854659e2dd008e5c94b540
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iebefec0e02cbb838564dd71fd4424c1adbff31f5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename UART_HOSTDRV_INTERRUPT_DRIVEN option to
UART_INTERRUPT_DRIVEN removing old definition.
Change-Id: Id48288db42e97a1ecbd809e259f33359d5a7c9d7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Serial console handler when registered allows to interact with serial
line. It can either execute callback from ISR or defer execution to
fiber or task. This will be used in Bluetooth development for tests and
simple interaction with Bluetooth stack.
Change-Id: Ia960b456a75062d614baea324608058d979aa11b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adding a line after variable declaration in order to comply with
the defined coding style.
Change-Id: Id41af88404bd37227bfd59a2d71ce08d0d6ce005
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
