While enabling specific I2C ports does indeed belong at the board
level Kconfig, the selection of driver (I2C_DW) is an SoC-level
choice, so it is moved accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Which UARTs are broken out from the SoC on a particular board is
board-specific; don't enable UARTs blindly in the SoC Kconfig.
Also, the default UART options are specified in the driver Kconfig, so
the same defaults specified in the SoC Kconfig are redundant. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Since Kconfig is responsible for enabling/disabling devices at build,
the devices in dt are defaulted to status="ok" to keep the output in
generated_dts_board.conf the same across configurations and simplify
the board-level dts files.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The UART references in dts_fixup.h are actually SoC-specific, not
board-specific, so they are moved. Since this leaves the board fixups
empty, the file is removed.
The SoC fixups are expanded to include the additional two ports that
are present on some revisions of the Apollo Lake.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add SPI support to the NXP TWR-KE18F development board. There are no
onboard SPI devices, but both SPI busses are available on the primary
Tower System elevator connector.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This enables the ROM bootloader on the CC13x2 / CC26x2 LaunchPad
development boards. The bootloader can be started by holding BTN-1
during reset. This can be useful during development to recover a board
if DAPs get disabled.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The HiFive1 and HiFive1 Rev B share the same clock initialization
code, so put it in soc/riscv32/riscv-privilege/sifive-freedom.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
The HiFive1 Rev B adds the following features to the
original HiFive1:
- A second UART peripheral 'uart_1'
- A hardware I2C peripheral 'i2c_0'
- Segger J-Link OB
- An ESP32-WROOM attached to the 'spi_1' peripheral bus
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
All three boards use a Skyworks SPDT switch to control whether the
antenna is connected to a PCB antenna or an external u.FL connector.
None of them power up in a state that properly enables an antenna.
Add startup code to configure for the PCB antenna.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/14123
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
[mike@foundries.io: adjusted code to use Zephyr GPIO APIs. boron is
now also based on DTS.]
Signed-off-by: Michael Scott <mike@foundries.io>
MCUboot needs nearly all 8 pages, on some commits even more. This leads
to a overwrite of parts of mcuboot code when an application is flashed.
By improving the size of the boot partition to 10 pages (from 8) and
decrease both application slots by 1 page, MCUboot fits in the boot
loader partition. This is also fixable by an extra .dts, but having an
out of the box working configuration is preferable.
Signed-off-by: Stefan Kraus <stefan.kraus@fau.de>
Documentation update to add instructions to download a
zephyr binary to the target from a Linux host
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Python scripts to download a zephyr binary image (zephyr.bin) to
Intel S1000 from a linux host.
The linux host's SPI master and GPIOs shall be connected to the
corresponding SPI slave and I/Os respectively.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
A YAML file to specify configuration of interface I/Os
such as the SPI device, GPIOs, etc.
The image download script configures the host's SPI and GPIO
interfaces accordingly.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Add partition table to support MCUBoot. A paragraph of
usage comments was also added in the board documentation.
Signed-off-by: Jun Li <jun.r.li@intel.com>
For native_posix, set NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME
by default when a host BT adapter is selected even if TEST
was also set. As using host peripherals one normally needs
also to run with the host time.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the generic pinmux APIs provided by zephyr to select
alternate functions.
This also contains a fix for a formatting issue in the
documentation for this board. Additionally, the serial
console is now on UART2.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
USB_DC_STM32 comes from Kconfig. We have to add the CONFIG_ prefix
to use USB_DC_STM32 in C code.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
OpenISA Vega board has Arduino headers which can be configured for
use with Arduino-compatible shields. To enable this in Zephyr,
let's define the gpio-map for Vega and set the appropriate
arduino_serial linkage.
Signed-off-by: Michael Scott <mike@foundries.io>
Create a dedicated connector file to hold arduino connector
information for disco_l475_iot board.
This should enhance board dts file readability.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adds a new argument to the jlink runner to reset the device after
loading code to flash. This fixes a problem with the lpcxpresso54114
board where it was necessary to manually reset the board to get new code
to start running after the 'ninja flash' command. This new argument is
optional and false by default because there are some cases were we must
not reset after load, such as when we load the application into ITCM on
imx rt devices.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the mcux lpi2c shim driver and pin muxes on the mimxrt1060_evk
board. Updates the board documentation and yaml supported list
accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Since there is no NFC antenna connector on the dongle and the pins
P0.09 and P0.10 that are dedicated to NFC functionality are in the
group of just a few ones available for external connections, it seems
more reasonable to configure these pins by default as regular GPIOs,
as users will most likely want to use them in this way.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
These definitions were left incorrect after a gpio-map change was
added to the PR introducing the boron support for the SARA-R4 modem.
Correct the gpio defintions here so that the boron build doesn't
break.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16289
Signed-off-by: Michael Scott <mike@foundries.io>
Enable pull-up on UART TX pin to reduce power consumption.
If the board is powered by battery the SoC consumes more
power than expected.
The consumption increases because TX pin is floating
(High-Impedance state of pin B from Dual-Supply Bus Transceiver).
Similar to commit b5b728495b
("boards: reel_board: enable pull-up on UART RX pin")
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
I2C support has been added back into the up_squared, leveraging the
new PCIe support in the DesignWare I2C driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The legacy PCI support in the DesignWare I2C driver is replaced with
the new PCIe support. The Intel Quark X1000 SoC and the galileo board
configurations are updated accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The SBL configuration no longer differs in any detail (except its name)
from the "standard" UpSquared configuration, so it is removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This needs to be pushed down to the SoC level, as it's an Apollo Lake
feature, not a feature of the UpSquared. Remove the Apollo Lake
references to the PCI devices because these will not be used when I2C
support is restored.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This option is no longer used in the dts_fixup.h file since there
are no SBL-specific fixups.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>