Some wires were crossed when an older PR was merged that
had build conflicts with newer code. Update this header
to reflect were the 'nested' member is in the kernel CPU
struct.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This operation is formally defined as rounding down a potential
stack pointer value to meet CPU and ABI requirments.
This was previously defined ad-hoc as STACK_ROUND_DOWN().
A new architecture constant ARCH_STACK_PTR_ALIGN is added.
Z_STACK_PTR_ALIGN() is defined in terms of it. This used to
be inconsistently specified as STACK_ALIGN or STACK_PTR_ALIGN;
in the latter case, STACK_ALIGN meant something else, typically
a required alignment for the base of a stack buffer.
STACK_ROUND_UP() only used in practice by Risc-V, delete
elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix documentation in kernel_arch_data.h and kernel_arch_func.h
headers for ARM, to indicate that these are common headers for
all ARM architecture variants.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The current context preservation implementation saves the spsr and
lr_irq registers, which contain the cpsr and pc register values of the
interrupted context, in the thread callee-saved block and this prevents
nesting of interrupts because these values are required to be part of
the exception stack frame to preserve the nested interrupt context.
This commit reworks the AArch32 non-Cortex-M context preservation
implementation to save the spsr and lr_irq registers in the exception
stack frame to allow preservation of the nested interrupt context as
well as the interrupted thread context.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Out-of-tree code can still be using the old file locations. Introduce
header shims to include the headers from the new correct location and
print a warning message.
These shims should be removed after two releases.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the `cortex_r` directory under the AArch32 to
`cortex_a_r`, in preparation for the AArch32 Cortex-A support.
The rationale for this renaming is that the Cortex-A and Cortex-R share
the same base design and the difference between them, other than the
MPU vs. MMU, is minimal.
Since most of the architecture port code and configurations will be
shared between the Cortex-A and Cortex-R architectures, it is
advantageous to have them together in the same directory.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We add the mechanism to generate offset #defines for
thread stack info start, to be used directly in ASM.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce a macro to define the IRQ priority level for
PendsV, and use it in arch/arm/include/aarch32/exc.h
to set the PendSV IRQ level. The commit does not change
the behavior of PendSV interrupt.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds some documentation for the exception
priority scheme for 32-bit ARM architecture variants.
In addition we document that SVCall priority level for
ARMv6-M is implicitly set to highest (by leaving it as
default).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit fixes incorrect Cortex-R interrupt lock, unlock and state
check function implementations.
The issues can be summarised as follows:
1. The current implementation of 'z_arch_irq_lock' returns the value
of CPSR as the IRQ key and, since CPSR contains many other state
bits, this caused 'z_arch_irq_unlocked' to return false even when
IRQ is unlocked. This problem is fixed by isolating only the I-bit
of CPSR and returning this value as the IRQ key, such that it
returns a non-zero value when interrupt is disabled.
2. The current implementation of 'z_arch_irq_unlock' directly updates
the value of CPSR control field with the IRQ key and this can cause
other state bits in CPSR to be corrupted. This problem is fixed by
conditionally enabling interrupt using CPSIE instruction when the
value of IRQ key is a zero.
3. The current implementation of 'z_arch_is_in_isr' checks the value
of CPSR MODE field and returns true if its value is IRQ or FIQ.
While this does not normally cause an issue, the function can return
false when IRQ offloading is used because the offload function
executes in SVC mode. This problem is fixed by adding check for SVC
mode.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Introduce the basic ARM64 architecture support.
A new CONFIG_ARM64 symbol is introduced for the new architecture and new
cmake / Kconfig files are added to switch between ARM and ARM64.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Out-of-tree code can still be using the old file locations. Introduce
header shims to include the headers from the new correct location and
print a warning message.
Add also a new Kconfig symbol to suppress such warning.
The shim will go away after two releases, so make sure to adapt your
application for the new locations.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We add an ARM internal API which allows the kernel to
infer the execution mode we are going to return after
the current exception.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We re-implement the z_arch_is_in_isr function
so it aligns with the implementation for other
ARCHEs, i.e. returning false whenever any IRQ
or system exception is active.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Duplicate definitions elsewhere have been removed.
A couple functions which are defined by the arch interface
to be non-inline, but were implemented inline by native_posix
and intel64, have been moved to non-inline.
Some missing conditional compilation for z_arch_irq_offload()
has been fixed, as this is an optional feature.
Some massaging of native_posix headers to get everything
in the right scope.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
include/sys/arch_inlines.h will contain all architecture APIs
that are used by public inline functions and macros,
with implementations deriving from include/arch/cpu.h.
kernel/include/arch_interface.h will contain everything
else, with implementations deriving from
arch/*/include/kernel_arch_func.h.
Instances of duplicate documentation for these APIs have been
removed; implementation details have been left in place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There's no compelling reason why this should be inline unlike all
other arches, it's a large function, called exactly once.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_set_thread_return_value is part of the core kernel -> arch
interface and has been renamed to z_arch_thread_return_value_set.
z_set_thread_return_value_with_data renamed to
z_thread_return_value_set_with_data for consistency.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
The GNU ARM Embedded "8-2019-q3-update" toolchain
erroneously uses "typeof" instead of "__typeof__".
To work around this we define typeof to be able to
support it.
This reverts commit 01a71eae3d.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
In arch.h the extern "C" in the including context is left active during
include of target-specific mpu headers to avoid more complex
restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit enables the option to route the BusFault,
HardFault, and NMI exceptions in Secure state, when
building for Cortex-M CPUs with ARM_SECURE_FIRMWARE=y.
This allows the various test to utilize BusFault,
HardFault and NMI exceptions during testing.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is now called z_arch_esf_t, conforming to our naming
convention.
This needs to remain a typedef due to how our offset generation
header mechanism works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Qemu is already updated past 2.9 release, so this
workaround for QEMU_CORTEX_M3 is now obsolete and
can be removed.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
move misc/dlist.h to sys/dlist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change removes tracing hooks before threads are initialized
and thread switched out hook for ARM before first time switching
to main thread.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT is taken into
account when allocating the area for the interrupt stack
using the K_THREAD_STACK_DEFINE macro. Therefore, we can
simplify how the top of the stack is derived during the
initialization of the system, by removing one more
occurrence of CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For architectures with custom swap to main, currently:
- arm
- posix
we are now using K_THREAD_STACK_SIZEOF macro to pass the
main thread stack size to z_arch_switch_to_main_thread().
This does not introduce any behavioral changes for posix;
the K_THREAD_STACK_SIZEOF() simply returns the sizeof()
the stack object. For Arm, this allows us to clean-up one
more occurence of CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT
in kernel_arch_func.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Only a single bit of the 4-byte internal (thread.arch) status
variable 'mode' is currently used, when we build with User mode
support (CONFIG_USERSPACE=y). In this commit we extend the usage
of 'mode' variable, adding an additional bit-flag to track the
status of the floating point context in a particular thread,
i.e. to track whether FP context is active or not. The status
bit is meant to be used in context-switch, to restore the FP
register context when required.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In FP Sharing mode we enable both automatic and lazy state
preservation of the FP context. This configuration improves
interrupt latency. Under this configuration the FP registers
will only be stacked when the thread is swapped out during
context-switch. Before jumping to main() we clear the FPCA
flag of the CONTROL register, so the FP context can be used
by the main thread.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The typeof definitions in tz.h and cmse.h are not required
any more, as the ARM GCC toolchain intrinsics have been
modified to use __typeof__ directly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In kernel_arch_init() we initialize the ARM core (interrupt
setup, fault init, etc.) so we can also move z_clearfaults()
in the same function and skip invoking it in the SoC init
functions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
