v24_signal in MSC response should be the copy of it received
in the command.
Change-Id: I9723ba182bf5911025c7a57220cd70687ca785f3
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This implemnts the feature to handle the unsolicited response
received from the AG. In the hfp_hf.c file the unsolicited_cb function
process it.
Change-Id: I3ca6c8d4a1522d02f7160e2fe4ae1598cd93ce7e
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Make NET_MAX_6LO_CONTEXTS depends on NET_6LO_CONTEXT, otherwise at the
moment even deselecting 6lowpan leaves NET_MAX_6LO_CONTEXTS set.
Change-Id: Iaa34d324005817be05190e203f6899ab89f89e5d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Making NET_IPV6_DAD depends on NET_IPV6_ND instead of default fixes
issue when deselecting NET_IPV6_ND, NET_IPV6_DAD is still selected in
this case.
Change-Id: I633b1a71fb5fdcd7ecc75be80a737d8bda142b2e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
NET_IPV6_ND is always selected by NET_ROUTE which is always selected
for NET_IPV6.
Change-Id: I316838033cccd205b24add6626521bbab5a68715
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This permits to catch issues without the need to enable debug level.
Change-Id: Ic3c66a84be587e955d532cc321161a3ae7b5d69d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The cause for this change is TCP. Until now, the radio strategy driver
(ALOHA or CSMA) was providing the actual nbuf, and not the buffer
fragment, counting on the fact that the loop was using
net_buf_frag_del() which made so, iteration after iteration, buffer
framgent to be always buf->frags. The problem with this logic is loosing
the fragments that might be still referenced by TCP, in case the whole
buffer did not make it so TCP can retry later and so on.
Instead, TX now takes the nbuf and the actual frag to send. It could
have been working with just a pointer on the data, and the whole length
of the frame. But it has been avoided due to possible future devices,
that will be smarter and run CSMA directly in the hw, thus it will
require to access the whole buffer list through the nbuf.
Change-Id: I8d77b1e13b648c0ec3645cb2d55d1910d00381ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The option is no longer used so it can be removed.
Use CONFIG_NET_IPV6_ND option instead.
Change-Id: Ibaa3d3deb52b8b176e85f8b9e1d8c80c1026aea1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Let's use the generic console input type now. This will be useful for
other console input drivers such as telnet.
Change-Id: I787a1e9d86481d5f8c4803453726d9042a89dea4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ll addresses need to be set properly before sending as the stack is not
checking if they are NULL.
Change-Id: Ia4e96240f18b53b0e32e21649a8b571c94260731
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If src and dst link layer addresses are not then 6lo fails
to compress the packet.
Change-Id: Ie2692def49f8a101194e3669dbaec00b557e14ce
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No need to set the status to -ETIMEDOUT in connect callback
if user did not want to have a timeout when doing a TCP connect.
Change-Id: I6d6e565a8d12bcefbcd9de751e789b5e43aad244
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A connection refused needs to be exposed to the user, otherwise the
connection will be stuck as a zombie forever.
This patch also adds a ENOTCONN check in net_context_recv() to match
the one that was already there in net_context_send().
Change-Id: I4f9ae46dd849f68ed97976add7da5daf1932cf55
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The net_context_connect() callback was being invoked synchronously
with the transmission of the SYN packet. That's not very useful, as
it doesn't tell the user anything they can't already figure out from
the return code. Move it to the receipt of the SYNACK instead, so the
app can know that it's time to start transmitting. This matches the
Unix semantics more closely, where connect(2) is a blocking call that
wakes up only when the connection is live.
Change-Id: I11e3cca8572d51bee215274e82667e0917587a0f
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
With CONFIG_NET_DEBUG_L2_BLUETOOTH is disabled the code generate the
following warning:
subsys/net/ip/l2/bluetooth.c: In function 'eir_found':
subsys/net/ip/l2/bluetooth.c:301:16: warning: unused variable 'addr' [-Wunused-variable]
bt_addr_le_t *addr = user_data;
^
Change-Id: I1a1ca20c4f2e4fa8aa2a551d2fffa1f86874760e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When checking if the L2CAP channel is connected it is not enough to check
if the conn member is set since the connection may still be pending.
Change-Id: I93a2328943b0ca0e42cdb5c525b30c7cdddd1c18
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use printk(), snprintk() instead of printf() and snprintf().
CONFIG_STDOUT_CONSOLE is anyway disabled by default so printf()
will not output anything without it.
Change-Id: I9ad778e318fe999e79ec34182f2de8574e45b7d4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Older default value of 2 is too small for even simple uses, for
example enabling just CONFIG_NETWORKING, CONFIG_NET_IPV4,
CONFIG_NET_SLIP_TAP makes a Zephyr application hang on start up
(apparently, waiting to allocate more buffers). While value of 3
is enough to cover the above options, set new default to 4 to
accommodate configurations with IPv4/IPv6/UDP/TCP enabled.
While the new default slightly increases RAM footprint, it's
apparently better for users who are short of it to optimize it
explicitly, rather than potentially make every Zephyr beginner
wonder why enabling networking breaks applications in non-obvious
way.
Change-Id: I76e83517f0d914ce616a930c3c48ee5c52567b88
Jira: ZEP-1619
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The K_<thread option> flags/options avaialble to users were hidden in
the kernel private header files: move them to include/kernel.h to
publicize them.
Also, to avoid any future confusion, rename the k_thread.execution_flags
field to user_options.
Change-Id: I65a6fd5e9e78d4ccf783f3304b607a1e6956aeac
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Convert driver to use the CMSIS NVIC APIs rather than the internal
ones so we can remove them in the future.
Change-Id: Ib9fe696e8d5e55f60865d3fd958a035135ce517a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
TCP states are swaped between "server" context and the new connection
context. But in any case the "server" context should loose the
information that makes it able to accept other new connections.
The swap was badly made, as the "server" context was loosing the
accept_cb (!) and the user data pointer. Instead the new connection
context was unrelevantly inheriting those.
Change-Id: Icc877449e1d4c4e59553dcbfd41718c5006edca0
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is useful that the user API can know whether the connection
was established properly or not. So this commit adds status
parameter to connect callback in net_context API.
The call to connect callback needs to be set properly in TCP
code. This commit does not fix the connect callback call which
is not properly done right now in net_context.c.
Change-Id: I284a60ddd658ceef9e65022e96591f467a936a09
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Wrong pool pointer was used when printing pool information during
the unref in nbuf.c. During nbuf init, wrong pool pointer was used
when printing memory pool sizes.
Change-Id: I9ed08cf7afa3c841c97ea981b97fff37aa40a984
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the parameter "timeout" is set in net_context_connect(), the
assumption by the user is that the function would wait for SYNACK
to be received before returning to the caller.
Currently this is not the case. The timeout parameter is handed
off to net_l2_offload_ip_connect() if CONFIG_NET_L2_OFFLOAD_IP is
defined but never handled in a normal call.
To implement the timeout, let's use a semaphore to wait for
tcp_synack_received() to get a SYNACK before returning from
net_context_connect().
Change-Id: I7565550ed5545e6410b2d99c429367c1fb539970
Signed-off-by: Michael Scott <michael.scott@linaro.org>
net_context is used for more than just TCP contexts. However,
the accept_cb field is only used for TCP. Let's move it from
the generic net_context structure to the TCP specific net_tcp
structure.
Change-Id: If923c7aba1355cf5f91c07a7e7e469d385c7c365
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When SYNACK is received we dont hand off the netbuf to anything
which will call net_nbuf_unref, so let's not mark it NET_OK.
Instead let the code path fall through to mark it NET_DROP.
Change-Id: I1f883e1a13c53c930bf50c07ff701e3db6f02d8a
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that the TCP_FIN block is after a potential packet_received()
tcp->send_ack should be appropriately set to the last sequence
processed.
In the case of a TCP_FIN buffer, we should advance it by 1 or else
the destination will continue to retry to send the last block.
Change-Id: I9c97d35a87ad6cc1a50f928b237780bff4cd2877
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Since we default to a return value of NET_DROP, we
can remove the automatic NET_DROP in the TCP_FIN block.
The return value will be set to NET_OK by packet_received()
if appropriate data is found which needs to be sent to
the callback.
Change-Id: Ib2634ba34440ca7053a4e98bf80f12cf6fbbd361
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Buffers marked TCP_FIN may still have data attached to them
which needs to be processed and handed back to the callback.
Let's move the TCP_FIN handling to after the data processing
section now that we have a copy of the TCP flags to do this.
Change-Id: I90f53b10e393024ebffebe1837b8866764b8a7ac
Signed-off-by: Michael Scott <michael.scott@linaro.org>
buffer TCP flags can be cleared during packet_received so let's
save a copy of them for later.
Change-Id: I401e99c1ed2723dac4e86da58635b548a5645c13
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Allow building the IP stack with newlib by enabling linux extensions.
Jira: ZEP-1592
Change-Id: I6714b73c7666a6f56c5203e2754ce1d7d94af0f1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CONFIG_STDOUT_CONSOLE is anyway disabled by default so printf() will not
output anything without it.
Change-Id: I8013e4efa5cb760215316e9413734281fb576f4d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In some situations, for example, when the remote side sends a RESET
message indicating that it is no longer interested in observing a
resource, it is helpful to have a way to obtain the obverser
representation.
Change-Id: Ifbf627f9170be844fd525c557dda8cb722ac7aff
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When retrieving options that represent an integer, the order of the
bytes being considered was inverted, resulting in invalid values being
returned.
Change-Id: I8ba84f77e3402066632c0ba650939266c87a8ea2
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
For example, when a RESET packet is passed to zoap_handle_request(),
there's nothing it can do, and it's not an error, so it returns
success silently.
Change-Id: I025bb44733521d6132999c219aaa292a3de302d7
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When parser encouter DHCPV4_OPTIONS_END, it immediately returns NET_OK.
No need to maintain end variable here.
Coverity-CID: 157584
Change-Id: I4c8b91f37ae882845c280dab1a8204966aaac00a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Pointer udp will be NULL when (!(CIPHC[0] & NET_6LO_IPHC_NH_1))
condition is true.
Coverity-CID: 157588
Change-Id: I8aa1eb2e4d4aee8039631d76ad0ecc345247d6b5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When contex information provided and DAC bit is not set and vice versa
are invalid cases.
Coverity-CID: 157569
Change-Id: I1b798703cbbb6155a7bdf734d0fcde9ce48c409c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In net_nbuf_get(), check that context pointer value is not
null before accessing data via it.
Coverity-CID: 157600
Change-Id: I7e7ea19a85f6fbef129e9ce699ea740d3be84cb8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If neighbor is not found, then ignore the timeout.
Coverity-CID: 157583
Change-Id: Ia2199970bd862e43901f5717025271c11c74af5e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
