Refactor the pdu_data_llctrl_phy_req_rsp struct into
pdu_data_llctrl_phy_req and pdu_data_llctrl_phy_req structs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the pdu_data_llctrl_length_req_rsp struct into
pdu_data_llctrl_length_req and pdu_data_llctrl_length_req
structs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements a minor refactoring of the implementation
for enabling the Radio on TIFS expiration. It inlines a function
that is defined in the local radio_nrf5_ppi header file.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes the implementation of the sw-switch for
tIFS in nRF5 Radio using the EVENT_TIMER instead of a dedicated
TIMER instance. A Kconfig configuration is added so the user can
select whether to use the EVENT_TIMER for the tIFS switch or use
a dedicated TIMER instance.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements minor refactoring of radio.c and ctrl.c,
to prepare for adding the implementation of sw-switch based on
the event timer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the option of conditionally reuse an existing
CC register of the event timer for timer sampling used in ISR
profiling, in case SW tIFS switching is implemented based on the
event timer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds a symbolic name for the event timer
CC offset that is used to sample the event timer during
ISR profiling.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor radio_nrf5* header files to group together
definitions and have less #if-#else-#endif.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is an accessor function for the MCUboot image header of an image
bank. The interface may seem a little cumbersome, but it is
future-proof against MCUboot feature and incompatible header version
changes.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Applications chainloaded by MCUboot may want to change their behavior
based on whether or not they are confirmed.
Here are some examples:
- performing a built-in self test (BIST) if the image is not yet
confirmed, and marking it OK if it passes (this enables reverting
to an older working image if the BIST fails, and allows future
resets to skip the BIST if it passes to improve boot time)
- interacting with persistent metadata related to image state on
other flash partitions during test upgrades (these are required in
cases when the update source provides runtime metadata, such as
monotonic counters, related to an upgrade attempt which must be
used to report results)
To enable these use cases, add boot_is_img_confirmed(), which reads
the "image OK" field for the current firmware image and returns true
if and only if it is set.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The current implementation of boot_write_img_confirmed() does not
write the image OK byte in flash bank 0 if the magic "request upgrade"
bytes in that bank are "good". This is not robust behavior.
The MCUboot design document has this to say about the image OK byte:
Upgrading an old image with a new one by swapping can be a two-step
process. In this process, mcuboot performs a "test" swap of image
data in flash and boots the new image. The new image can then
update the contents of flash at runtime to mark itself "OK", and
mcuboot will then still choose to run it during the next boot.
[...]
4. Image OK: A single byte indicating whether the image in this
slot has been confirmed as good by the user (0x01=confirmed;
0xff=not confirmed).
This says nothing about the magic bytes, so it'd be better not to make
assumptions about their effect here.
Further, MCUboot itself does not use the magic field when marking the
only known-good image on flash "OK" after either reverting a failed
upgrade or refusing to boot an upgrade iamge with an invalid
signature: instead, it unconditionally ensures the Image OK byte is
set to 0x01.
For consistency with MCUboot's design and implementation, remove the
lines that look at the magic bytes from boot_write_img_confirmed().
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Until now the OOB info and URI fields in unprovisioned beacons were
generally ignored by the implementation. Add fields for these to
bt_mesh_prov and make sure to take them into account when encoding
advertising data, both for PB-ADV and PB-GATT. For PB-ADV the URI goes
out in a separate beacon, whereas for PB-GATT it is placed in the scan
response data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Currently, we always set the content-format as "plain/text" when
it is unrecognized. This is wrong for it's possible that payload
is actually something else.
For example, we don't support JSON as incoming format right now.
But if I send a PUT request to /1/0/1 (server objectinstance/lifetime
resource) with value 3200 in JSON format: {"e":[{"n":"","v":3200}]}.
The client will still handle the request and respond with changed (2.04)
except the lifetime resource is updated incorrectly due to parsing
error.
Correct the behavior by not setting a default format and respond with
content-format-not-support error code (4.15)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Added noprompt command to shell. It will disable printing
the prompt.
For the native port, when feeding commands from a file or
pipe the prompt reprinting after each command (without echoing)
just confuses the user.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Now the native console driver also handles stdin
so we can drive the shell from the command line,
a pipe or a file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
net_pkt_append() has been changed. If payload reached max value
of 'data_len' in net packet, net_pkt_append will not append.
So the caller has to create new packet and append remaining payload.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Unlinking of neighbor also needed after nbr_unref. Otherwise
neighbor id is still in use and can not be linked further.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a node receives DIO message from peer then node adds peer as
a neighbor (nbr with linklayer address). But when a node receives
DAO message from different peer (chances are peer selected
different route to reach this node), remove peer with previous
link layer address and add as a neighbor with new link layer address
with new route information. Now node can properly route packets to
peer from neighbor table or based on nexthop information from
routing table.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a node joins in DAG network, it chooses neighbor (node or border
router) as its parent. But if it receives DIO message from another
peer, it can only act as a neighbor, not as a parent. If peer rank
is better than current preferred parent rank then node will select
new peer as it's best parent.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RPL prints lot of debug information which is difficult to track.
Minimized debugs in timer specific information and parsing of
DIO and DAO options. Also fixed alignment issues (no changes in
functionality)
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Do not even consider the push event if CONFIG_NET_MGMT_EVENT_INFO
enabled and info length is more than NET_EVENT_INFO_MAX_SIZE.
Print error message and ignore the event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current default value for NET_RPL_INIT_LINK_METRIC is 2, changing it
to 1.
e.g. NET_RPL_MIN_HOP_RANK_INC is 256 and NET_RPL_MC_ETX_DIVISOR is 256.
Rank calculation for nodes is
rank_increase = CONFIG_NET_RPL_INIT_LINK_METRIC *
NET_RPL_MC_ETX_DIVISOR;
Which gives 768 for first set of child nodes. It would be good if
CONFIG_NET_RPL_INIT_LINK_METRIC value is 1 and nodes ranks will be
245, 512, 768 based on the path they choose.
User can absolutely change their configuration to maintain proper ranks.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When CONFIG_NET_RPL enabled, do not run DAD (duplicate address
detection) for global addresses. In RPL mesh network global addresses
for nodes are determined by prefix from Border Router. DAD is not
necessary in this case.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CONFIG_NET_MGMT_EVENT_INFO is enabled then provide mgmt info
about the route, which is added or deleted.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CONFIG_NET_MGMT_EVENT_INFO is enabled then provide mgmt info
about the neighbor, which is added or deleted.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Remove any routes with neighbor as a nexthop first and then remove
neighbor from neighbor table.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Provided separate event information structs based on events. This way
user will know what kind of information will be received to that
particular event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_ipv6_prepare_for_send() needs to route packets, it missed
updating of RPL header.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Doing neighbor discovery in RPL network is not necessary and
that can be disabled in RPL nodes. Unfortunately the border
router needs to have ND enabled as it has also non-RPL network
interfaces in use. So in this case, mark RPL node as always
reachable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As this is very specialized info which is not normally needed,
do not print it by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introduce CONFIG_NET_ROUTING option that allows the IP stack
to route IPv6 packets between multiple network interfaces.
No support for IPv4 routing is implemented by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removes variable shadowing another declared
previously but does not change anything
functionally.
Signed-off-by: Juan Manuel Torres Palma <j.m.torrespalma@gmail.com>
Fix HCI LE Set PHY command for invalid behavior testing for
invalid parameters and unsupported features.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix generation of redundant length update event when no
change in effective octets or time.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/MAS/BV-73-C [Master Data Length Update - Responding
to Data Length Update Procedure; LE 1M PHY]
LL/CON/MAS/BV-74-C [Master Data Length Update - Initiating
Data Length Update Procedure; LE 1M PHY]
LL/CON/MAS/BV-76-C [Master Data Length Update - Responding
to Data Length Update Procedure; LE 2M PHY]
LL/CON/MAS/BV-77-C [Master Data Length Update - Initiating
Data Length Update Procedure; LE 2M PHY]
LL/CON/SLA/BV-77-C [Slave Data Length Update - Responding
to Data Length Update Procedure; LE 1M PHY]
LL/CON/SLA/BV-78-C [Slave Data Length Update - Initiating
Data Length Update Procedure; LE 1M PHY]
LL/CON/SLA/BV-80-C [Slave Data Length Update - Responding
to Data Length Update Procedure; LE 2M PHY]
LL/CON/SLA/BV-81-C [Slave Data Length Update - Initiating
Data Length Update Procedure; LE 2M PHY]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed implementation to use Connection Parameter Request
Procedure Preferred Periodicity value in calculating the new
connection interval used by the master role in Connection
Update Indication.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/MAS/BV-32-C [Accepting Connection Parameter Request –
Preferred_Periodicity]
LL/CON/MAS/BV-33-C [Accepting Connection Parameter Request –
Preferred_Periodicity and preferred anchor points]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
prepare_segment() returned NULL in case of any error, which then
net_context_send() translated into -EINVAL. That's highly confusing
though, because a common case of failure for prepare_segment() is
being unable to allocate data fragment(s) (for TCP header, etc.)
So, return output pkt by reference, and detailed error status as
a return value.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The vendor variants of the model publication client messages were not
passing onward the CID, rather passing CID_NVAL which is clearly not
right.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix controller implementation to restrict HCI LE Set Random
Address command when advertising and/or active scanning
and/or initiator state is enable.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/INI/BV-01-C [Connection Initiation]
LL/SEC/ADV/BV-01-C [Advertising With Static Address]
LL/SEC/SCN/BV-01-C [Random Address Scanning]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to support Connection Parameter Request
Procedure initiation with and without use of Feature
Exchange Procedure being performed in a connection.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/MAS/BV-81-C [Initiating Connection Parameter Request
- Unsupported Without Feature Exchange]
LL/CON/MAS/BV-82-C [Initiating Connection Parameter Request
- Unsupported With Feature Exchange]
LL/CON/SLA/BV-85-C [Initiating Connection Parameter Request
- Unsupported Without Feature Exchange]
LL/CON/SLA/BV-86-C [Initiating Connection Parameter Request
- Unsupported With Feature Exchange]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A few lines earlier the code bails out in case len is 0. Checking for
buf->len < 1 is the same as checking for buf->len == 0. Since len is
guaranteed to be > 0 here the check len > buf->len implicitly checks
for buf->len == 0, i.e. the second test can be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The timeout was hard-coded to 400ms, but the spec actually states:
"This timer shall be set to a minimum of 200 + 50 * TTL milliseconds."
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The caculation was wrong since the value may be BT_MESH_TTL_DEFAULT,
i.e. 0xff, leading to much too large values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Replay protection is not enforced at the Lower Transport Layer, so it
is possible to get an old replayed segment here. In such a case
cleanly discard it instead of causing a valid existing transaction
from being discarded.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The argument is a u32_t which limits the maximum disk size to 4 GiB.
Rather than fix this, delete the ioctl and switch the only use to
GET_SECTOR_COUNT instead.
Signed-off-by: Michael Hope <mlhx@google.com>
