During the CoAP API change, slight changes were made the ref / unref
packet pending process. Let's re-align with the coap-client sample
in how we apply the packet refs in retransmit_request() and also
replace the lwm2m_send_message() call with a direct call of
net_app_send_pkt(). This avoids a second processing of the pending
packets and keeps the ref/unref flow cleaner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
During the CoAP API change, the way packets were ref'd and then
unref'd in order to stop the packet sending functions from releasing
the net_pkts was changed and never updated in the LwM2M library.
Let's use coap_pending_cycle() and coap_pending_clear() to do the
ref/unref the same way as the coap-client samples in order to
match the pending process with the current CoAP APIs.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Fix controller implementation to only restrict HCI LE Set
Random Address command when advertising and/or active
scanning is enable.
Continues to pass the following LL.TS.5.0.2 conformance
test:
LL/SEC/SCN/BV-01-C [Random Address Scanning]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fraction could be stored with negative value.
The implementation was only considering the positive value case.
Therefore, we have to modify the code to take care of the case.
To test it
======================================================================
1. launch eclipse/wakaama lwm2m server
2. launch zephyr lwm2m client and wait for registration completed
3. Issue commands from server
* attr 0 /1/0/1 -0.1 0.1
* disc 0 /1/0
Current output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
105 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=0/00000,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Expected output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
102 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=-0.1,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Add OpenThread to Zephyrs net stack as data link layer.
OpenThread requires to call process function when an event occurs.
This process function is called from cooperative thread.
Packet conversion and dispaching is implemented in openthread.c
as well as addresses forwarding.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
OpenThread requires platform definition with standarized API
so we have to add wrappers to make it compatible with Zephyr.
OpenThread is based on autoconf, this requires
more specific CMakeLists.txt which allows to clone specific
commit or point to local copy of openthread.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
Fixed implementation to disallow setting Bluetooth device
address under active advertising or scanning states.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/INI/BV-01-C [Connection Initiation]
LL/SEC/ADV/BV-01-C [Advertising With Static Address]
LL/SEC/SCN/BV-01-C [Random Address Scanning]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditionally compiled changes to the NRF52 HAL so it can
run on simulated HW on the native port.
(HW models are not included in this commit)
All changes are under ifdefs and therefore will not have any
effect on normal builds
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Refactor mayfly based execution context solution out into
the HAL folder. This opens up the possibility to use
tasklets (if and when kernel gets the support) style
execution contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes a bug where in Connection Parameter Request was
initiated by slave role while Encryption Setup had been
started by the peer master.
Fixes: #5823
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This patch reworked logging so that the logging levels are more
finely graded and the locations with non-critical error handling
(below usb_ep_set_stall's) are logged with SYS_LOG_WRN.
Also cleanup, add log domain and fix indents.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
We want to move to use a common FLASH_DEV_NAME across the various flash
drivers. So samples, tests, or other code can be a bit more generic. So
replace CONFIG_SOC_FLASH_NRF5_DEV_NAME with FLASH_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename some legacy upstream and downstream interfaces in
radio_* namespace to ll_* namespace for consistency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor Kconfig and CMakelists.txt to be able to
conditionally compile in BT_LL_SW variant in the controller
subsystem. This is done to support future controller with
vendor specific variant implementations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add conditional compilation and move code to support
building a non-connectable Bluetooth shell application.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove redundant code that clears NRF_RADIO->EVENT_*
registers that are only used in PPI context. Only EVENT_*
registers that are read back need to be cleared.
Relates to: #5753
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements the SW-based radio switch for TIFS for LE
Coded PHY S2 in nRF52840 with a single PPI channel and a single
TIMER CC register.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the radio enable on-tick functionality in
function hal_radio_enable_on_tick_ppi_config_and_enable() in
radio_nrf5_ppi.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Help text for BT_CTLR_DEBUG_PINS incorrectly mentioned
specific GPIO pins being reserved for this feature, but in
reality the pins reserved vary on the SoC selected, hence
any specific mention of pin details is removed from help
text.
Fixes: #5499
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The meaning of this address type is the same as NET_ADDR_MANUAL,
but with a provision that DHCP can override such an address.
It's intended for the usecase when there's a default static
configuration for when DHCP is not available, but DHCP should
override it.
Before going to add another address type, there was an attempt
to repurpose TENTATIVE address state, but it doesn't work as
expected, as indeed, all existing address types/states already
have clearly semantics, and it makes sense to just another
address type to avoid confusion and unexpected behavior.
Fixes: #5696
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that static config is used unless/until DHCP values
arrive. This allows to have the same network configuration values
for both a case of direct board - workstation connection (where
DHCP is usually not available), and a case where both a board and
workstation connect to a router (which serves DHCP).
The changes in this commit however take care of netmask and gateway
settings, but not about IP address itself. This is addressed in the
next patch.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fix a missing !CONFIG_BT_CTLR_TIFS_HW conditional
compilation when nRF52840 is configured to use hardware
Trx switching, that caused compile error.
Fixes: #5779Fixes: #5761
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename tasks -> threads, task was the common name for threads before the
unified kernel was introduced.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This check is needed to not schedule the delayed work if current
message to be sent is the last heartbeat message.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The timer should be reset before sending to ensure correct
publication period.
This patch allows to pass MESH/NODE/CFG/HBP/BV-02-C.
This patch is ported from mynewt:
Commit: d4b84638df47e7ea21629e6919f547f5dcd47285
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Actually set Zephyr's default DNS server based on the corresponding
DHCP option received. This makes DHCP-based setup Zephyr complete:
now it's possible to connect Zephyr DHCP-enabled system to a typical
router, and it will fully auto-configure to access Internet.
This initial implementation uses just first DNS server address as
returned in DHCP message, it may need to be extended in the future
based on the need.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In some cases, we need to initialize DNS servers from a binary
addresses, e.g. in case of DHCP processing. With existing API,
such addresses would need to be converted to strings, just to
be converted back to struct sockaddr in dns_resolve_init().
This is not efficient, and with a number of addresses quite
cumbersome. So instead, allow to pass DNS server either as
strings, or as struct sockaddr's (or both).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit refactors the nRF5 radio driver of Bluetooth controller
to use symbolic names for PPIs. It also revisits the Radio hardware
timing constants to align with experimental measurements.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
