The CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD option can be used to wake up
the background log processing thread when a given number of messages
have been queued.
Currently, the msg_finalize() routine which is responsible for
queueing a log message for later handling appends messages to the
global list after performing the threshold check and waking up the
thread.
This leads to a race condition with undesirable behavior if the
threshold == 1:
- the msg_finalize() thread is scheduled out by calling k_wakeup()
- the log processing thread wakes up, notice that no messages are
queued, and goes back to sleep
- the msg_finalize() thread is scheduled back in and the message is
queued for processing
This defers the handling of the message until the processing thread
wakes up again after the CONFIG_LOG_PROCESS_THREAD_SLEEP_MS timeout,
which is not what the user wants.
Fix this by queueing the message before waking up the handler thread.
(This also may improve responsiveness for larger threshold values.)
Signed-off-by: Marti Bolivar <marti@foundries.io>
Symbols without prompt cannot be configured from application
configuration file.
warning: BT_CTLR_LE_ENC (defined at subsys/bluetooth/controller/
Kconfig:198) was assigned the value 'n' but got the value 'y'.
This symbol has no prompt, meaning assignments in configuration files
have no effect on it. It can only be set indirectly, via Kconfig
defaults (e.g. in a Kconfig.defconfig file) or through being 'select'ed
or 'imply'd (note: try to avoid Kconfig 'select's except for trivial
promptless "helper" symbols without dependencies, as it ignores
dependencies and forces symbols on).
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Reduces the logic as well as the ipv4 header checksum needs to be
computed either way.
Fixes#8720
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use modular arithmetic in statistics prints so that wraparounds are
automatically handled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to set the network interface into promiscuous mode
and then receive all the network packets that are received by
that interface.
Fixes#7595
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to set the network interface to promiscuous mode
and query the promisc mode status.
Note that currently this is only supported for ethernet bearer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The controller already has a minimum of 1, and the host should mirror
that (in particular to avoid Kconfig warnings). A single buffer is
unsafe in some scenarios (such as with LE SC enabled) however there
are valid scenarios where a single buffer makes sense, so leave it up
to the developer to choose this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_DNS_RESOLVER is the master switch for DNS resolution support,
for both native and socket APIs. Avoid confusing link errors by
compiling out both dns_resolve_name() and getaddrinfo() if that
option is not enabled.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Current implementation does not handle large extension headers
(e.g HBHO). Which resulted network stack crashes or due to
misinterpretation of lengths network packets are dropped. Also
caused issues while preparing IPv6 packet (e.g. large HBHO header
with IPv6 fragmentation support).
Issues fixed and provided more unit tests.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
name command can be used to read or write the GAP Device Name which is
used by the advertise command.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables the user to provide a ScanData, as long as it contain
names, and set BT_LE_ADV_OPT_USE_NAME.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces a new advertising flag BT_LE_ADV_OPT_USE_NAME which can
be used by applications to make the stack automatically include the
Bluetooth Device Name in the Scan Response.
The name is also updated in case there is already an advertising
instance using it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes GAP name writable if CONFIG_BT_DEVICE_NAME_STORAGE is > 0
which means the name can be persisted.
Fixes#8357
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses bt_dev to store the name and allow changing it at runtime, in
addtion to that if CONFIG_BT_SETTINGS is defined make the name
persistent.
Fixes#8357
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We might access NULL pointer if strchr() return value is not
checked properly.
Coverity-CID: 187073
Fixes#8993
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that it is clear that we are suppose to fall through
a case statement.
Coverity-CID: 187078
Fixes#8989
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we do not overflow when creating UScaledNS
value for interval.
Coverity-CID: 187079
Fixes#8988
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the severity level prefixes the same length. This helps both
readability of mixed level logs, and it's also consistent with how the
levels are named in the public API macros.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enabling internal processing thread allows implicit initialization
and processing log messages in case mutlithreading is enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The advantage to this approach allows drivers for
devices that already keep statistics data on hardware
registers to use those instead, rather than try to
replicate it the same counters again within the driver
itself.
The eth_native_posix.c driver though do not benefit
from this, is modified to use the new callback system.
Suggested-by: Jukka Rissanen <jukka.rissanen@intel.com>
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
If Neighbor Advertisement cannot be sent, then print info about it.
Earlier we printed info when NA succeeded.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fixes freeing net_buf without bt_conn_unref call.
As the result, the OTA was broken.
Fixes 8636
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
During transfer of object data via OMA TLV format, we can
encounter resources which are optional or not handled in base
LwM2M engine. When these resources cannot be handled let's
read past them and continue on.
Signed-off-by: Michael Scott <mike@foundries.io>
Don't use hard-coded value of 4 for passing the # of options to
coap_find_options() in handle_request(). This can easily get
out of sync.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M engine now supports optional resources that may need to be
setup or torn down in user-based code during object instance
creation / deletion.
Let's provide callbacks that can be used for this purpose.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's rename lwm2m_engine_exec_cb_t to lwm2m_engine_user_cb_t so that
future user-code callbacks can make use of the same definition.
Signed-off-by: Michael Scott <mike@foundries.io>
Initial implementation of poll() was more of a proof of concept, so
was coded with a single-thread application in mind. As we move to
sockets as the main networking API, make it possible to use poll()
from different threads.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A condition can be but on a prompt to make a symbol conditionally
user-assignable (visible).
Kconfig note:
'default's don't care whether the symbol is visible (has a prompt with a
satisfied condition) or not. 'if'/'depends on' just puts the same
condition on all the properties, disabling both the defaults and the
prompt at the same time. That might make it look like they're connected.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
implement a method that can set SN string descriptor at runtime.
but runtime SN and default SN configured in Kconfig must has the
same length.
Fixes: #6593
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Documenting new logger features: waking up processing thread
and internal logger processing thread.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When enabled, logger is creating own thread which processes buffered
logs. When no logs to process, thread sleeps for configurable period.
Thread can be waken up if number of buffered log messages exceeds
configured threshold. Logging sample aligned to use new feature.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added configurable threshold of number of buffered log messages
on which log wakes up thread which processes buffered logs. Thread
ID is provided during logger initialization. Feature is optional
and can be disabled by setting CONFIG_LOG_PROCESS_TRIGGER_THR to 0.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
