Callback was always called with NULL conn. Now it is called with proper
pointer or NULL conforming to description.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
As documented in bt_le_scan_update(), the host may start scanning
automatically for various reasons.
Until now scanning was only done on 1M PHY, making it impossible
to use auto-connect/sync establishment if the advertiser was using
Coded PHY as its primary PHY.
Auto-connection would never work. Sync establishment would work if
the scanner was started by the application.
This commit fixes this by instructing the controller to scan on
both 1M and Coded PHY if the controller supports Coded PHY.
The application may see increased power consumption as a result
of this change as the controller may now spend 2*scan_window
listening for advertising packets.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Use reschedule margin as minimum ticks_slot when ticker with
reschedule expires. This will ensure not too many unreserved
tickers expire in close proximity that can lead of pile up
of CPU processing time and eventually causing timeout
callbacks to be delayed. This mitigate possible LL asserts
due to overhead in start of radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable use of ticker slow window yield feature under mesh
usecase. This is make sure scan window either slides within
is window or skips to next interval so that it does not
lead to advertising event being skipped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix short prepare preempt timeout start, such that if there
are any normal prepare before a short prepare in the
pipeline, then find the short prepare and start its preempt
timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add prepare pipeline assertion checks to detect faults
like stopping preempt timeout without prior start. Also,
check if the preemptor param is correct when preemption
is performed. Check that the prepare pipeline is not
infinitely looping.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add assertion check for use of scan aux context so that
scan aux context is not assigned again while there is
already an existing LLL scheduling in use by the scan
context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_EARLY_ABORT_PREVIOUS_PREPARE to setup new
shorter preempt timeout irrespective of whether there
is a previous prepare enqueued in the prepare pipeline.
Relates to commit d573951f0d ("Bluetooth: Controller:
Revert back early abort of previous prepare").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit updates models metadata API to simplify the usage and
removes the metadata pointer in health server model context.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add USB out support for the BAP shell, so that decoded LC3
data can be sent to the host (e.g. a PC).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The volume controller always set the busy flag in
bt_vcp_vol_ctlr_set_vol, where it should only set it
if the GATT operation succeeds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Send a `READ_MAX_ADV_DATA_LEN` command to the controller at the
initialization of the host to fetch the maximum advertising data length
the host can accept.
This is done because even if the Zephyr controller provide the
`CONFIG_BT_CTLR_ADV_DATA_LEN_MAX` Kconfig symbol, other controllers may
not have such Kconfig symbol. So this is a way for the host to be more
controller-agnostic and provide useful feedback to the users.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
In most cases these were defined as 1. Saving one byte for the rest
doesn't really justify the added complexity that comes with these
options. Removing them also simplifies the interface between HCI
transports/drivers and the host stack, which in turn helps pave the way
for having HCI as a proper Zephyr driver API.
Fixes#71907
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Commit adds using host\controller based random number
generator instead of zephyr driver.
No mesh dependency anymore on zephyr system
random driver.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This function is used in many places, but just by reading its
name it is not obvious why it is needed.
By adding some documentation it will hopefully become a bit more
clear that this function is mainly used for auto connection
establishment.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This line was clearly intended to check for the value returned by
ad_init(). The ad_len is unsigned, so checking for a negative value
showed up in a recent Coverity run (no GitHub issue for it yet).
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Update the documentation of `BT_CTLR_ADV_DATA_CHAIN` Kconfig symbol to
say that it's only supported in *non-connectable* extended advertising.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
We can (and do) open multiple channels with a single L2CAP command. If the
remote doesn't support dynamic channels at all, then it sends back a
REJECT_RSP.
We only destroyed the first channel that matched the command PDU
identifier. Fix that and remove all channels that match.
Also add a test that verifies the patch.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Commit fixes bug if dfu server failed to deliver
apply response it gets stuck in applying phase.
In this phase it skips all further client attempts
to apply image again.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Ignore failure to Broadcast ISO remove data path when
terminating a BIG without a data path being setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple advertisers overlap over time, the random
delay being applied need many ticker operation context.
This causes the ticker_update interface to return error
causing assertion in the Controller.
This is fixed by not applying random_delay value to the
overlapping advertiser that does not get to use the radio.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor only. The surrounding ifdefs are intentionally not changed in
this patch. They will be in the near future.
Rename the pool and generalize the documentation to allow using this
pool for other events that fit the same criteria. This pool can be used
for any buffer that is processed synchronously, without negatively
affecting 'num complete' messages. E.g. 'cmd complete/status' can be put
in this pool already.
We will be working towards making the host process all event buffers
synchronously. This is because events have no dedicated flow control,
and discarding events in the driver without informing the host creates
problems. Discarding should instead happen in the host higher layers
when unavoidable.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
There was a typo in Kconfig check (missing CONFIG_ prefix) which
resulted in not setting OACP_FEAT_BIT_CRC bit in features.
This also resulted in checksum feature being disabled due to check
in bt_ots_init().
This was affecting OTS/SR/OASP/BV-03-C qualificatio test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
As per the BAP spec, the scan delegator device should add the BASS service
data in the extended advertising data when it requests a broadcast
assistant to scan for it. For testing purposes that's usually the case
with the shell, extended advertising data shall be populated with the
BASS service data.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
Add aux offset population assertion check, to ensure the
aux offset calculation is completed before the primary
PDU is setup for transmission.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Commit fixes behavior when provisioning protocol accepts
incoming transaction before ongoing tx transaction is
still active (device didn't receive acknowledgement yet).
Incoming data are ignored until ack is not received.
Specification:
5.3.3 Generic Provisioning behavior
...
If the sender receives a Transaction Acknowledgement
message, then the transaction has completed.
If the sender receives a message with other PDU types,
then the message shall be ignored.
...
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Change default to using advertising coding in ACL connection
when establishing connections on Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing check for Coded PHY support when creating
extended advertising set.
Added a fallback in Controller for upper layers requesting
Coded PHY while Controller is implemented without Coded PHY.
In this case, 1M PHY will be used in extended advertising
for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ignore LE 2M PHY being set in Initiating_PHYs of the
LE Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adapts flash writing for BLOB IO to RRAM. The previously used write
block alignment is not needed for RRAM.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
An audio stream is unidirectional, so it's always either
TXing or RXing, so the fields can safely be moved to an
enum.
The struct now has both a is_rx and is_tx field. The reason
why two bools are being used, is that the both of them may
be false (we need 3 states).
All access to the rx and tx structs in the union shall be
guarded by these fields.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
We could start executing the work item after the channel has been
disconnected or destroyed, due to a race condition.
Double-check we are connected before attempting to send data.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This check is repeated many times in `gatt.c`, with various comments.
This patch refactors these occurrences into a named function.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/41789
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
We can't just keep blocking the syswq, people be mad.
Override the timeout value so we always have K_NO_WAIT.
Also print a message to whomever's listening.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
