'buf' variable of type struct net_buf was one of the arguments for
finish callback in response to each AT command sent. 'buf' variable
not used in that function. So removed 'buf' variables from the argument
list.
Change-Id: I7d6aa6082f524012ae13a04426915076130ddf69
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Subscribe value is set to zero before calling notify callback,
to distinguish a subscription failure from an unsubscription
on disconnection (when flag BT_GATT_SUBSCRIBE_FLAG_VOLATILE is set).
Change-Id: Ia91220492d82041b2c385bf88a15180387e7a483
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
If found error during service level connection disconnect rfcomm.
Change-Id: Ida425375975b8d60ab1024d07a8ffe7745ae0b54
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Some application protocol required non-persistente subscription
across connection even in bonded case.
Flag BT_GATT_SUBSCRIBE_FLAG_VOLATILE specify if subscription
must be remove during disonnection.
Change-Id: I1bc2bbbb4bc86f58905e44a7eb267ca0871f2fdb
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
The subscriptions callback may free or reuse the subscription so all
instances that where this could happen need to safely fetch the next
element which is why this changes switch to use sys_list_t as it has
SYS_SLIST_FOR_EACH_NODE_SAFE.
Change-Id: I37d51f27116ea0c057b560924a9416676477597b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Once the service level connection is done call the connected
callback.
Change-Id: I7541e221d4c03c939682ec70f1d9c093f87ceb09
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
We can go further with taking advantage of k_poll and merge the
connection TX thread together with the HCI command thread, thereby
saving even more memory.
Change-Id: I1792056fd4621d62c7cd05929094033acca45c74
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that the k_poll API is available we can use it to have single
connection TX thread instead of multiple ones, which helps reduce the
per-connection memory overhead by a substantial amount.
Change-Id: Icb5d4da87cf0d660bba8da43186d1e76f41c825a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Removing the module specific buffer pool. If future, use common acl_tx_pool.
Change-Id: Ie1452f981ef43642715be395315845cc2d9bb285
Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
Detaching the timeout from the tx_thread lets us prepare for merging
all TX threads into a single one with the help of k_poll(). There's no
need to define a new delayed work object since the existing connection
parameter update object and connection timeout will never need to run
in parallel. Additionally, but some CONFIG_BLUETOOTH_CENTRAL guards to
void pulling in unnecessary code when Central role is not enabled.
Change-Id: Ia1f222aa052edcecd484a924f2d9a63a3b8fd11f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reduce the pressure on the common RX buffer pool by reusing HCI
command buffers also for the Command Status or Command Complete
response to them. This also implies removing the existing Kconfig
variable for the command buffer sizes since the size is also dependent
on maximum Command Complete event sizes. Instead, reuse the RX buffer
size also for HCI Command buffers.
Change-Id: I006b287d64a0c9ca40de741aa9a424a49a927385
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With an upcoming patch the HCI command buffers will be reused for the
Command Complete/Status HCI events. The controller HCI code needs some
refactoring to postpone the event buffer allocation so that the
parsing state of the HCI command buffer isn't touched.
Change-Id: I1f614fb9f02ed1886ca84198fbc8c64abc29e44f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The C pre-processor doesn't allow using sizeof() in comparisons such
as "#if FOO < sizeof(bar)". To make it possible to use such
comparisons where the sizes of headers are involved, introduce helper
macros for the headers instead of always having to hard-code magic
numbers into the code.
Change-Id: Iaf654cb4aaa49e83360901f5b01225ba4b952854
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the driver send() fails we need to free up bt_dev.sent_cmd.
Change-Id: I41b6293dfe09f1d94d7f85663ddbebed40cf6e90
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds API to allow user get SupportedFeatures attribute ID.
Jira: ZEP-1112
Change-Id: I91a1bf548d99c5c7cc75682aed19e89390350533
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds API to get available specific information included in protocols UUID
tree during parsing Protocol Descriptor List attribute. Usually it's to
be remote Server Channel/PSM number operating on applicable protocol.
There're a few helper functions added to be able parse and retrieve such
information from raw record data.
Jira: ZEP-1112
Change-Id: I736a780b95ba54821d36e6011b739f5ff37cd64f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Both all-zeroes and all-ones addresses are invalid. Fix the check for
this so that we fall back to a static random identity address when
needed.
Change-Id: I17cf903e0f3ed321311d86d09bed19343c2c801a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will reduce memory consumption by 23 bytes per session.
Change-Id: I1831b59881eaefb68f93c30e298b8f97d63c7428
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Session idle timer should not be started in dlc destroy if
session is already disconnected (which can happen in scenarios
like acl disconnection where in dlc is detached from session and
destroy will be called from tx thread) otherwise timer function will
get invoked for a disconnected session.
This patch moves starting of idle timer from dlc destroy to
the point dlc disconnect is recieved from remote since idle
timer is to handle only that scenario.
Change-Id: I94501515a182ff0e2348ba4e2df63100f2f52209
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
The nRF5x come preprogrammed from manufacturing with either a public or
random static BLE address in the FICR register. Use the random static
one when present instead of generating one during Bluetooth
initialization.
Change-id: Ic733cb926e0414e56d6f8be65b033692e914b72a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The hci_raw version of bt_buf_get_rx was expecting an int for timeout.
Let us int32_t instead so we match both the hci_core version and the
type that net_buf_alloc expects.
This addresses a possible build issue if/when int32_t differs from our
default (ie, newlib).
Change-Id: I69374c48da8f2b96fa2bd418ff505fbaacda11f0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change BREDR_NAME to DEVICE_NAME so it can also be used as the LE
device name.
Change-Id: I9ef55d9dff098372d47d9d5754ad7a7163a65bc0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added structure definition for stream end points
and the a2dp stream.
Change-Id: I6d0cc08611f5179397bea6200eb9244d7c1cc8d6
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
Fixed channels don't really use channels state as they don't need
connection setup.
Change-Id: Ie8b1327db0269a45e9ccb6049f8dda87aa445fb5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds state callback handler to allocate memory to AVDTP on an incoming
connection. Also, abstracts searching of free session as a function call.
Change-Id: Idee6b7a0507b0b75c0007717e351ca12de0cb5be
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
This is mainly for backward compatibility with 1.0b devices and for
spec compliance. CFC is mandatory post 1.0b spec where in MSC FC
shall not be used.
FC bit in MSC is used to manage the flow control. If FC is 1 then
the device is unable to accept frames.
Implementation is done by reusing "tx_credit" as a binary semaphore
wherein it will be blocked if MSC is recieved with FC bit 1 and
unblocked if FC bit is 0. Once tx thread is scheduled then semaphore
should be always available until all the buf in queue is sent.
Change-Id: I91181668ec0f46ff0b02905dd97e4503fc1fa7a7
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
v24_signal in MSC response should be the copy of it received
in the command.
Change-Id: I9723ba182bf5911025c7a57220cd70687ca785f3
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This implemnts the feature to handle the unsolicited response
received from the AG. In the hfp_hf.c file the unsolicited_cb function
process it.
Change-Id: I3ca6c8d4a1522d02f7160e2fe4ae1598cd93ce7e
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Convert driver to use the CMSIS NVIC APIs rather than the internal
ones so we can remove them in the future.
Change-Id: Ib9fe696e8d5e55f60865d3fd958a035135ce517a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For combined builds with Controller+Host the Controller's HW RNG is
used instead of TinyCrypts PRNG.
Change-Id: I4dbe85e547c057cf57ae0934b10866f2bb9f610d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case the channel provides its own MTU and allocator it should be
able to store as much data as set in the MTU, based on that the code
can give enough credits to fill the entire channel MTU.
Change-Id: I291cf1bb643f200bde191914e814f681f4f65c3e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Added pointer to store the callback function
from the application in the Request structure.
Added userdata param, to be used to fill AVDTP resp.
Change-Id: I8f3289545fdbbd91e4ed7f9983f4f4331d9b59a6
Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
This makes l2cap_chan_add updates the state to CONNECT so it doesn't
have to be done manually for both incoming and outgoing code paths.
Change-Id: I7331e49c675c83c6c1b184eeecc49c75c446a1ff
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Try to use IS_ENABLED instead of #ifdefs whenever possible.
Change-Id: I330769204914286bb98583dd89a3d849d4fcc128
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Try to use IS_ENABLED instead of #ifdefs whenever possible.
Change-Id: I77d2e53f7aa7f2832513f235a63ad2cf14e73cb1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Try to use IS_ENABLED instead of #ifdefs whenever possible.
Change-Id: I78a3ccc6fcb84b431198f1a6c46aa6d50e9e9cd1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Try to use IS_ENABLED instead of #ifdefs whenever possible.
Change-Id: I4da93076a27a33b15a9b9119cfe5a1ff68acba0b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The new IS_ENABLED macro allows exposing conditionally enabled code
always to the compiler, even though it may not ultimately end up being
built. This is in particular useful for letting the compiler catch any
logging format string errors. Introduce a new BT_DBG_ENABLED macro
that c-files need to define before including <bluetooth/log.h> in
order to choose whether BT_DBG() logs are enabled or not.
When no Bluetooth logs are enabled the patch also modifies the log
macros to have the format strings checked with the help of the
__printf_like annotation and empty static inline functions.
Change-Id: Ie6bc8e10727b5b306f3ed0f94089a07a22583d9b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce a new callback to bt_conn_cb that allows the application to
decide whether the accept or reject an incoming connection parameter
request. If the request is accepted the callback allows the
application to also adjust the values to what it thinks are more
appropriate.
The Zephyr Bluetooth API allows multiple registered connection
callbacks, so in principle there may be multiple le_param_req()
callbacks. It's recommended for an app to just use one (for clarity),
but if there are multiple the app is responsible for managing
potentially different requirements. In the case of multiple callbacks
each callback will receive the modified parameters in case a previous
callback modified them.
Jira: ZEP-1474
Change-Id: I098db5791aac521f1edfa9fefdf847db0a27e3a5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BT_L2CAP_RX_MTU is counted starting with the BLUETOOTH_RX_BUF_LEN
variable, which doesn't include the BLUETOOTH_HCI_RECV_RESERVE
contribution (this would only be valid if we started subtracting from
BT_BUF_RX_SIZE).
Change-Id: I1ab3eaf8907946c56c2a9fe16b2074f3a3027a0f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
