Update one of the threads in the icmsg_me sample to use ipc_service
nocopy functions in both host and remote applications.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
This commit enables the initiator or the follower
role for the ICMSG multi-endpoint backend
depending on dts by default.
It is needed when BT_RPMSG transport for HCI is used.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Fixup ADC sample support for boards with LPADC present. This ADC only
supports an external reference voltage, which is a board-specific value.
Add reference voltage values for all supported boards.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This moves the UDP and Bluetooth initialisation for MCUmgr to be
performed automatically with the new hander registration feature.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This replaces the requirement for applications to manually
register MCUmgr handlers by having an iterable section which
then automatically registers the handlers at boot time.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add the ISO packing field when creating a unicast group.
This refactors the structure of the unicast group create,
as it now takes both the packing as a group parameter, as well
as an array of stream-specific parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
websocket_recv_msg() is reworked with using fsm. Now the function
return 0 when payload is empty, -ENOTCONN if socket close. Receiving
empty ping and sending empty pong were added in tests.
Fixes#52327
Signed-off-by: Grixa Yrev <grixayrev@yandex.ru>
This changes HAS registration to be dynamic and let's the
application set Hearing Aid Type and binaural features.
Often, devices are flashed with generic firmware with some
features stored post factory production, requiring
the settings to be moved from compile time to run-time.
This change will increase the RAM usage as the GATT
service is moved from ROM to RAM.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
Co-author: Soren Engquist <soren@engquist.dk>
Since logging with printk() was updated in commit c5a40e3,
the amg88xx sample dropped around 60 of the messages after
sampling. Increasing log buffer size will fix this issue.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
Move the check for the pa_interval to before we start
parsing the data for the name, as that is more optimized.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since 6c30c9ac47 (samples: net: zperf:
Rewrite upload part to use sockets), zperf uses SO_RCVTIMEO in UDP mode,
hence must depend on/enable support for it.
Without SO_RCVTIMEO support, zperf fails like this:
> nb_packets=47 delay=188964 adjust=-13
> setsockopt error (109)
> setsockopt error (109)
> -
> Upload completed!
> LAST PACKET NOT RECEIVED!!!
> Statistics: server (client)
> Duration: 0 us (10.19 s)
> Num packets: 0 (50)
> Num packets out order: 0
> Num packets lost: 0
> Jitter: 0 us
> Rate: 0 Kbps (9 Kbps)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The net_mgmt sample enables a lot of features, resulting in pretty large
image sizes for various platforms (~200k). At the same time, the
sample.yaml for the sample did not specify minimum flash requirement for
the sample, causing flash overflows during build in certain cases.
This commit fixes this by setting a reasonable flash requirement for the
sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allow enabling CDC ACM logging only if CDC ACM is not used as logging
backend. This prevents endless recursive logging loop, especially
visible when minimal footprint logging is enabled.
Fixes: #52981
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Verify that the peridic advertising interval is non-0 to
ensure that the remote device is actually advertising
with peridic advertising enabled.
This fixes an issue where per_interval_ms would be set to 0,
causing bt_le_per_adv_sync_create to fail to invalid values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There is already CONFIG_SETTINGS_FILE_PATH, which is set to full file path,
while CONFIG_SETTINGS_FILE_DIR is required to be set to its parent
directory. This is redundant, as parent directory path can be easily found
out either during runtime or optionally during buildtime by CMake.
CONFIG_SETTINGS_FILE_DIR was actually introduced recently after Zephyr 3.2
release as a replacement of deprecated CONFIG_SETTINGS_FS_DIR. This means,
that there is no need to deprecate it for 3.3 release and dropping it
should be fine. Adjust 3.3 release notes accordingly, so that
CONFIG_SETTINGS_FILE_PATH will be used directly.
This patch stops using deprecated CONFIG_SETTINGS_FS_DIR. There is actually
no value in respecting it, as setting anything other than parent directory
of CONFIG_SETTINGS_FS_FILE makes no sense.
There is actually one use of CONFIG_SETTINGS_FILE_DIR in file backend
tests, to derive directory for files containing tested settings.
CONFIG_SETTINGS_FILE_PATH is not used there, so it makes little sense to
derive directory name from it. Instead, just use hardcoded "/settings"
subdirectory, as this was the default value of CONFIG_SETTINGS_FILE_DIR.
Deriving parent directory can be done either in runtime or in
buildtime (e.g. using some helper CMake function). Doing it in runtime
however allows to create directory recursively (which this patch actually
implements), e.g. for some more nested FS tree structure. Additionally it
will simplify migration of settings configuration from Kconfig to
device-tree (yet to be developed feature).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Applying same fix as for watchdog relmated samples
in https://github.com/zephyrproject-rtos/zephyr/pull/52949/
Switching to the immediate logging mode, not by just disabling the
LOG_PRINTK option.Do not direct printk to logging subsystem in the sample.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Starting with commit b9b43a0eb772a464bba13833d11e3a31fbf4e09e, printk()
messages are handled by the logging subsystem. This can cause trouble
in watchdog related samples if the deferred logging mode is used (and
currently it is by default), because those samples are ended by a reset
and some messages may not get a chance to be outputted.
Since the same problem concerns also the ordinary logging messages that
may be produced during execution of the samples, this commit fixes it
by switching to the immediate logging mode, not by just disabling the
LOG_PRINTK option.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable the openamp sample for RT1160EVK. CM4 core has a custom DTS
overlay to use LPUART2 for console information, and use a secondary GPT
timer for the system tick.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable the openamp sample for RT1170EVK. CM4 core has a custom DTS
overlay to use LPUART2 for console information, and use a secondary GPT
timer for the system tick.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for setting the help description for each entry in a dictionary
command. Currently the syntax string alone may not provide sufficient
description of its entry. This commit also helps keep the help messages
consistent with existing style.
Signed-off-by: Xinyang Tan <xinyang.tan@delve.com>
Commit ff3aaa6ef3 moved some getopt
declarations to unistd.h. Update sample to include the header, so that
we can access optarg.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add deep sleep sample code with support for the
following wake-up sources:
- Timer
- EXT0/EXT1: IO under RTC domain
- GPIO (ESP32-C3 only)
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Added configuration which allows to test the sample using SPI_NOR
driver instead of NRF_QSPI driver.
SPI_NOR driver is generic, so nice to add possibility to check
how it is working.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Generates XML file containing VIF policies by reading the device tree
using EDT.pickle generated during build
This script writes a subset of general and sink-pdo VIF policies in
output file
This script gets invoked during build if enabled through kconfig
The generated XML containing USB-C VIF policies could be used by
USB PD/Type-C analysers/testers to understand USB-C properties and
perform tests accordingly
Signed-off-by: Madhurima Paruchuri <mparuchuri@google.com>
Add a sample program demonstrating the LED driver for Microchip's
XEC microcontrollers. The sample can be built for MEC152x and
MEC172x.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
This seems to have caused build failures in spite of CI being
green in PR 52653.
This reverts commit fc92eb1b37.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
log_backend_activate() does not assign the backend id (backend->ctx->id),
which is required for runtime filtering.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
