By default, qemu_coxtex_m3 target selected SLIP driver as
a network backend. This requires some unstandard tool (tunslip6),
which are error prone and might not necessary work.
Ethernet backend work equally well as in native_posix so
use the same for both.
Change the default emulation platform from X86 to Cortex-M3
because it supports Ethernet by default.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The sample application shows how to configure NXP S32 Network Controller
(NETC) for different use-cases.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Not all toolchains support newlib so tests that require newlib need
to have a filter to we don't try and build those tests on those
testcases. Some newer tests are missing:
filter: TOOLCHAIN_HAS_NEWLIB == 1
so add that to testcases that needed.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Set the packing field when creating the broadcast source. This
is currently missing, and in uninitialized.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Currently, the s32z270dc2_r52 board only supports running on RAM,
so samples or tests watchdogs that perform SoC reset will not produce
results. Set the build only for these samples and tests until the
reset SoC function is supported.
Signed-off-by: Quang Bui Trong <quang.buitrong@nxp.com>
Use the macro as defined by the
include/zephyr/dt-bindings/dma/stm32_dma.h to configure the
dma channel.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The current updatehub version forces user application to run in kernel
mode. This add necessary api syscalls to isolate userspace from kernel.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add an option to build the sample with application-layer clock sync
service running in the background.
This will also add a build-check for the clock sync service in CI.
Signed-off-by: Martin Jäger <martin@libre.solar>
Align pins that are required to be shorted for this sample on
nRF52840 DK with those used in e.g. uart driver tests.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Adding configuration options to bring old behaviour where
UART shell have been available when overlay-bt.conf has been
used for building sample.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
When the toolchain has picolibc support, run
samples/subsys/cpp/cpp_synchronization and tests/subsys/cpp/libcxx tests
using it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a polling sample for CPU temperature monitor.
This sample demonstrates how to data fetch and print to the console.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
sample.yaml was missing a tests section, making it unable to run with
twister. This patch adds the section.
While at that, fix an issue in the sample README.rst.
Fixes#53656.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
The sample documentation mentions that the sample can be built directly
on Linux, which was no longer the case. This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The old link has expired, the file is no longer avaiable to download.
Update the download link, which now leads to a file in Ubuntu
repositories for the recent LTS release, hopefully making the link valid
for longer period.
As the server ceritficate is signed by a different root CA, update the
root CA as well.
Finally, cleanup how the URL is handled in the sample - for TLS variant
it'll always be provided with a Kconfig, hence no need to repeat it in
the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It's often the case with TLS file servers, that the download link does
not lead to downloaded file, but rather redirects to another server.
Therefore it makes sense to have a minimal support in the sample for
HTTP redirection, so that the file can still be downloaded.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This fixes the application that was not waiting for QoS configuration of
all streams in the group. The QoS operation is done on group of streams,
while the status of each one of the streams is received separately.
Meaning that the application has to control which streams were already
configured before enabling them.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Allow the streams to be paired when creating unicast group. This will
allow to reuse the same ISO for the paired streams.
Fixes: #51796
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Update usage of zephyr_code_relocate to follow new API. The old method
of relocating a file was the following directive:
zephyr_code_relocate(file location)
The new API for zephyr_code_relocate uses the following directive:
zephyr_code_relocate(FILES file LOCATION location)
update in tree usage to follow this model. Also, update the NXP HAL SHA,
as NXP's HAL uses this macro as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update the Readme file of the large mtu sample because the orginal PR
(https://github.com/zephyrproject-rtos/zephyr/pull/53593) has been merged
before the last comment could be addressed.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add nrf5340_audio_dk_nrf5340_cpunet to the platform_allow
as having it only in integration_platforms causes issues
with the CI system.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the README to add more informations on MTUs. Also add a diagram of
the different MTU and Kconfig symbols in the Host.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add a new sample that demonstrate how to exchange MTU to allow larger
packet transmission.
The sample is split in two applications. One is the Central, it will
initiate the MTU exchange. The other one is the Peripheral and will try to
send a large notification. If the MTU exchange fail or the new size is not
big enough, the Peripheral will not be able to send the notification.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This sample uses the arduino_i2c and arduino_serial DT nodes, so it
should enable them explicitly, not assume they will be enabled by
default for a given board.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This application uses the uart1 DT node, so it should enable it,
not assume that it will be enabled by default for a given board.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit updates all deprecated `CONFIG_LIB_CPLUSPLUS` usages to:
* check if the Zephyr minimal C++ library is enabled using
`CONFIG_MINIMAL_LIBCPP` instead of relying on the
`CONFIG_LIB_CPLUSPLUS`-based inference.
* select `CONFIG_REQUIRES_FULL_LIBCPP` when there exists a component-
level C++ standard library dependency. This allows a component to
declare C++ standard library dependency without designating a
specific libray implementation.
* select the correct type of C++ standard library implementation to use
through one of the `CONFIG_LIBCPP_IMPLEMENTATION` choices.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates all in-tree code to use `CONFIG_CPP` instead of
`CONFIG_CPLUSPLUS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit moves the C++ samples under `samples/subsys/cpp` to
`samples/cpp` because the C++ language and standard library support is
not a "subsystem" (aka. API) in conventional sense and the samples
demonstrating them should belong directly under the top samples
directory as does POSIX support.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Convert the CANopenNode sample to use sysbuild for generating MCUboot +
CANopenNode sample binaries instead of using manual instructions.
Rework the twister sample filtering to just list the known good boards.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Currently MCUboot and system reset are invoked directly in the sample
applicatiion. This introduce 2 new methods to isolate system from
application.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The CP app sends PD a "command" and the PD responds to it. Some times,
the PD has something that it wants to tell the PD which it does so in
response to POLL command. Both CP and PD apps need a way to exchange
these info over the OSDP bus. To archive this we will introduce what are
called "events" that allow the PD app to enqueue and CP app to get
notified.
This is analogous to the incumbent "commands" abstraction where, the CP
app enqueues a command and the PD app gets notified of it.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Add CONFIG_USBC_CSM_SINK_ONLY=y to Sink's sample prj.conf.
This selects the Sink only Connection state machine
for the Sink sample and it explicitly show the user
of the Sink sample how the connection state machines are
selected.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Due to some previous time-related header issues, we included
`<sys/time.h>` without including `<time.h>`. The latter is
necessary for `time()` (specified by both ISO C and POSIX).
Fixes#53673
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Instead prefer to add the tag to ignored tags in the board yaml
where its clearer for both cavs25 and other cavs/ace boards what
to ignore even if duplicated.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Replaces the capitalized DMIC tag with dmic as tags in Zephyr are by
convention lower case.
Was unexpectedly building this sample for intel boards while ignoring
dmic (lower case tag).
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
