The sample illustrates a way of send all the channel event to the host
by using the UART, a user_data portion, and the claim/finish APIs.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The work_queue sample illustrates three reaction styles available for
using zbus. The first is a listener that reacts by callback; use it should
for urgent reaction. The second is a listener that responds by callback;
instead of executing the code, it pushes a job to a work queue that will
be executed shortly but not immediately. The last one is the subscriber
that reacts using a queue; use it for an asynchronous reaction where the
developer would like to control the flow.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The hello world sample illustrates a simple way of using zbus. There is
a listener and a subscriber interacting each other by using a read-only
and a regular channel. The APIs are called by using the function
and macro variation.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Many driver samples or tests only had 'drivers' as the tag, without a
tag indicating what driver that is exactly, so add some missing tags.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running a flash read command on the flash shell, the hexdump
prints came out incorrect. There was a space missing between the
ninth element and its preceding "|", and a redundant newline.
This commit fixes this issue.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
The RP2040 needs a DTS overlay for the PWM to work with the
blinky_pwm examples. This commit adds the required overlay.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
This commit adds support for compiling in support for several different
regions/frequencies and dynamically choosing which to use in run-time.
This commit introduces no API breakages - if a prj.conf contains only a
single region Kconfig, the new function lorawan_set_region() does not
need to be called.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
The most of the wwdg peripherals requires a reduced apb clock
to pass the sample.drivers.watchdog.stm32_wwdg testcase.
This apb1 prescaler is added to the overlay file
for that particular clock.
Specific overlay for the stm32h7 family because of the APB1
bus clock named d2ppre1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This add TFM cmake definitions to build mass storage sample for non
secure firmware boards versions. The stm32l562e_dk_ns board was used
to demonstrate. It uses SDMMC/SD with TFM profile large. Tests were
conducted using a 2GB transflash card with FAT-32 partition.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
This enables usb and usb_device tag for tests. It explicitly disable
samples/subsys/usb/dfu for non-secure version of this board due to
building errors, which can be explored in future.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
This sample demonstrates the usage of the MQTT-SN library over UDP.
It connects to a gateway, publishes to the topic "/uptime" and also
subscribes to "/number".
Signed-off-by: René Beckmann <rene.beckmann@grandcentrix.net>
Add a sample presenting ipc_service working with icmsg multi endpoint
backend. The sample creates multiple instances of icmsg, one of them
consisting of two endpoints.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
When read callbacks are used, it bypasses LwM2M engine data
handling and therefore LwM2M observation cannot work properly.
Read callbacks should be used only on special cases.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Updates the location of the shared memory buffer to account for
memory map chains with `mps2_an521_remote`.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Updates the location of the shared memory buffer to account for
memory map chains with `mps2_an521_remote`.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
It was found that the existing regex check was not enough to validate
correctness of execution of mass samples. Tests would pass even when
a filesystem failed to be mounted. An additional line to check is added
to validate the setup of a filesystem.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This removes some modules and functionality from the sample to
reduce the output application size to assist in fitting it to MCUs
with less flash storage space.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit fixes the overlay file for running the
samples/subsys/fs/littlefs on the nucleo_h743zi platform.
The storage_partition is moved to the qspi_nor flash
instead of the internal flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Currently, the sync timeout means the device will timeout
straight after it syncs. This means we cannot send a sync
transfer as we are no longer synced.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
C++ standard requires C++ main() to have the return type of 'int'.
This commit updates the CHRE sample to define main() as
`int main(void)` and enable `CONFIG_CPP_MAIN`, which instructs the
Zephyr kernel to call the C++ main().
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates the cpp_synchronization to run on the "POSIX
architecture" boards such as `native_posix`, since the POSIX arch now
properly supports the main() defined in a C++ source file.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates the cpp_synchronization sample to enable
`CONFIG_CPP_MAIN` since it defines its main() in a C++ source file.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Add ADC driver sample overlays + update features in doc + metadata for TI
CC13x2/CC26x2 based boards (cc1352r_sensortag, cc1352r1_launchxl,
cc26x2r1_launchxl).
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
A simple sample with some (explained) tricks to get code relocation for
Intel ADSP CAVS platforms.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Add library model configuration to tfm_secure_partition model.
IPC model is now the default, so add back the library configuration
for the sample as an additional configuration to the default.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the min_ram limit to 64kB so that with new ztest lib
can run the sample on board with enough ram.
Smaller ram platforms are not used anymore.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
So far running twister tests didn't fail even though the sample failed
to receive the initial attestation token data.
Therefore this adds the regex lines that the samples prints if the
IAT data were received.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Brackets were originally used in the sensor info shell command output to
make it obvious when a field is a null string, however they incorrectly
suggest that a field is an array. Remove the brackets and conditionally
print "(null)" instead.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Skip all CAN controller tests utilizing CAN loopback mode for the
kvaser,pcican CAN controller card as emulated in QEMU.
QEMU emulation of the SJA1000 CAN controller backend does not yet support
the SJA1000 Self Reception Request command which is required for proper
loopback operation.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Use printf() instead of printk() for printing sample output. According to
the documentation Zephyr printk() and friends are for printing kernel debug
messages.
With printf() instead of printk() the CAN counter sample passes twister
test execution on native_posix and native_posix_64.
Fixes: #50570
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Setting the extended advertiser as default advertiser
to improve both preformence and reliability.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Now that IPM drivers are enabled based on devicetree we can
remove any cases of them getting enabled by Kconfig, *defconfig*,
and *.conf files.
We need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The commit bfb1040612 has renamed the
sample blink_led to blinky_pwm, however, the project still have the
former name: blink_led.
This renames the project to its new name: blinky_pwm.
Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
Enables the new sensor info shell command in the sensor shell sample
application and documents its usage.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Updates the sensor shell sample documentation to reflect the currently
supported sensor shell commands. The list and list_channels commands
were removed in commit 95b4d37230 but the
documentation wasn't updated at the time.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The data field is a *pointer* to the buffer, not the actual buffer itself.
Instead of smashing past the end of the struct, write through that pointer.
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove all obsolete DISK_FLASH* Kconfig options.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add flash disk description to overlays. Specify custom flashdisk
partition for fat fs api test to match the Kconfig values, because
native posix storage partition is too small for FatFS filesystem.
Co-authored-by: Johann Fischer <johann.fischer@nordicsemi.no>
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Move runtime checks to use arch_num_cpus() and build checks
to use CONFIG_MP_MAX_NUM_CPUS. This is to allow runtime
determination of the number of CPUs in the future.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Move runtime checks to use arch_num_cpus() and build checks
to use CONFIG_MP_MAX_NUM_CPUS. This is to allow runtime
determination of the number of CPUs in the future.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Move runtime checks to use arch_num_cpus() and build checks
to use CONFIG_MP_MAX_NUM_CPUS. This is to allow runtime
determination of the number of CPUs in the future.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
