In the docs replace the references to native_posix with native_sim.
And switch the overlays and default test platform to native_sim
from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim
Enable native_sim in the tests, and replace native_posix as integration
platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim in
the documentation, and enable this tests by default in
native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for low power mode on the G1120B0MIPI using the RT595. This
configuration is tested via a testcase in samples/drivers/display, which
should validate that the display can be driven by the RT595 when
CONFIG_PM and CONFIG_PM_DEVICE are set.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds support for using a connected host to
broadcast audio via USB Audio.
Offload LC3 encoding to separate thread.
Signed-off-by: Lars Knudsen <LAKD@demant.com>
PR #63332 introduced a change to the LZ4 sample that set the malloc
arena to an unnecessarily large size.
After testing on native_posix, qemu_m3, and esp32s3_devkitm_appcpu, it
would appear 24K is a much more reasonable (and sufficient) size.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Let's replace the references to native_posix with native_sim,
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Change the variable name from **us** to **ms** and increase its size
to **uint16_t** within the min_alarm_handler function. This update
allows the function to correctly handle the millisecond values in the
range of 0 to 999.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
There are more ipc_service backends that supports multiple endpoint.
This sample can be used for any of those backends, so this commits
makes the sample more generic. The default backend it still icmsg_me,
but now, the sample has files and instructions for icmsg_with_buf
backend.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
When connection manager (CONFIG_NET_CONNECTION_MANAGER) is disabled,
application starts right away. Scenario that it covers is when static
networking is used, like with emulators (QEMU, Native Sim, ...).
Since 'connected' flag was not set in such scenario, the internal loop
inside start_client() has ended up early and stop_udp_and_tcp() was called
quickly after starting TCP and UDP clients.
Set 'connected = true', when connection manager is disabled, so that it is
assumed that connection is working for the whole duration of the
echo-client sample.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
On SoC series s32ze, Zephyr application cannot run with MPU
disabled, skipping relevant samples/tests
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Introduce a streaming API that uses the same data path as the async API.
This includes features to the decoder:
* Checking if triggers are present
Adding streaming features built ontop of existing triggers:
* Adding 3 operations to be done on a trigger
* include - include the data with the trigger information
* nop - do nothing
* drop - drop the data (flush)
* Add a new sensor_stream() API to mirror sensor_read() but add an
optional handler to be able to cancel the stream.
Signed-off-by: Yuval Peress <peress@google.com>
topic#sensor_stream
Twister treats board revisions as separate boards, so s32z270dc2_r52
revision D must be added to the filters.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Remove nocopy feature from icmsg_me backend.
The backend is not meant to be used to send big
data chunks thus no-copy feature is removed.
If one wants to use no-copy it is recommended
to use icmsg_me only for control messages while
allocator will shall be written seperately.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
The current main stack size is not enough for any platform.
This commit stack size was checked for nrf52840 and nrf5340.
Everything works.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
PR allows to get rid of tinycrypt objects from
the final binary of the ble mesh apps based on
PSA TFM crypto.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Added initial version of Infineon AIROC WIFI driver
Added initial version of binding file for Infineon AIROC WIFI
driver
Rename CONFIG_ABSTRACTION_RTOS_COMPONENT_ZEPHYR to
CONFIG_USE_INFINEON_ABSTRACTION_RTOS
Exclude cy8cproto_062_4343w platform from
drivers.modem.esp_at.build test
Change revision hal_infineon to
69c883d3bd9fac8a18dd8384624b8c472a68d06f
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
This patch allow demonstrating fat_fs sample application on
stm32h747i-disco board with SD card.
Build fs_sample using following command
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/fs_sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Reduce the heap and stack sizes needed for the shell loader sample app
so more devices may try it out.
Tried on a mimxrt1010_evk and noted the total ram usage was
approximately 44000 bytes. Prior to this change the mimxrt1010_evk was
unable to run the sample as the bss section overflowed the ram size.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
For littleFS, the fstab entries in DTS are ignored currently.
So remove the overlay entries for the same. Also fixed-partitions
can't be used for sdmmc-disk. So remove the same. We just need to
have sdmmc node with zephyr,sdmmc-disk compatible string to have
littleFS working on disk.
build littleFS sample as follows:-
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf \
-DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
* Add support for running interoperability tests with
Qemu X86.
* Remove some debugging messages to allow binary to
fix Qemu Cortex-M3 board.
* Tune buffer and stack sizes to fit all boards.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add an initial test based on the broadcast audio source/sink samples
which runs them together and after waiting for a predefined
amount of time, checks how many audio packets has the
sink received, and if over a threshold, passes the test.
This test can be expanded after to cover more functionality from
these samples.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for the simulated nrf5340 and nrf52 in these samples,
as well as explicit overlays for the nrf5340dk.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix controller configuration overlay used when
building the controller (for nrf52 targets),
so the sample can connect to the source and get
audio through.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of handling some of the configuation thru
board overlays let's handle it thru the sample Kconfig
file, which reduces the amount of duplicate lines.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Disable the quadspi mpu region of the nucleo_f746zg
when testing the samples/userspace/shared_mem
or tests/kernel/mem_protect/userspace
The stm32f7 cortex M7 has 8 MPU regions and the one for quadspi prevents
the testcase to PASS.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the stm32-ospi-nor or stm32-qspi-nor compatible to run the sample
on stm32 boards without jedec,spi-nor compatible.
No more config file needed to get the jedec ID and SFDP info from the
external quad- or octo-SPI flash of the stm32 disco boards.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the required conf and dts overlays required for the
application on stm32h747i-disco board.
Also moved CONFIG_SDMMC_STM32_HWFC option from prj_blk.conf to
nucleo_h743zi_blk.conf as that is STM specific option.
Build the application as
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf -DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
