One of the nrfx_uarte event structure members was renamed,
so the sample code has to be aligned.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add installation instruction for adding nanopb to the west workspace.
This is required because it is optional and not installed by default.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Two substests (userspace and rtt) cannot be run in the posix
architecture.
Today they are filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These samples & tests cannot be run in this architecture
as it does not support userspace.
Today they are filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Compiler can't tell that k_thread_abort() won't return and issues a
warning unless we tell it that control never gets this far.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In the iso_receive sample, the semaphores were not reset in
each iteration.
This caused the ISO receiver to act incorrectly and cause
issues with some controllers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample enables CONFIG_NET_IPV4_MAPPING_TO_IPV6 and then
turns off IPV6_V6ONLY option which allows it to support both
IPv6 and IPv4 using the same socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The BT Core Spec v5.4 allows separate SDU_Interval to
be set on C_To_P and P_To_C directions,
but this is not possible with the existing interface.
This PR splits the interval parameter in the call to
bt_iso_sig_create into one for C_To_P
and one for P_To_C
It also splits the latency parameter into one for
C_To_P and one for P_To_C
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Bluetooth: ISO: update UI for extended API
The API for setting the SDU interval and latency have been updated.
This PR also updates the setting of these by the user in the shell
and the iso_connected_benchmark sample
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix the west invokation. "-t" is added automatically
to the run goal, otherwise we get a "-t -t" command.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Prevent infinite loop inside interrupt handler when there is incoming
data available and ring buffer is full.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add ADC support for longan nano.
Tested using samples/drivers/adc. Also added longan_nano.overlay
and updated documentation.
Signed-off-by: Maxin John <maxin.john@gmail.com>
Add test script that uses same configuration that the
interoperability test.
This is only checking that unsecure client registers and
responds to a GET query.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Remove gdbstub sample (samples/subsys/debug/gdbstub) as duplicated
by a test (tests/subsys/debug/gdbstub).
Update the GDB stub documentation.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Clone samples/subsys/debug/gdbstub to tests and convert it back
to a build-only sample aligned with documentation.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Enable LVGL widgets demo within Zephyr. This demo requires additional
stack and heap space in order to execute correctly, so raise the stack
and heap size to enable it to run.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The old Makefiles which can be used to build this samples
directly as Linux apps and the description in the READMEs
could be quite missleading.
Building this apps in this way has nothing to do with the
Zephyr native_posix/sim targets. This is about building
them as actual Linux applications without Zephyr or any
HW models.
So let's rename the Makefiles and change the description
in the docs to avoid confusion.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The flash sample and flash shell have implementations that differ
providing similar features.
This commit removes all the code in main.c, only `main()` remains to
reduce redundancy.
Features or improved implementations has not been merged into the flash
shell in this commit.
It should be possible to do in future commits if desired.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add additional RX stats for the BAP broadcast sink so that a
user can easily follow how well the RX is working, and
for several streams.
This also adds some additional logging to better see
what we are syncing to.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This application is no longer needed as we have removed
the automatic startup support which was used by this sample.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This adds a new sample for LVGL that displays a real-time chart for
accelerometer data acquired from &accel0 sensor.
This also adds the appropriate overlays so that the sample can also run
on native POSIX and native sim using emulated BMI160.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add new configuration value CONFIG_LWM2M_UPDATE_PERIOD
that allows calculating update period from last update,
instead of calculating it from the lifetime.
In runtime, server is allowed to change the lifetime of the
registration which causes update perdiod to be effected.
When fixed update period is preferred, UPDATE_PERIOD
config is then used.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Refactor the codec_cfg_get_frame_duration function to return the
assigned numbers value, instead of a converted value, but with
support for converting the value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Creates a generic sample application that executes a simple charging
task loop capable of completing a basic charge cycle.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Rename the Kconfig option from BT_ISO_ADVANCED to
BT_ISO_TEST_PARAMS to more explicitly denote that it
enables support for using the ISO test parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When relocating section symbol addresses the value where the
relocation is to be written is an offset into the section to load.
Simply rewriting it with the section address is not enough, we need
to write the address of the section with the offset into it.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
In the broadcast_audio_sink sample there are two pointers defined,
both referencing the same address. We reduce this to one pointer
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The commands showing west build had -b None which isn't quite right. Add
a :board: property with the tdk_robokit1 as its what I tested on myself.
Also noted that llext isn't supported on every architecture but
intentionally left this a bit vague as updating this little comment
every time something is added seems like a recipe for doc rot.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
When using multiple streams the seq_num provided to the
controller would be incorrect as we used a single global
seq_num rather than a proper seq_num per stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update babblesim tests for testing chaining for advertising to ensure that
we spill over to the next PDU
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Updates the chaining for advertising.
Instead of unconditionally adding a new PDU when new data
is added we now instead fill the last PDU in the chain with
the incoming data, only adding a new PDU when there is
not enough room.
This reduces the nr. of PDUs used for advertising, and also
fixes some qualification failures
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Follow up on commit f67dd39bb2
("drivers: ramdisk: use devicetree to instantiate RAM disk").
Unfortunately, the additional argument must be passed for the default
build. Using app.overlay would not always help since the sample has few
board-specific overlays.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Update to a fixed percepio tree, which allows the build to pass for valid
version numbers with 0 being one of the version number components.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The percepio build seems to have a bug and fail whenever the major, minor
or patchlevel numeric value is 0:
Invalid version specified: major: 3, minor: 5, patchlevel: 0
Disable the sample until a proper fix is available.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
