When linking with the 0.16.3 SDK version of picolibc, using long long
cbprintf support pulls in the full floating point printf which is much
larger than the integer-only version. This ends up overflowing the memory
region available for it. Increase the size of that by bumping the start of
the fake region by 8kB.
Signed-off-by: Keith Packard <keithp@keithp.com>
For all remaining samples which now set their integration platform
as native_posix(_64) switch them to native_sim(_64)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable the remaining samples which run now in native_posix also
in native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Clarify comment about why this samples is skipped in
posix arch based targets.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
Add conf and DT overlays for native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the docs replace references to native_posix with native_sim
* Switch the default test platform to native_sim from native_posix
* Add a runtime check for this sample
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
BINDESC can be used with any POSIX arch based target,
not just native_posix.
Fix the kconfig filter and the sample yaml filter.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Refer to the native_sim overlay instead of the native_posix one,
as native_posix is going to be deprecated soon.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
the reason is that the Mesh Profile clearly stipulates that Mesh nodes
cannot change their own element definitions.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
All in-tree touchscreen drivers have been migrated over to input, the
compatibility node has been removed from those boards as well, this
sample can be dropped now.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Do not enable subsystem/driver shell modules by default and stop abusing
CONFIG_SHELL_MINIMAL, which is internal to the shell subsystem, to decide
when to enable a driver shell.
The list of shell modules has grown considerably through the
years. Enabling CONFIG_SHELL for doing e.g. an interactive debug session
leads to a large number of shell modules also being enabled unless
explicitly disabled, which again leads to non-negligible increases in
RAM/ROM usage.
This commit attempts to establish a policy of subsystem/driver shell
modules being disabled by default, requiring the user/application to
explicitly enable only those needed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This simple application periodically prints the temperature and humidity
measured by one or more digital humidity/temperature sensors.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Add virtual LAN support to the sample so that it is easier to
test the multiple mDNS listener feature implemented in previous
commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace native_posix with native_sim as the
default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of always enabling fuse for native_posix,
let's give users instructions on how to enable it
while building.
In the documentation: replace the references to native_posix
with native_sim, improve the links, mention the flash
simulator, and provide a separate subsection for FUSE access.
Add a separate test for the sample with fuse access enabled
and be sure it is possible to run both this and the basic
one with native_sim (was filtered out before for native_posix)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
DTLS Connection Identifier support requires DTLS stack
that supports it. MbedTLS support in Zephyr is already
ported in, also some offloaded sockets support it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Since model struct most of member should not change at run time,
so mark as const will be suitable and safely.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Allow this sample in native_sim, and set it as default
integration platform instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Allow this sample in native_sim, and set it as default
integration platform instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix and native_sim are already excluded thru
the lack of required tags.
Let's remove the platform exclude instead of adding also
native_sim to it explicitly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace one of the dynamic threads with a static thread to show the
all the possible ways of creating threads.
Signed-off-by: Vilem Gottwald <xvigo.dev@gmail.com>
This commit has no functional changes. It makes the comments up to date
with the code and changes the code structure to ensure consistency.
These inconsistencies were introduced when the static thread definition
was replaced with dynamic, but the comments remained unchanged.
- Fixed outdated comments about the static approach that were
not corresponding to the code.
- Rearrange thread definitions, to obtain similar code structure
for both threads.
Signed-off-by: Vilem Gottwald <xvigo.dev@gmail.com>
For several samples that today have native_sim
enabled, enable them also for native_sim.
And set native_sim as default integration_platform
instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml, and switch
integration_platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the sample yaml
* Remove native_posix from the sample yaml platform_allow as it was
filtered out by the host libC
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc and shell script,
replace native_posix references with native_sim
* Provide overlays for native_sim(_64)
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename
Networking with native_posix
to
Networking with native_sim
replace all links to this page accordingly
and replace its references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This adds retry logic for ASE state notifications if failed due to
insufficient number of buffers to send ATT PDU. The state transition is
retried after connection interval delay.
Fixes: #64574
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In the docs replace the references to native_posix with native_sim.
In the sample, add overlays for native_sim, and add native_sim to filter
and as default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
Enable this test in natives_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>