After `otPlatRadioSleep` was fixed to properly set radio state to sleep,
radios supporting `IEEE802154_HW_SLEEP_TO_TX` capability would not be
able to handle `PENDING_EVENT_TX_DONE` while in sleep state.
This commit fixes such case.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
In d540cf8877 I tried to optionally enable the cache management
functions in Open-AMP introducing a new CONFIG_OPENAMP_WITH_DCACHE
symbol.
This is not working. Introduce a proper fix to have this actually
working correctly as intended.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The nRF9161 is technically a SiP (System-in-Package) that consists of
the nRF9120 SoC and additional components like PMIC, FEM, and XTAL,
so for nrfx/MDK the nRF9120 SoC is to be selected as the build target,
but since the nRF9161 is what a user can actually see on a board, using
only nRF9120 in the Zephyr build infrastructure might be confusing.
That's why in the top level of SoC definitions (for user-configurable
options in Kconfig, for example) the nRF9161 term is used and nRF9120
underneath.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Commit adds experimental support mbedtls psa as crypto
backend for ble mesh. It were run only on bsim tests.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Move the Segger RTT module Kconfig to modules/segger/kconfig. The Segger
debug library is not a driver and should not reside under drivers/debug.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With the stm32h5x, hal driver is xspi for octospi
Add a header file to map functions and constants.
The ospi driver of the stm32H5x serie does not support DMA yet.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit fixed Openthread kconfig option to use correct value and
description of units.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Similar to the changes made in #48048, compile in the appropriate lora
modem driver when `CONFIG_LORA=y`. The `LORA_SX12XX` symbol has no
use now so remove. LoRa and LoRaWAN subsystems are still marked as
unstable so no additional deprecation cycle is needed.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move tfm_merged.hex from <build>/tfm_merged.hex to
<build>/zephyr/tfm_merged.hex.
Use relative path to the runners.yaml hex file.
This makes it possible to move the build folder.
Example would be to copy out the runners.yaml and tfm_merged.hex file
and still be able to call west flash --skip-rebuild.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
- Added Cmakefiles for modules\hal_infineon\btstack-integration\,
where handle generation of Bluetooth include blob from HCD binary.
- Supported following device/modules:
-- CYW43012/MURATA-1LV module
-- CYW4343W/MURATA-1DX module
-- CYW43439/MURATA-1YN module
-- CYW4373/STERLING-LWB5plus module
- Added possibility to use user provided BT Firmware HCD file via
kconfig (path must be defined in
CONFIG_CYW43XX_CUSTOM_FIRMWARE_HCD_BLOB)
- Updated top makefile
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Enable DMA driver.
Add the path of the DMA driver header into include paths.
`hardware_claim` is depends by DMA driver, also enable it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Product URL: https://www.ti.com/product/CC1352P7
Datasheet : https://www.ti.com/lit/ds/symlink/cc1352p7.pdf
Features:
Powerful 48-MHz Arm® Cortex®-M4F processor
* 704KB flash program memory
* 256KB of ROM for protocols and library functions
* 8KB of cache SRAM
* 144KB of ultra-low leakage SRAM with parity for
high-reliability operation
* Dual-band Sub-1 GHz and 2.4 GHz operation
Updates:
* Remove CC1352P7_LaunchXL due to compliance checks
* Add CC1352P7 updates
* Update hal_ti for CC1352P7 support
* Remove blank line at end of modules/Kconfig.simplelink
* Split struct and typedef for pinctrl_soc_pin/pinctrl_soc_pin_t
* Reference cc13x2_cc26x2/pinctrl_soc.h
* Reference cc13x2_cc26x2/soc.h
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
OPENTHREAD_CONFIG_TCP_ENABLE is now set by the OpenThread build system,
based on the CONFIG_OPENTHREAD_CLI_TCP_ENABLE Kconfig entry.
Setting this symbol in the config file is therefore redundant, and
causes multiple build warnings.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The build will fail if `gpio1` is disabled in an overlay.
For example:
```
&gpio1 {
status = "disabled";
};
```
Signed-off-by: Francois Gervais <francoisgervais@gmail.com>
Add check in CMake files to prevent resource overlap for
TIMER0, TIMER1, RTC0.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In general, RTC and TIMER driver implements counter API but there
are exception when those peripherals are used in a custom way
(e.g. for system timer or bluetooth). In that case, system must
prevent using counter based on a reserved instance. Previously,
it was managed by Kconfig options but that cannot be maintained
when switching to devicetree configuration of the counter driver.
A new approach removes Kconfig options and instead adds static
asserts in the files which are using direct peripherals. Those
asserts check if given node is not enabled in the device tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit enables zephyr to configure the FatFs FF_FS_REENTRANT
option and support fs actions from multiple threads.
CONFIG_FS_FATFS_REENTRANT enables the option and provides zephyr
mutex wrappers.
Signed-off-by: Nicola Ochsenbein <Nicola.Ochsenbein@husqvarnagroup.com>
This commit extends the Zephyr module yaml scheme with additional
entries for sysbuild in the build section.
This allows for Zephyr modules to extend the sysbuild infrastructure
by providing additional CMake and Kconfig files to be included in
sysbuild.
The new settings are:
build:
sysbuild-cmake: <path>
sysbuild-kconfig: <path>/<file>
sysbuild-ext: <true>|<false>
sysbuild-kconfig-ext: <true>|<false>
those settings follow the same pattern as the equivalent Zephyr build
settings but are processed by sysbuild.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes an issue where thread preemption was not being disabled
correctly, failing to taking into account MetaIRQ, which can be
used to preempt any cooperative thread.
The updated code sets the current thread to `K_HIGHEST_THREAD_PRIO`
before calling the secure function, and restores the thread priority
level once secure execution has terminated, allowing the thread
to be preempted once again.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Adding an Openthread radio API `otPlatRadioSetMacFrameCounterIfLarger`
implementation and the corresponding call to the IEEEE802154 driver.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Remove `#include "utils/code_utils.h"` and macros connected with it.
File was incorrectly included in `diag.c` as it is OpenThread's header
used for examples only.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
added `otPlatDiagRadioTransmitCarrier` functionality
disabled OT power calibration support
fixed wrong check of `radio_api->stop()` return value
in `otPlatRadioSleep()`
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
The CANopenNode stack expects registered RX buffers to be processed and
matched in priority order. The priority corresponds to the index of each
each registered RX buffer with lower indexes having higher priority.
Depending on the CANopen COB-ID network configuration used, it may result
in overlapping CAN RX filters. In the case of overlaps, the priorities of
the registered RX buffers matter.
When receiving a CAN frame, process the RX buffers in priority order and
only dispatch the callback for the matching object with the highest
priority.
Fixes: #54364
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Added an option to disable and enable the continuous and optional
carrier functions in the nordic 802.15.4 driver.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
LEGACY_INCLUDE_PATH has been defaulting to "n" and marked as deprecated
in both v3.2 and v3.3. Drop the option entirely for v3.4.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Commit add hidden Kconfig option CONFIG_FS_FATFS_FF_USE_LFN
that is passed to ELM FAT to define FF_USE_LFN configuration.
The FF_USE_LFN still depends, indirectly, on choice
CONFIG_FS_FATFS_LFN_MODE config options
CONFIG_FS_FATFS_LFN_MODE_BSS, FS_FATFS_LFN_MODE_STACK and
FS_FATFS_LFN_MODE_HEAP, but the logic has been moved out of
zephyr_fatfs_config.h into Kconfig file.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
QCBOR cannot be shipped with Zephyr.
Allow the application to supply their own copy of QCBOR or let the TF-M
build system automatically download this dependency.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Prevents Zephyr from enabling the initial attestation service in TF-M,
due to a dependency it has on an incompatibly-licensed library (QCBOR).
This update checks if either of the following config flags are
enabled at build time:
- `CONFIG_TFM_PARTITION_INITIAL_ATTESTATION`
- `CONFIG_TFM_PSA_TEST_INITIAL_ATTESTATION`
If either of these are set to true, a fatal error will be thrown at
build time, indicating the reason for the failure.
This change can be reverted once a longer term solution to the QCBOR
license issues has been resolved.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Add glue code for the thrift module. This includes:
* workarounds for Zephyr's missing C++ facilities
* thrift config.h
This code was merged from the following repository
at the commit specified below, with minor formatting
and coding-style modifications.
https://github.com/zephyrproject-rtos/gsoc-2022-thrift
e12e014d295918cc5ba0b4c507d1bf595a2f539a
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The TF-M platform partition has now been ported to PSA firmware
framework 1.1 and can now be used together with the SFN model.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove setting of the TFM_LIB_MODEL option for IPC and SFN models.
This option is removed together with the library model.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix setting of TF-M floating point options when floating point is
enabled in the application.
FP design in Armv8.0-M architecture requires consistent FP ABI types
between SPE and NSPE.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
