The Kconfig option allows to set minimum expected sector size
to be supported by FAT fs driver.
When this value differs from CONFIG_FS_FATFS_MAX_SS the driver
will query device for actual sector size, expecting different
sector sizes for different device. When CONFIG_FS_FATFS_MIN_SS
and CONFIG_FS_FATFS_MAX_SS are the same, then there is slight
reduction if FAT driver size, as the query logic is removed
and CONFIG_FS_FATFS_MAX_SS is used for all devices.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Introduce an API mirroring the CMSIS-DSP's basicmath. If CMSIS_DSP is
enabled, then it will by default be used as a backend. Developers may
opt into a custom backend by setting CONFIG_DSP_BACKEND_CMSIS=n. If
done, the application must provide `zdsp_backend/dsp.h` and optionally
implement the functions in its own .c files.
Signed-off-by: Yuval Peress <peress@google.com>
Add CONFIG_CRC for building CRC related routines.
CRC routines are now being built for each application, whether used or
not and are add in the build system unconditionally.
Keep CONFIG_CRC enabled by default for now and until all users have
converted to use the new option.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a follow-up to commit c7327f5f70.
Wrap implementation of the `mbedtls_hardware_poll()` function in
`#if defined(CONFIG_MBEDTLS_ZEPHYR_ENTROPY)` so that the function
is provided only when that option is activated.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The code moves Zephyr specific code and CMakeLists.txt
under modules/fatfs/.
The commit also adds zephyr_fatfs_config.h header file, that
is now used to override FF_ options of ffconf.h file within
fatfs repository.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
net_pkt_get_frag() and a few other functions did not specify the
allocated fragment length, incorrectly assuming that fixed-sized
buffers are always used.
In order to make the function work properly also with variable-sized
buffers, extend the function argument list with minimum expected
fragment length parameter. This allows to use net_buf_alloc_len()
allocator in variable buffer length configuration, as well as verify if
the fixed-sized buffer is large enough to satisfy the requirements
otherwise.
Update the existing codebase to provide the expected fragment length,
based on the context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adding module files for building the Arm Ethos-U Core driver.
Updating TFLU module file to build Ethos-U operator.
Adding hal_ethos_u to west manifest.
Signed-off-by: Kristofer Jonsson <kristofer.jonsson@arm.com>
Signed-off-by: Fredrik Knutsson <fredrik.knutsson@arm.com>
Switch to use newest 2.10 API version in nrfx by default.
It changes signature of user callback in the nrfx_ipc driver.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Currently, the nrf-802154-spinel IPC service requires that the IPC
service node has a specific name (ipc0). This makes it impossible to
overwrite the IPC service node to be used by the Spinel serialization
without completely redefining the ipc0 node. Create a `chosen` property
called nordic,802154-spinel-ipc that can be reassigned with any IPC
service node.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
This commit adds API version symbols. The symbol is used in nrfx
drivers, where new API-breaking changes are introduced. Symbol
guards conflicting API.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
hal_nxp was added to cmake's include directories globally, without
checking if the hal is enabled. This made all Zephyr builds end up
including hal_nxp, even for other vendors.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
In order to avoid using multiple sources of truth for the platfom's
endianness, convert the in-tree code to use the (BIG|LITTLE)_ENDIAN
Kconfig variables exclusively, instead of the compiler's
__BYTE_ORDER__.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The can_frame and can_filter structs support a number of different flags
(standard/extended CAN ID type, Remote Transmission Request, CAN-FD format,
Bit Rate Switch, ...). Each of these flags is represented as a discrete bit
in the given structure.
This design pattern requires every user of these structs to initialize all
of these flags to either 0 or 1, which does not scale well for future flag
additions.
Some of these flags have associated enumerations to be used for assignment,
some do not. CAN drivers and protocols tend to rely on the logical value of
the flag instead of using the enumeration, leading to a very fragile
API. The enumerations are used inconsistently between the can_frame and
can_filter structures, which further complicates the API.
Instead, convert these flags to bitfields with separate flag definitions
for the can_frame and can_filter structures. This API allows for future
extensions without having to revisit existing users of the two
structures. Furthermore, this allows driver to easily check for unsupported
flags in the respective API calls.
As this change leads to the "id_mask" field of the can_filter to be the
only mask present in that structure, rename it to "mask" for simplicity.
Fixes: #50776
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Most IEEE 802.15.4 drivers do not support promiscuous mode, some do.
There is a dedicated L2 flag to signal this capability to clients.
Unfortunately the IEEE 802.15.4 L2 stack does not announce this flag
even for drivers that correctly expose it in their HW capabilities.
Some clients (notably the OpenThread L2) even uses promiscuous mode
without checking whether the driver actually supports it.
This change lets the vanilla IEEE 802.15.4 L2 check the driver's
HW capabilities to announce promiscuous mode on its 'get_flags()'
interface if supported.
The OpenThread L2 uses a constant (potentially incorrect) response
to 'get_flags()'. Fixing the OpenThread L2 is out of scope of this
change. This change just introduces TODO messages to the OpenThread code
so that the OpenThread team may fix the issue (or delete the TODO if they
deem it irrelevant).
Fixes: #51263
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This patch introduces support for NXP S32 devices, specifically for
S32Z27 from S32Z/E family.
NXP S32Z27 processors are composed of two Real-Time Units (RTU)
containing each four ARM Cortex-R52 cores with flexible split/lock
configuration, and dedicated internal SRAM.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Instead of using "select" on certain EC configurations, which is
considered unsafe for various reasons, use a "depends on" and rely on
the user to set a proper configuration in the config file.
Update the respective project configurations to comply with the new
configuration scheme.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
I've update FFF to run tests in the native CI for GitHub, so we no
longer need to run these extra tests. Remove the fff module from
west.yml since the module was only used in the CI and the header
was directly included in the Zephyr tree.
See https://github.com/zephyrproject-rtos/fff/pull/2
Signed-off-by: Yuval Peress <peress@google.com>
Add options about Internal RC(IRC) oscillator.
- GD32_HAS_IRC_32K/40K indicates IRC types.
- GD32_LOW_SPEED_IRC_FREQUENCY is the numeric value of frequency
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add option to enable the SFN model when building TF-M.
The SFN model will eventually replace the Library model.
Change the default model to be IPC, which follows the default
configuration of TF-M.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the source files compiled when `CONFIG_LORAMAC_REGION_CN470` is
enabled to link. Despite the naming, a `RegionBaseUS.c` function
(`RegionBaseUSVerifyFrequencyGroup`) is used by all four of the CN470
band implementations.
Validated by compiling `samples/subsys/lorawan/class_a` with
`CONFIG_LORAMAC_REGION_CN470` instead of `CONFIG_LORAMAC_REGION_IN865`.
Fixes#49960.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Up until now, the Zephyr CAN controller drivers set a default bitrate (or
timing) specified via devicetree and start the CAN controller in their
respective driver initialization functions.
This is fine for CAN nodes using only one fixed bitrate, but if the bitrate
is set by the user (e.g. via a DIP-switch or other HMI which is very
common), the CAN driver will still initialise with the default
bitrate/timing at boot and use this until the application has determined
the requested bitrate/timing and set it using
can_set_bitrate()/can_set_timing().
During this period, the CAN node will potentially destroy valid CAN frames
on the CAN bus (which is using the soon-to-be-set-by-the-application
bitrate) by sending error frames. This causes interruptions to the ongoing
CAN bus traffic when a Zephyr-based CAN node connected to the bus is
(re-)booted.
Instead, require all configuration (setting bitrate, timing, or mode) to
take place when the CAN controller is stopped. This maps nicely to entering
"reset mode" (called "configuration mode" or "freeze mode" for some CAN
controller implementations) when stopping and exiting this mode when
starting the CAN controller.
Fixes: #45304
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit prioritizes usec timer over msec. Doing so improves
CSL by helping scheduling timeslots on IEEE 802.15.4 with lower miss
rate.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
1. Move the defines from usb_dc_mcux.h to usb_device_config.h
and fsl_os_abstraction.h. These headers are used by
the SDK USB driver. usb_dc_mcux.h header file is not longer
needed and hence deleted.
2. Delete the Zephyr implementation of the usb_device_struct
driver and use the one implemented inside the SDK USB
driver. This requires updating the references to
usb_device_struct inside the USB driver
3. Move defines and structures used by the driver
out of the header file that is included by the SDK and
into the MCUX USB driver.
4. Use end point defines provided by Zephyr instead of adding
them locally.
5. Add a Kconfig to set the thread stack size
6. Move code to enable interrupts back to usb_attach function.
Interrupts should be enabled after the init is successful,
else we see errors of the ISR getting called before the
init is complete causing Faults
6. Update west.yml to update the NXP HAL to get the updated
SDK USB driver.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
LittleFS has some macros resolving to the Zephyr LOG_* ones, use
the ##__VA_ARGS__ for these so that they don't leave a trailing comma if
called with a single argument.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Set OpenThread specific cmake options depending on the selected
device type.
This reduces the number of libraries to build.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
If enabled the optimization is done at the expense of power consumption
on SED/SSED devices.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
In order to ensure that builds properly reflect the use of binary blobs,
it is important to markt the build as tainted. For that purpose
introduce two new Kconfig options that ultimately will be reflected in
the build image itself.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The old project, liblc3codec, is not used anymore. Rename the Zephyr
module name, folders, and Kconfig options based on the new name, liblc3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the can_state enumerations to contain the word STATE to make their
meaning more clear:
- CAN_ERROR_ACTIVE => CAN_STATE_ERROR_ACTIVE
- CAN_ERROR_WARNING => CAN_STATE_ERROR_WARNING
- CAN_ERROR_PASSIVE => CAN_STATE_ERROR_PASSIVE
- CAN_BUS_OFF => CAN_STATE_BUS_OFF
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change sourcing of generated Kconfig.module to be optional.
It should be possible to run parse the Zephyr Kconfig tree even if the
Kconfig.modules file has not been generated.
This can be useful in testing where you may wish to run without Zephyr
modules present, and thus not load the Zephyr module CMake module.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove the "z" prefix from the public CAN controller API types as this
makes them appear as internal APIs.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Debug log messages generated by mbedTLS library contain newline at the end
of log string. Remove this newline, if it exists, so that log output is
much more user friendly.
Add a dedicated Kconfig option for that, so it can be disabled on request.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So far LOG_DBG() was used inside debug hook for mbedTLS library. This meant
that it was hard to distinct log messages by simply looking at the log
level number, even though Zephyr logging subsystem supports colorful logs
depending on log level.
Choose an appropriate Zephyr LOG_*() macro based on log level coming from
mbedTLS library. Remove log level number from formatted log messages, as it
is now redundant.
One controversial thing about this change is that mbedTLS' "2 State change"
log level is mapped to Zephyr's "warning" log level. Those are not really
warnings in real life, but rather informational messages. However, using
"warning" log level for those allows to clearly distinguish between "2
State change" and "3 Informational" debug messages from mbedTLS.
Additionally, mbedTLS debug message implementation does not seem to be safe
to use in production, so keeping in mind MBEDTLS_DEBUG will be enabled just
during debugging phase, printing "2 State change" logs as warnings should
not be a big deal.
Set default MBEDTLS_DEBUG_LEVEL value depending on selected Zephyr logging
module level, so that only single option needs to be configured in
application project.
Remove prompt for MBEDTLS_DEBUG_LEVEL, so that interactively (e.g. via
menuconfig) adjusting MBEDTLS_LOG_LEVEL will always result in automatically
updating MBEDTLS_DEBUG_LEVEL option. This is to prevent so called "stuck
symbol syndrome".
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
