Add a new API that allows to register a callback that is called when the
maximum latency value changes. This can be used by SoC code to perform
actions based on certain latency values.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new API that allows to configure maximum latency requirements.
When the policy manager computes the next state, it will check if the
state brings too much latency based on requirements. This can be useful,
for example, if a certain driver or the application want a system to
respond fast, since any low power state that brings too much latency
will not be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The pm_constraint_* APIs were effectively used by the policy manager
only. This patch renames the API to the policy namespace and makes its
naming more explicit:
- pm_constraint_set -> pm_policy_state_lock_get()
- pm_constraint_release -> pm_policy_state_lock_put()
- pm_constraint_get -> pm_policy_state_lock_is_active()
The reason for these changes is that constraints can be of many types:
allow/disallow states, impose latency requirements, etc. The new naming
also makes explicit that the API calls will influence the PM policy
behavior.
All drivers and documentation have been updated accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add protection if number of string arguments exceed the limit
which currently is set to 32.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Create wrapper for printk to avoid including printk.h in __assert.h.
__assert.h is used everywhere thus should not have dependency to
printk.h.
Cleanup assert Kconfig options.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removed to store pmin and pmax at oberservation node structure and
use attribute list store for calculate time for next Notification.
Observation class use timestamp for triggering notification based on
resource update which use pmin and default pmax behaviour.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
There are no more context defines specific to metadata, the ones
coming from Assigned Numbers shall be used.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fix hwinfo documentation claiming API returns ENOTSUP for
unimplemented functions, with the correct ENOSYS
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Make it optimal without the need for an SVC/exception roundtrip on
every context switch. Performance numbers from tests/benchmarks/sched:
Before:
unpend 85 ready 58 switch 258 pend 231 tot 632 (avg 699)
After:
unpend 85 ready 59 switch 115 pend 138 tot 397 (avg 478)
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Move the can_set_bitrate() function to can_common.c as it is getting
quite long for a static inline function.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for getting the maximum supported bitrate in bits/s for CAN
controller/transceiver combination and check that a requested bitrate is
within the supported range.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This contains accessor macros for getting the maximum bitrate supported
by a CAN controller/transceiver combination.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for configuring pins to be used by the nRF PWM, QDEC, and
QSPI peripherals.
A new custom property "nordic,invert" is added to the pin configuration
group binding to allow configuring PWM channel outputs as inverted.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit fixes invoking of z_log_msg2_runtime_vcreate with wrong
param. This function requires to be called with dynamic or static
source based on CONFIG_LOG_RUNTIME_FILTERING.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
The enum did not contain an entry for unconfirmed messages. Instead, it
was only mentioned in the comment that 0 is the default for
unconfirmed messages.
This commit adds LORAWAN_MSG_UNCONFIRMED to the enum and changes the
parameter in the lorawan_send function to enum lorawan_message_type.
Signed-off-by: Martin Jäger <martin@libre.solar>
Following #42026, the body_start pointer now points to the
start of the body fragment in the recv_buffer as long as there
is body in it, either entirely or partially.
Rename the body_start to body_frag_start to better reflect
what it represents.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Extended logging v2 to support frontend api. Contrary to v1,
it is possible to have frontend and backends in the system.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Some configurations does not support VLA (e.g. CONFIG_MISRA_SANE).
Replace with a trick were fixed size array is used.
Note that this code is resolved at compile time so code size and
stack usage should be the same.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added new flags to packaging API:
- CBPRINTF_PACKAGE_ADD_RO_STR_IDXS - when set, read-only string
locations are appended to the package
- CBPRINTF_PACKAGE_ADD_RW_STR_IDXS - when set, read-write string
locations are appended to the package (instead of appending actual
strings)
- CBPRINTF_PACKAGE_FIRST_RO_STR_CNT(n) - indicate that n first strings
are known to be read only. Ignored in runtime packaging.
Add function for copying packages with optional appending strings.
Changed CBPRINTF_MUST_RUNTIME_PACKAGE to use same flags as packaging.
Aligned logging and test to those changes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Deprecate the macro in favor of DT_LABEL(DT_CHOSEN(zephyr_entropy)), and
promote usage of DEVICE_DT_GET(), where labels are not required.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactor the PAC location read and write. Instead
of storing the location in the service, the
location is now stored in the application, and
is retrieved by the service via callbacks.
Similarly, if a client writes the location, this
request is being sent to the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a sent callback that is used to notify applications
using the audio API when a SDU has been sent over HCI.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Sometimes there's a need to perform special operations on a heap
for a specified block. I.e. release virtual memory mapping,
power off memory bank etc.
The added procedure gets a pointer to a proper heap with metadata
for a given address.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
When operating on different kinds of heaps sometimes there's a need to
perform special operations on heap, poweroff memory bank when releasing
memory etc. Therefore some additional data may be required.
Metadata is a point to keep such data.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Hardware has asynchronous actions where the expectation is to spin on
registers and expressions against those registers for completion of the
action. This provides a common macro to spin, with a delay and timeout,
on such expressions.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add the IN_RANGE macro which returns true if a value is
within a supplied range of values (inclusive).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This is required by drivers which query the current cpu,
at this moment there is no arm aarch32 that use smp,
so it seems safe to consider that the current cpu is
always the first one.
This patch enable the use of the GICv3 driver on
ARM 32bits cpu.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
These definitions are required to be able to use GICv3
interrupts controller on an ARMv8 AArch32 processor.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
This is mostly a copy of the existing arm64 implementation,
at the difference that the AArch32 registers do not mention the
execution level.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
lib_helpers makes easier to access cp15 based registers,
it is inspired from arm64 lib_helpers but use
MRC instead of MRS and use cp15 register.
Definitions on how to access system registers for AArch32
Armv8 processors can be found in the document:
Arm Architecture Reference Manual Armv8,
for Armv8-A architecture profile
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
The ARMv8-R processors always boot into Hyp mode (EL2)
To enter EL1:
Program the HACTLR register because it defaults
to only allowing EL2 accesses. HACTLR controls
whether EL1 can access memory region registers and CPUACTLR.
Program the SPSR before entering EL1.
Other registers default to allowing accesses at EL1 from reset.
Set VBAR to the correct location for the vector table.
Set ELR to point to the entry point of the EL1 code and call ERET.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
This macro expands to DT_STRING_TOKEN if property exists, otherwise
falls back to default value.
Helpful when a non-required enum binding doesn't mention a default
value, but a default value makes sense to be set in the code.
Including DT_INST_STRING_TOKEN_OR and test code.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
The capabilities callback did not provide information about
the type of the endpoint being configured, making it
impossible for the application to determine if it is a
sink or source endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Audio streams as defined by the BAP spec does not
support bidirectional audio streams. This commit
updates the API and implementation to match that.
The use a bidirectional CIS with 2 audio stream will
be added in a future commit.
This removes the _IN_ and _OUT_ and _INOUT_ QOS
values, as well as the direction of the codec QOS
struct.
To keep direction for internal use, the direction
has been added to the endpoint struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BASS client implementation
This is a standalone implementation that
needs to be (heavily) modified for the
broadcast assistant role in the future.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BASS as a standalone service. The service is
used for the scan delegator role, which has not been
fully implemented yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make it consistent for audio.h and capabilities.h that the
array size parameter appear after the array parameter.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Reserve the upper 8 bits of gpio_dt_flags_t for SoC specific flags and
move the non-standard, hardware-specific GPIO devicetree flags (IO
voltage level, drive strength, debounce filter) from the generic
dt-bindings/gpio/gpio.h header to SoC specific dt-bindings headers.
Some of the SoC specific dt-bindings flags take up more bits than
necessary in order to retain backwards compatibility with the deprecated
GPIO flags. The width of these fields can be reduced/optimized once the
deprecated flags are removed.
Remove hardcoded use of GPIO_INT_DEBOUNCE in GPIO client drivers. This
flag can now be set in the devicetree for boards/SoCs with debounce
filter support. The SoC specific debounce flags have had the _INT part
of their name removed since these flag must be passed to
gpio_pin_configure(), not gpio_pin_interrupt_configure().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
