Modifications to incorporate latest write to new flash area
Modification to avoid writing garbage to new flash area when compactor
is called during init.
Modifications to allow erase at partition size instead of eeprom
pagesize.
Modifications to better separate rambuf usage from flash usage.
Corrected some errors in compactor
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This driver emulates a EEPROM device in flash.
Reworked implementation with modified flash layout.
The emulation represents the EEPROM in flash as a region that is a
direct map of the eeprom data followed by a region where changes to
the eeprom data is stored. Changes are written as address-data
combinations. The size of such a combination is determined by the
flash write block size and the size of the eeprom (required address
space), with a minimum of 4 byte.
The eeprom page needs to be a multiple of the flash page. Multiple
eeprom pages is also so supported and increases the number of writes
that can be performed.
The eeprom size, pagesize and the flash partition used for the eeprom
are defined in the dts. The flash partition should allow at least two
eeprom pages. For fast read access a rambuffer can be enabled for the
eeprom (by setting the option rambuf in the dts).
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Add device tree nodes for QDEC peripheral instances
for nRF5340 Application core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We've removed the need for label properties from the pinmux devicetree
nodes on all other controllers and its not required for the TI one, so
remove it from the .dts and drop label being required in the binding.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a simple pinctrl node for the IOF registers under the GPIO
controller node to be used by the pinmux driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add ESPI SAF features to the Microchip eSPI driver as
a separate file. ESPI SAF depends upon the core eSPI
driver adding the ability to attach the system SPI
flash to the EC eSPI endpoint instead of the host
eSPI controller.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
nxp_k2x.dtsi: Corrects Multipurpose Clock Generator binding
to utilize nxp,kinetis-mcg. Assign MCG to FlexTimer devices.
Enable FlexTimer clocks via System Integration Module clock
gate control registers.
Kconfig.defconfig.mk22f12: Enable default use of
CLOCK_CONTROL_MCUX_MCG when CLOCK_CONTROL is selected.
Signed-off-by: Ryan Holleran <rhollerar@gmail.com>
During the driver init, the function will set the sensor resolution
based on the driver's dts variable "resolution"
The driver's device tree has been updated to include the value
"resolution".
The default is set to the highest resolution of 0.0625C.
Moved mcp9808_reg_write from mcp9808_trigger.c to mcp9808.c
This allows resue of the same function in both the trigger and
resolution functions.
Function name changed to xxx_16bit to distinquish it from the 8
bit write function that will added.
Signed-off-by: Steven Daglish <s.c.daglish@gmail.com>
This CL moves def_lvol_io_list device-tree node from npcx7m6fb_evb.dts
to npcx7m6fb.dtsi. The benefit of it is that we needn't add
def_lvol_io_list node for each board dts file if there are no 1.8V
io-pads on the platform. If so, add them in the specific board dts file
directly.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add support for backup SRAM initialization found in multiple STM32
microcontrollers. Linker script facilities are also provided to make it
easy to define variables in the backup SRAM.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
In the wake of the removal of nRF5340 PDK board we also
remove the support for the nRF5340 Engineering A SoC.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Create a common binding file that will be included by all bindings
handled by iis2iclx driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Start using DTS values for PCI Vendor ID and PCI BDF. For the PCI
Device ID we do not use DTS since this would require changing overlay
for different SKU board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The compatible for the ARMv8 timer should have been arm,armv8-timer and
not arm,arm-timer. The dts binding file name was correct, just the
compatible was wrong. Rename dts, binding, and associated code to use
arm,armv8-timer.
Fixes#31946
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The arm64 timer node has not reg property and thus shouldn't be a
child of the SoC MMIO node. Move the arm,arm-timer up one level
to address this warning.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rework the litex,clk to use the clock-controller.yaml and remove
address-cells/size-cells as they aren't needed for the binding.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
