The binding did not define the PWM cells. Only channel and period have
been added as they are the minimum required ones (flags are not supported).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The PWM period cell will soon be required by the pwm_dt_spec facilities.
This patch adds support for it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to be consistent with other platforms, include the PWM
dt-bindings by default.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The PWM period cell will soon be required by the pwm_dt_spec facilities.
This patch adds support for it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The period cell will soon be required by the pwm_dt_spec facilities,
this patch adds support for it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to be consistent with other platforms, include the PWM
dt-bindings by default.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The PWM period cell will soon be required by the pwm_dt_spec facilities,
this patch adds support for it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The period cell will soon be required by the pwm_dt_spec facilities,
this patch adds it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Include the PWM dt-bindings by default, so that boards can use utilities
like PWM_MSEC() without extra includes. This is a common pattern done
for e.g. i2c or gpio.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The period cell will soon be required by the pwm_dt_spec facilities,
this patch adds it. Note that flags have not been added as they are
optional and not supported anyway.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Introduce has-interrupt-mask-reg DTS property for nxp,pca95xx driver.
This additionnal property allow to specify that the gpio expander has an
interrupt mask register that must be configured by the driver.
This allow to use this driver with PCAL95xx.
This fixes issue #44834.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
In order to be consistent with other platforms, include the PWM
dt-bindings by default.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
NXP LPUART IP supports loopback mode, where TX is internally connected
to RX input. Allow setting loopback mode up via the "nxp,loopback" dts
property.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Align the board dts with the recent changes in the "nordic,nrf-sw-pwm"
binding (remove the no longer existing `channel-count` property) and
add a node representing the edge connector for convenient referring
to SoC pins connected to it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
... and "nordic,nrf-pwm" binding:
- use channel indexes instead of pin numbers in `pwms` properties that
define PWM LEDs
- add the period and flags cells to `pwms` properties in all PWM LED
definitions; use the commonly used period of 20 ms (giving 50 Hz)
as a default setting
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
... to align with what is used in most other PWM bindings.
Update PWM nodes in SoC .dtsi files accordingly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Align with other PWM drivers and treat the `pwm` parameter (described
ambiguously as "PWM pin") of the `pwm_pin_set_cycles` function as a PWM
channel, not an SoC pin. This will also make the driver consistent with
the `pwm-cells` property definition in the "nordic,nrf-sw-pwm" binding
and with related `DT_PWMS_*` macros.
The change described above requires also providing a way to specify
SoC pins that are to be assigned to the PWM channels. Hence, the commit
introduces in the "nordic,nrf-sw-pwm" binding the `channel-gpios`
property that replaces the `channel-count` one.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Rework bindings documentation to clearly illustrate the role of ahb
(and cpu1) prescaler which defines the actual core clock frequency,
and not only a bus frequency.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use enum to describe the range of allowed MSI values.
This will help to detect configuration issues earlier.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On some parts, it could be required to use steps before applying
highest frequencies.
This was previously done as part of LL_PLL_ConfigSystemClock_FOO
utility functions which are no more used.
Use device tree to mention when this is required and implement it
in stm32_clock_control_init().
Additionally, fix the calls tp LL_RCC_SetAHBPrescaler, which require
use of ahb_prescaler helper.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Introduce a new scheme to define clock bingings on u5.
In a next steps, this new scheme will allow to provide u5 specific
alternate and complementary device clocks.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This new binding allows to work on providing stm32h7 specific
alternate and complementary device clocks.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The pinctrl support made usage of the 'peripheral'
property no longer required.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
those bindings are no more needed since pinmux was
deprecated in favor of pinctrl.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
to support implementation and peripheral usage of the pinctrl
driver API.
Removes deprecated "use-iomux" property from the SPI node.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
After pinctrl's subsystem support, I2C pin properties are
no longer required for pin muxing, however, this information
is still valuable in an eventual FSM failure if the target
SoC has no harwared mechanisms to support bus recovery.
In this case, bus recovery uses pin information to restore
the I2C bus state.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Adds hda link in and out drivers. The link in and link
out channels of HDA have small differences
with the host channels. Updates the existing
cavs_hda drivers and code to account for these
differences.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
all the consumers of the obsolete pinmux driver is
updated to use pinctrl API, this commit removes
the pinmux driver and assosciated sections.
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
This commit has the necessary changes to update the consumers
of pinmux driver(SPI, I2C, UART) and update the board specific
files to use the pinctrl interface.
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
Add pinctrl driver for CC13XX/CC26XX family of SoCs
to facilitate transition from pinmux to pinctrl.
`IOCPortConfigureSet()` from TI hal driverlib used to
implement the generic pinctrl driver.
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
LPTIMER has a different `countermode` meaning.
We shall exclude introduced property from lptim bindings.
Alternative property (e.g. `external-mode`) can be added
later on to support external counter mode.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
This PR fixes up the Scatter-Gather EDMA mode for the MCUX EDMA Driver,
as well as enabling the dma reload feature for the same EDMA Driver.
Signed-off-by: Nickolas Lapp <nickolaslapp@gmail.com>
