Using AON for GPIO kconfigs is very specifc to quark se, there
is no need to make this special for this platform. Use the
existing scheme instead.
Change-Id: I946431490380dc0f537d6056277a94c9c9c80fed
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
zephyr.h includes nanokernel.h which includes cpu.h, so make it
simple and just include nanokernel.h. zephyr.h should only be
included in applications.
Change-Id: I11a9ad8608d23af4f2a40a97eb71c09516c3399b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I2256c0f0bff5100e756709c9f99887af70bac661
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I977979bc86830768101ab9a2ca1928823ae994df
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The drivers config structure initializer sets sys_clk_freq statically.
The runtime repeated setup of sys_clk_freq is superfluous, and
inconsitent with const driver config structures.
Change-Id: I115e2b70b193b567de83132f3984e48b2dded0a2
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I8ecc10b50e23d2dbe987e3318bac09e235b1e1da
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@gmail.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: Ia2203f134c8d11f52a91e6245e7bdbb26f5a9e92
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@gmail.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I28789a7f1f26e4a0d499f5a89a567ae8c61eae51
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@gmail.com>
Change the Kconfig parameter type for the I2C slave address from
string to hex. The code that consumes this configuration parameter
expects an integer and fails to compile when presented with a string.
Change-Id: I493002ea6f1266344cac863ac305e59e93a5b1fe
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Don't use the previous reg value when setting up just one specific pin,
as it can have a side effect on other gpio pins.
Change-Id: I60e69950a72446a6fa7087b13dbcecf6ae4b15e4
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Set the value for the I2C address directly and use only
one per sensor.
Change-Id: I24d06a964e8e372eddf262b70fe5d9854a04563c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make sure we are connected to the right device.
Change-Id: I09e696563191392d23a316ad065bb7e320df76bb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
NRF_GPIO_BASE can be used by both the nrf51 and nrf52 families, as it
gets defined by the nrf5x.h header files.
Change-Id: I8e6b265d9ce94551389ca170f105a53c88d58c68
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Sensors are end-devices and usually nothing depends on them,
so set a global priority for all sensors and use it instead of
individual values per sensor.
Change-Id: I5847411e783ef8a8517f0ab1d8234810513707b4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Generalize the LOG_ETHERNET_LEVEL configuration parameter for use with
multiple ethernet drivers.
Change-Id: I26bc2189c8cf79db19f59e8082caec03b0d9c7b8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
i2c_quark_se_ss driver is deprecated and replaced
by i2c_qmsi_ss. So remove i2c_quark_se_ss definition.
Change-Id: Idcc6a7f01ffae626ae7d5f9966eac67be78599af
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
The new device control API added a 'device_power_state' variable to the
driver's data structure to keep track of the current power state set
for a device. This member variable is conditionally built into the
runtime data structure of each driver, but in some cases the whole data
structure is conditional on its respective API_REENTRANCY config
variable.
In those cases where the runtime data was previously used only for
reentrancy protection, the runtime data pointer used for device
initialization is NULL, and when power management is enabled, this
invalid pointer ends up dereferenced to get the device_power_state
member.
Make the declaration of the runtime data dependent on any of its
conditional members, and NULL only when all of those settings are
disabled.
Change-Id: I4f41e00ad8551a096db639e31d33f43752b6672f
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Add typecasting in dma QMSI shim to avoid compilation error.
The DMA API and QMSI have their own definitions for the
dma configuration parameters, such as handshake_interface,
handshake_polarity, source/destination_transfer_width,
channel_direction, and source/destination_burst_length.
When a API is called, the shim driver will assign values
for the above-mentioned parameters to the configuration
variable(based on QMSI's definiton) from the values in the
variable provided by the caller based on API's definition.
Even though all these parameters have similiar definition
and values in both the generic API and QMSI, QMSI uses
its own names which are different from those definied in
the generic API. Without typecasting, the parameter value
assignment will cause compilation error(even though error
only happens for some compiler).
Jira: ZEP-1031
Change-Id: I147c690799514bd611cd9f88316f44346e095359
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
As part of an effort to closely integrate with Zephyr OS,
removed the custom implementation of IRQ interfaces used
in controller code.
Jira: ZEP-841
Change-id: Ie427f45aeecad51053112371526cb7dc4817248f
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Code under SCHED_ADVANCED macro in ctrl.c is used to
disable advanced radio time space scheduling calculations
used for placing non-overlapping observer and master roles;
to populate connection parameter request/response PDU
fields, and autonomous generation of slave initiated
connection parameter requests.
This macro shall always be enabled for optimal and correct
operation of the controller, It shall only be disabled to
debug failures in other part of the controller, to rule out
this code's influence, if any, on the failure being
debugged.
Change-id: I04e5f837ef0a5658361bd3668f583f1e13504570
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Place __packed at the end of the structure definition in line
with the rest of the Zephyr codebase.
Jira: ZEP-732
Change-Id: I25aa731cbd188a6e23ca2035eb22fa919295bb25
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Leftover from previous commits, this macro is not used anymore in
the HCI implementation.
Change-Id: I376c92a6b68432d2ff818ea25e68f087131e8479
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use the net_buf structure directly when populating incoming
ACL data or asynchronous events. This ensures that no additional
memcpy() operations are required and removes completely the
statically allocated buffers in hci.c.
Jira: ZEP-726
Change-Id: I6ac8bd0becb7037ce8ecfac109f44832d23fcfd2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Preallocate a response event net_buf buffer before processing an
incoming command and provide it to hci.c so that it populates
the event directly, instead of using a temporary buffer than
must then be copied into the return net_buf.
This applies exclusively to Command Complete and Command
Status, since those are the only events that are sent in
direct respone to an incoming command.
Jira: ZEP-726
Change-Id: Ia3ea71ac497690af929c44308760f68491ea829e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Instead of copying the net_buf contents into a temporary
buffer byte-by-byte, the Controller HCI code now handles
incoming commands and ACL packets from the Host directly
in the net_buf containers, to avoid unnecessary memory
copying and to align with the rest of the Bluetooth stack.
Jira: ZEP-726
Change-Id: I9802607d84ee6206218b711e7e6e23dafb70581a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As part of the effort to consolidate the BLE Controller's
HCI layer, the functions in hci_driver.c now use the "hci_driver_"
prefix when it is sensible to do so, and prefixes have been
removed altogether when they are not required.
Jira: ZEP-726
Change-Id: Icd3e56e0170f15636245ea12a389a5a9e86c166c
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add PTB22, PTE26, and PTB21 to the frdm_k64f pinmux table, and helper
macros to board.h to map them to red, green, and blue LEDs respectively.
Change-Id: I257621467e71dfd9bdc5d97d6da444dfb5c58b2b
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
