Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
'enable-pin-remap' is defined as 'type: boolean' in
dts/bindings/usb/st,stm32-usb.yaml, so it generates either
#define DT_USB_ENABLE_PIN_REMAP 1
or
#define DT_USB_ENABLE_PIN_REMAP 0
depending on if 'enable-pin-remap;' appears on the node or not.
Since a macro is always generated, #ifdef won't work. The test needs to
be this instead:
#if DT_USB_ENABLE_PIN_REMAP == 1
(Should be careful with '#if HMZ == 0' though, because it's true even if
HMZ is undefined.)
This behavior was inherited from the old scripts, and some things depend
on it, e.g. by expanding macros in initializers.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch introduces a dedicated work queue for handling the events
from ISR (i.e. for notifying the USB device stack, for executing the
enpoints callbacks, etc.). The system work queue cannot be used for
this purpose as it might be used in applications for scheduling USB
transfers and this could lead to a deadlock when the USB device stack
would not be notified about certain event because of a system work
queue item waiting for a USB transfer to be finished.
The FIFO named so far `work_queue` is renamed to `usbd_evt_fifo`
to better indicate its purpose and to avoid confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch populates "clocks" property in stm32 usb nodes
for clock related usb configuration code of each dtsi files
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Cleanup around USB_NRFX_EVT_QUEUE_SIZE option.
Add value range for USB_NRFX_EVT_QUEUE_SIZE to Kconfig.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Use REQTYPE_GET_DIR and REQTYPE_GET_TYPE macros from
USB subsystem instead of specially introduced.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Check the device state before nrfx_usbd_disable and
nrfx_usbd_uninit. Otherwise it may lead to an ASSERT
inside the HAL driver.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Do not use NRF_USBD_EP_NR_GET in ep_is_valid because
it masks the higher nibble. Although this behavior is valid
to get an index from an endpoint, it is not suitable to check
if the address is incorrect, such as: 0x11.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Low speed isn't supported in device mode for any of the STM32
references.
Remove the code that refer to it.
Fixes#17114
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The shim didn't check if a given endpoint was enabled before requesting
the nrfx_usbd driver to perform a read or write operation on it.
In certain circumstances this led to nrfx_usbd driver being stuck in
a loop waiting for the associated DMA transfer to complete.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This reverts commit 03ef375f5f.
The cfg.en flag contains only the state of the endpoint as seen by the
shim. It is mainly used to enable the endpoints when the USB peripheral
becomes ready for operation (and the USB stack may want to enable some
endpoints earlier, especially the control ones, so the operation must
be sometimes deferred). In particular, setting this flag to false has
no effect on the actual state of the endpoint in the hardware.
Moreover, this flag was set to false for all the endpoints, including
the control ones which should not be disabled, so such operation
actually fooled the shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch removes the "hard" selection of the USB_DEVICE_REMOTE_WAKEUP
Kconfig option for USB devices made on the nRF52840 SoC. Now it's up to
the application to decide if it wants to enable the option. This change
makes it possible to pass the USB3CV Chapter 9 Tests for applications
that don't use the remote wakeup feature, since when a USB device only
reports that it supports this feature, and the mentioned option makes
it to do so, one of the test cases expects the USB device to actually
perform the remote wakeup. And when the feature is not reported as
supported, the test case is skipped.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The defines should have had a _0 on them, now that we generate the
proper defines, fixup the cases that used that old scheme.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add __ASSERT() for coverity issue CID: 198874. Assert is used instead
of check since this is callback we get from stm32cube.
Fixes#16573
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Prevent to reschedule a transfer if one is already ongoing (occupied).
This happens with USB class drivers scheduling transfer once interface
is enabled (netusb, ACM...) and cause freeze due to infinite loop in
low level driver.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup logging and fix style. Use hex format specifier
for endpoint address. Remove periods from log messages.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
usb_dc_mcux_ehci driver is one shim of the NXP SDK ehci driver.
select NOCACHE_MEMORY if HAS_MCUX_CACHE
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Return -EAGAIN on k_sem_take() failure to take write lock, the error
code is similar to nrfx write_in_progress flag.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This implements three API functions that are required for
tests/subsys/usb/device to build:
- usb_dc_ep_disable()
- usb_dc_ep_halt()
- usb_dc_ep_flush()
While halt and disable are trivial, flush is just a stub for now.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Make sure the parameters for the API functions are valid, return error
otherwise.
This is expected by the tests/subsys/usb/device test case.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Make sure that when e.g. CONFIG_SERIAL is set, CONFIG_UART_SAM0 is
selected automatically when the sam0 SoC family is used.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
I does make sense to use index only after we make sure it is valid,
issue is found in harness tests.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
