Determine if lpflexcomm wrapped lpi2c by instance and connect
irq differently dependending on that to support platforms with
both flexcomm wrapped and unwrapped lpi2c's.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The Low Power Flexcomm driver manages the interrupt handling
and provides an API to register interrupt callbacks.
Register the NXP LPI2C interrupt handler.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Update the driver to account for variations in the SDK driver
when it uses the instance number instead of the base address.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
With commit 1d7476af, it fixed a build error with config
structure no longer having a base address field but left
the local variable defined. This resulted in a build warning
of an unused variable 'config' in two places.
Signed-off-by: David Leach <david.leach@nxp.com>
With commit 734adf52c6, the MCUX LPI2C config structure no longer
contains a direct base address pointer. The base address must be
accessed via DEVICE_MMIO_NAMED_GET. Some declarations in the LPCI2C
target mode handler still used the old method of accessing the base
address, causing a build failure. Fix these accesses to use the local
declaration of the "base" variable.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable runtime mmio configuration in mcux_lpi2c driver. The fsl_lpi2c
driver relies on physical address to determine instance number.
So mmap flag 'K_MEM_DIRECT_MAP' is required.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
Update to shim driver compatible with the hardware block
in S32K344. Configure the pins before initializing I2C
to avoid happening bus busy.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
The MCUX platform always uses pinctrl, there's no need to keep extra
macrology around pinctrl. Also updated driver's Kconfig options to
`select PINCTRL` (note that some already did).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The I2C API recently updated terminology to replace "master" with
"controller", but this instance in the mcux lpi2c driver was missed.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Updates the API and types to match updated I2C terminology. Replaces master
with controller and slave with target.
Updates all drivers to match the changed macros, types, and API signatures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add I2C bus recovery support to the NXP MCUX LPI2C driver. Since the LPI2C
peripheral block does not natively support I2C bus recovery, recovery is
performed using GPIO bitbanging.
Fixes: #42574
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactors the remaining I2C drivers to use the shared driver class
initialization priority configuration, CONFIG_I2C_INIT_PRIORITY, to
allow configuring I2C drivers separately from other devices. This is
similar to other driver classes.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to preserve the
existing default initialization priority for most drivers.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Adds the ability for I2C drivers to report synchronous transfer stats
using a I2C specific macro to define the device instance.
The macro creates a container for device_state which allows for per
instance device class common data structure to be used in the device
class api (ex: i2c.h). This is used to maintain per driver instance
stats for all i2c drivers. This is a reusable idea across other device
classes as desired.
Using Kconfig device class stats may be turned on/off individually
this way as well, in this case I2C_STATS.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Ported commit 49a3ce5881
Transfer locking is required if multiple devices use the same i2c bus.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
These are all the case that coccinelle cannot find as they are inside
macro declarations.
Fixed via:
git grep -rlz -E "\(struct device \*" |
xargs -0 sed -i 's/(struct device/(const struct device/g'
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In all of these drivers, passing the device's data was sufficient as
only the data is being used by the HAL callback function then.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Abort I2C transfers through the MCUX HAL if a transfer fails to avoid
deadlock in the driver/HAL.
Fixes#25098
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixes the nxp and silabs i2c drivers to decode fast and fast+ mode bus
speeds as 400 kHz and 1 MHz respectively.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux lpi2c driver to use generated device tree macros
directly. Removes now unused dts fixup macros from i.mx rt and kinetis
socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Now that everything is DT based for I2C drivers we can rename the
CONFIG_I2C_[0..5]_NAME define to DT_I2C_[0..5]_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Ensure that no I2C start condition is inserted between messages of
a same transfer, except if explicitely requested (restart flag).
This fix issue with I2C register write functions.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
