This patch is doing several things:
- Core ISA and extension Kconfig symbols have now a formalized name
(CONFIG_RISCV_ISA_* and CONFIG_RISCV_ISA_EXT_*)
- a new Kconfig.isa file was introduced with the full set of extensions
currently supported by the v2.2 spec
- a new Kconfig.core file was introduced to host all the RISCV cores
(currently only E31)
- ISA and extensions settings are moved to SoC configuration files
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
ARCH_HAS_USERSPACE and ARCH_HAS_STACK_PROTECTION are direct functions
of RISCV_PMP regardless of the SoC.
PMP_STACK_GUARD is a function of HW_STACK_PROTECTION (from
ARCH_HAS_STACK_PROTECTION) and not the other way around.
This allows for tests/kernel/fatal/exception to test protection against
various stack overflows based on the PMP stack guard functionality.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The StackGuard area is used to save the esf and run the exception code
resulting from a StackGuard trap. Size it appropriately.
Remove redundancy, clarify documentation, etc.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add the appropriate hooks effectively replacing the old implementation
with the new one.
Also the stackguard wasn't properly enforced especially with the
usermode combination. This is now fixed.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
New KConfig options for 'A' and 'M' RISC-V extensions have been
added. These are used to configure the '-march' string used by GCC
to produce a compatible binary for the requested RISC-V variant.
In order to maintain compatibility with all currently defined SoC,
default the options for HW mul / Atomics support to 'y', but allow
them to be overridden for any SoC which does not support these.
I tested this change locally via twister agaisnt a few RISC-V platforms
including some 32bit and 64bit. To verify the 4 possibilities of Atomics
& HW Mul: (No, No), (No, Yes), (Yes, No), (Yes, Yes -- current behavior),
I used an out-of-tree GCC (xPack RISC-V GCC) which has multilib support
for rv32i, rv32ia, rv32ima to test against our out-of-tree Intel Nios V/m
processor in HW. The Zephyr SDK RISCV GCC currently does not contain
multilib support for all variants exposed by these new KConfig options.
Signed-off-by: Nathan Krueger <nathan.krueger@intel.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit enable PMP-based memory protection of code and rodata
instead of relying on non-writable real HW (e.g. flash). Use static
PMP region with PMP Lock bit to protect them in both user/supervisor
mode.
Signed-off-by: Jim Shu <cwshu@andestech.com>
GD32V processor core is used non-standard bitmask
for mcause register. Add option to configure the bitmask
to support GD32V.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Enable RISC-V GP relative addressing by linker relaxation to reduce
the code size. It optimizes addressing of globals in small data section
(.sdata).
The gp initialization at program start needs each SoC support. Also,
if RISC-V SoC has custom linker script, SoC should provide
__global_pointer$ symbol in it's linker script.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Increases the default CONFIG_TEST_EXTRA_STACKSIZE for the 32-bit RISC-V
architecture. This fixes the portability.posix.fs test on the
qemu_riscv32 platform.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This reverts commit 7b09d031fa. Because
context save of GP register is removed, we don't need to initialize GP
at thread init. GP will be a constant value so that it could only be
initialized at program start.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Plus added implementation for esp32c3 SoC.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
Increased stacks required for RISC-V 64-bit CI to pass. Most of these
were catched by the kernel stack sentinel.
The CMSIS stacks are for programs in samples/portability.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The CONFIG_FLOAT_HARD config previously enabled the C (compressed)
ISA extensions (CONFIG_COMPRESSED_ISA). This commit removes that
dependency.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Adds a new CONFIG_MPU which is set if an MPU is enabled. This
is a menuconfig will some MPU-specific options moved
under it.
MEMORY_PROTECTION and SRAM_REGION_PERMISSIONS have been merged.
This configuration depends on an MMU or MPU. The protection
test is updated accordingly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The IRQ handler has had a major changes to manage syscall, reschedule
and interrupt from user thread and stack guard.
Add userspace support:
- Use a global variable to know if the current execution is user or
machine. The location of this variable is read only for all user
thread and read/write for kernel thread.
- Memory shared is supported.
- Use dynamic allocation to optimize PMP slot usage. If the area size
is a power of 2, only one PMP slot is used, else 2 are used.
Add stack guard support:
- Use MPRV bit to force PMP rules to machine mode execution.
- IRQ stack have a locked stack guard to avoid re-write PMP
configuration registers for each interruption and then win some
cycle.
- The IRQ stack is used as "temporary" stack at the beginning of IRQ
handler to save current ESF. That avoid to trigger write fault on
thread stack during store ESF which that call IRQ handler to
infinity.
- A stack guard is also setup for privileged stack of a user thread.
Thread:
- A PMP setup is specific to each thread. PMP setup are saved in each
thread structure to improve reschedule performance.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Nicolas Royer <nroyer@baylibre.com>
- Set some helper function to write/clear/print PMP config registers.
- Add support for different PMP slot size function to core/board.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Introducing core E31 family to link Zephyr features (userspace and
stack protection) to architecture capabilities (PMP).
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adds handling of the FLOAT_64BIT option when determining the ISA
flags as well as introduces a new Kconfig option to enable/disable
the hard-float calling convention.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
The mabi and march options of the compiler and linker commands
were previously hardcoded and depended only on the 64BIT config
option. This update allows these flags to be set by the config
options currently available, plus an additional option to
specify the compressed ISA.
Signed-off-by: Jaron Kelleher <jkelleher@fb.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a common definition for NUM_IRQS in arch/arm/core/Kconfig and
arch/riscv/Kconfig. That way, the type doesn't have to be given for
NUM_IRQS in all the Kconfig.defconfig files.
Trying to get rid of unnecessary "full" symbol definitions in
Kconfig.defconfig files, to make the organization clearer. It can also
help with finding unused symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
