This adds a driver for st7789v lcd controller, and TL019FQV01 lcd.
The bulk of the driver is based on the existing ili9340 driver.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
We generated a define for each instance to convey its existance of the
form:
#define DT_<COMPAT>_<INSTANCE> 1
However we renamed all other instance defines to be of the form
DT_INST_<INSTANCE>_<FOO>. To make things consistent we now generate a
define of the form:
#define DT_INST_<INSTANCE>_<COMPAT> 1
We also now deprecate the DT_<COMPAT>_<INSTANCE> form and fixup all uses
to use the new form.
Fixes: #17650
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move display.h to drivers/display.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move spi.h to drivers/spi.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A basic display driver is added for a generic 32-bpp framebuffer.
Glue logic is added to the x86 arch to request the intitialization
of a linear framebuffer by the Multiboot loader (GRUB) and connect
it to this generic driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add support of Seeed 2.8" TFT Touch Shield v2.0 to ILI9340 driver.
This driver supports color pixel formats of RGB888 and RGB565.
Signed-off-by: Bernard Lee <bernard.lee@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same change as in commit 8cf8db3a73 ("Kconfig: Use a short, consistent
style for prompts"), fixing stuff that got introduced since then.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The values for the registers like GDV, SDV and Boarder Waveform
depend on the panel and display controller. Add DT properties
and obtain such values from DT.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Adds a shim layer around the mcux elcdif driver to adapt it to the
zephyr display interface. Although the hardware and underlying mcux sdk
driver can support additional configurations, some shortcuts are
currently made in the shim that force a given pixel format, lcd data
bus width, and signal polarity. This works with the rocktech lcd module
used on imx rt boards, but will need to be updated for other display
panels.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
From the driver point of view, monochrome controllers from the ssd16xx
family mostly differ by the amount of row and columns that are
supported. If they support more than 256 rows and/or columns the
corresponding size or position is sent using 2 bytes instead of 1 byte.
This patch therefore adds the width-bits and height-bits DT properties
to make this configurable.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of hardcoding multiple times the display dimensions, use the
values from DT. This still assume 8 rows per page and 8 pixels per
bytes, but that should always be the case for this controller and a
monochrome display.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The SSD1673 driver currently use k_busy_wait to wait for the
controller to finish the execution of a commmand. However a display
update command can take from a few hundreds of ms (default LUT) to
almost a second (initial LUT). k_busy_wait is just a spinning loop,
which prevents all the threads with lower priority to not be executed
during that time. That could be the case for example of the shell or
the log thread.
As the timing is not critical, it's better to use k_sleep instead,
allowing the CPU to process other threads. In the long term it might
even be better to use an interrupt there, but might not be that easy if
we want to support to various SoCs that can be connected to such a
display.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Convert ssd1306 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-i2c" from compatible.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert ssd1673 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-spi" from compatible.
Fix up references in reel_board dts and sample.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Modified drivers to use DEVICE_AND_API_INIT() instead of DEVICE_INIT()
This will make sure driver_api,is populated at build time and is exposed
to user space
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
Return actual pixel format that is in use by the SDL display driver
instead of returning a hard coded value.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
This driver introduces an emulated LCD display for the native POSIX
board. The emulated display driver makes use of SDL2 to render the
displays frame buffer into a dedicated desktop window.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Clear SSD1673 display during display driver initialization instead of
triggering clear via setting contrast.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove the redundant semicolon used as a terminator in
`if`, `switch`, `while` statements.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Since the mb_display driver is specific to the microbit we can move
the GPIO pin defines from board.h into the driver. This lets us remove
one of the few remaining drivers that is including board.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There were several issues in the dts binding for the ssd1673 display:
* binding file mixed description & generation up together
* Use of BASE_LABEL
* orientation-flipped should have been of type boolean
Update the binding file to reflect these changes, and made associated
changes to dts_fixup.h and driver as needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A few issues with the dts support for the SSD1306 display driver:
1. binding file mixed description & generation up together
- rename most uses of generation to description and add proper
generation field into yaml
2. Drop use of BASE_LABEL, this shouldn't be used by most bindings
3. dts defines that are being assumed in driver aren't correct. We
should be using a dts_fixup.h in the sample to map the generated
defines to those used in the driver. We remove the incorrect
defines that the driver assumes right now.
4. Fixup 'segment-remap' and 'com-invdir' properties that are booleans
in the binding file and associated code changes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Minimal driver for ILI9340 LCD display driver including support
for adafruit 2.2" LCD display (1480)
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
The alignment went off because of the move to use internal fixed-size
integer types (instead of standard int types).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The code was so far requesting 5 ms refresh timer, however with a
default TICKS_PER_SECOND=100 this was always rounded up to 10 ms,
causing some flickering. The closest TICKS_PER_SECOND that will give
flicker-less display but also give optimal ms-to-ticks calculations is
250, so change the timer to match that. After this change any code
using the display is recommended to set 250 as ticks per second.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08f51e2bfd475f6245771c1bd2df7ffc744c48c4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Both the string and image rendering may want to take advantage of
scrolling and sequential display capabilities. Consolidate the APIs so
that there's a single one for images (mb_display_image) and a single
one for strings (mb_display_print). Both take a duration parameter for
the per-frame duration as well as a mode parameter which specifies
sequential vs scrolling behavior as well as an optional looping flag.
Change-Id: Ia092d771e3f1b94afd494c7544dab988161c539e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reorder the struct members for more compact layout. The current row
tracker tracks just values 0 to 2 so uint8_t is more than enough for
it.
Change-Id: I845c84aeb32d59ed0ebbd55d8b6cfda7ad19b75a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We don't need to store copies of the current and next image when
scrolling text, since looking up the font is just as efficient and
also consumes less memory.
Change-Id: Ia905164c5b5784afb52cb2bb38c1ab1d00817df0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a helper function to reset the state of the display, and make use
of it from the various public functions. This also ensures that the
timer is stopped before starting a new display routine.
Change-Id: I8a916b5b13c18b41b7fc3593e6d97e874ef117af
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an empty column between characters of scrolling text so that the
individual characters are more easily distinguishable instead of being
back-to-back mashed together.
Also adjust the default scrolling step interval so that the character
display frequency stays roughly the same as before.
Change-Id: Idca0dc149a84f3f99b753a28ad1120ce75b97667
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new mb_display_print() API which takes printf-style parameters
and outputs scrolling text instead of one character at a time. The
existing mb_display_str() API is renamed to mb_display_string() for
consistency, and now also takes printf-style parameters.
Change-Id: I59c42bcd74c62f05ecb6d097dc808b9e5c1984c5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds a simple driver to access the 5x5 LED display found on BBC
micro:bit boards. The display is so limited that no effort is done to
try to integrate with the existing console (which would likely make
the display unusable). Instead, dedicated mb_display_* APIs are added
that are specific to this display.
References:
https://www.microbit.co.uk/device/screenhttps://lancaster-university.github.io/microbit-docs/ubit/display/
Jira: ZEP-1990
Change-Id: I431b5b358b5f07592a60d3aed87eaab6ac20ce25
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>