The expire function can call net_context_unref() which tries to
get a semaphore with K_FOREVER. This is not allowed in interrupt
context. To overcome this, run the expire functionality from
system work queue instead.
Fixes#4683
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Due to copy paste issue, doc file for board nucleo_f030r8
had wrong file name.
Fix it with correct doc name
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
An edge condition was handled in a special way, even though the main
condition covered it well. More code, more jumps == slower code,
bigger binaries.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Mysterious TLS errors are printed if we try to work with too
small crypto buffer when https is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The old HTTP server and client library code is deprecated. The
new HTTP library will be based on net-app API code which requires
changes to function names and parameters that are not compatible
with old library.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This sample tesecase provides sample code :-
1. Triggers Low Power tasks into nrf52 SOC (CONST LAT and LOW PWR)
2. Triggers System Off state.
3. Wake up device through port Event by GPIO (Button 1).
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Add support for nrf52 series SOC. This patch Adds :-
1. Architecture specific Power Management APIs.
2. APIs for invoking various Power Management tasks into nrf52.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
nrf SOCs are capable of waking from Low power state or
Deep Sleep state using sense configuration.
So adding support for this in nrf GPIO driver.
Jira: ZEP-2623
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Now that net_buf has "native" support for sys_slist_t in the form of
the sys_snode_t member, there's a danger people will forget to clear
out buf->frags when getting buffers from a list directly with
sys_slist_get(). This is analogous to the reason why we have
net_buf_get/put APIs instead of using k_fifo_get/put.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code parsing received net pkt to get source or destination
sockaddr repeats multiple times in net_context.c.
Eliminate the duplication by net_pkt_get_src_addr() and
net_pkt_get_dst_addr() which can handle different internet protocol
(i.e. ipv4 or ipv6) and transport protocol (i.e. tcp or udp)
Fixes: #4421
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Rename net_pkt_get_src_addr() to net_pkt_get_addr() and make it able to
handle source or destination address.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Add support for loading IRKs into the controller as well as the LE
Enhanced Connection Complete HCI event. To simplify things, the old LE
Connection Complete handler translates its event into the new enhanced
one which is then the single place of processing new connection
events.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Makefile was using the obj-$FOO = form instead of the ob-$FOO +=
form, so if both slip and loopback are enabled then only loopback will
get built.
Signed-off-by: Michael Hope <mlhx@google.com>
The link to the DCO section in the contribution guidelines was pointing
to nowhere. It is replaced by an automated cross-reference in case the
DCO should change in the future.
Signed-off-by: Christoph Sax <c_sax@mailbox.org>
MESH/NODE/CFG/HBS/BV-02-C expects it to be possible to do a Set with
the existing src & dst addresses but with a zero period in order to
"cancel" the current subscription. In such a case the addresses should
remain set but the period be set to zero, similar to what would happen
if the period would expire.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The heartbeat subscription Count, MinHops & MaxHops should only be
reset when enabling heartbeat subscription. Any other actions should
keep it unchanged.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The heartbeat should only be sent in case the relay state actually
changes. This fixes MESH/NODE/CFG/HBP/BV-03-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
"4.1.2 Log field transformation
In order to compress two-octet values into one-octet fields, the
following logarithmic transformation is used: any two-octet value is
mapped onto a one-octet field value representing the largest integer
n, where 2^(n-1) is less than or equal to the two-octet value."
Log field transformation table:
Log Field Value 2-octet Value
0x01 0x0001
0x02 0x0002 through 0x0003
0x03 0x0004 through 0x0007
0x04 0x0008 through 0x000F
0x05 0x0010 through 0x001F
0x06 0x0020 through 0x003F
0x07 0x0040 through 0x007F
0x08 0x0080 through 0x00FF
0x09 0x0100 through 0x01FF
0x0A 0x0200 through 0x03FF
0x0B 0x0400 through 0x07FF
0x0C 0x0800 through 0x0FFF
0x0D 0x1000 through 0x1FFF
0x0E 0x2000 through 0x3FFF
0x0F 0x4000 through 0x7FFF
0x10 0x8000 through 0xFFFF
"4.2.17.2 Heartbeat Publication Count Log
The Heartbeat Publication Count Log value between 0x01 and 0x11 shall
represent that smallest integer n where 2^(n-1) is greater than or
equal to the Heartbeat Publication Count value. For example, if the
Heartbeat Publication Count value is 0x0579, then the Heartbeat
Publication Count Log value would be 0x0C."
According to this definition 2^(n-1) is an upper bound for n log
value.
Proposed Publication Count Log transformation table:
Pub Count Log Value 2-octet Value
0x01 0x0001
0x02 0x0002
0x03 0x0003 through 0x0004
0x04 0x0005 through 0x0008
0x05 0x0009 through 0x0010
0x06 0x0011 through 0x0020
0x07 0x0021 through 0x0040
0x08 0x0041 through 0x0080
0x09 0x0081 through 0x0100
0x0A 0x0101 through 0x0200
0x0B 0x0201 through 0x0400
0x0C 0x0401 through 0x0800
0x0D 0x0801 through 0x1000
0x0E 0x1001 through 0x2000
0x0F 0x2001 through 0x4000
0x10 0x4001 through 0x8000
0x11 0x8001 through 0x10000
According to Log field transformation table 0x0579 would be
transformed to 0x0B and should be to transformed to 0x0C.
This is required to pass MESH/NODE/CFG/HBP/BV-01-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Section 4.2.18.2 in the Mesh Profile Specification states:
"The Heartbeat Subscription Destination shall be the unassigned address,
the primary unicast address of the node, or a group address, all other
values are Prohibited."
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch fixes issue when receiving iv index greater than current
index + 42 in update mode. According to Specification when node is in
update state it should only accept iv index equal to the current iv
index. When node is in normal mode it should ignore index that is
greater than current index + 42.
This allows to pass MESH/NODE/IVU/BI-02-C.
Also this patch cleans up the iv update procedure, to make it easier
to read.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The lower transport layer is responsible e.g. for the Friend Queue, so
we need to have the buffer in its original parsing state there.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
I2C_1 is enabled in board's DT file but we need to enable
it also in boards default config.
I2C_0 doesn't exist in STM32L475 SOC.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Remove defines for IRQs we don't use. We should be getting this from DT
so this gives us a list of what we need to cleanup. Remove various
memory address offset defines to the ones we actually use.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Provide default settings in disco_l475_iot board for following
sensors: LSM6DSL, LIS3MDL, LPS22HB, HTS221.
Sensors are disabled by default.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to be able to default Kconfig "Trigger mode" choice
in a board Kconfig.defconfig, this commit provides it with a name.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
