Instead of every hardware number generator driver providing an
implementation of this function, use the random device API to
centralize the implementation of this function.
This is a very simplistic function that can be seen as a stepping stone
to refactor the random number generation in Zephyr.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Some "random" drivers are not drivers at all: they just implement the
function `sys_rand32_get()`. Move those to a random subsystem in
preparation for a reorganization.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The CLOCK_CONTROL config option is already defined in
drivers/clock_control, so there's no need to redefine it in arch/.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a net_buf_id() API which translates a buffer into a zero-based
index, based on its placement in the buffer pool. This can be useful
if you want to associate an external array of meta-data contexts with
the buffers of a pool.
The added value of this API is slightly limited at the moment, since
the net_buf API allows custom user-data sizes for each pool (i.e. the
user data can be used instead of a separately allocated meta-data
array). However, there's some refactoring coming soon which will unify
all net_buf structs to have the same fixed (and typically small)
amount of user data. In such cases it may be desirable to have
external user data in order not to inflate all buffers in the system
because of a single pool needing the extra memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In a case we get packet without fragments return -ENODATA.
The bug was discovered by Coverity.
Fixes#4637
Coverity-CID: 178334
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Previous max range value for RTO was 2 seconds, increase to 60 seconds
as setting larger values can be useful when debugging retransmission
issues on slow networks.
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
Due to parameters used, net_context_recv() call cannot fail (it just
installs a callback, no I/O performed).
Coverity-CID: 178247
Fixes: #4581
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add option to set initial Retransmission Timeout value. The value is
different from NET_TCP_ACK_TIMEOUT since latter affects TCP states
timeout when waiting for ACK for example.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If we receive lot of data fragments, then yield after initial
processing so that TLS thread can start to work on these.
If we do not yield here, we pile up data buffers and might run
out of memory more easily.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It might happen in TCP client, that the TCP connection is terminated
in which case net_context is freed. Check this and mark corresponding
net_context inside net_app to NULL. This way there will be no issue
to access already freed net_context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The client TLS code did not handle server issued close properly.
Now the connection is terminated properly and TLS thread is left up to
wait more requests from the user.
This commits adds new boolean field to net_app context. Because there
are already multiple boolean flags there, convert them all to bitfields
to save space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the TLS handshake might take long time before connection is ready,
check this before trying to send user data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information that we are sending plain data and receiving
encrypted data, the code claimed that we are sending encrypted
data which is not the case here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user closes the client connection, then make sure that
user can just call net_app_connect() instead of calling the
client init. The client initializes everything in net_app but
for simple re-connect that is not necessary.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that objects and samples have their return values fixed, let's
propagate them back up to the user if there's an error.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Previously, post_write and execute callbacks returned 1 when handled
and 0 for error condition. However, this wasn't detailed enough and
the engine can't propagate any sort of error back to users -- so it
doesn't even check the return values in many cases!
Let's adjust the resource callback functions of all objects and the
lwm2m_client sample to return 0 for success or a valid error code.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that we can access resource data in the lwm2m subsys, let's use
the user provided firmware push buffer (5/0/0) to also store the
firmware pull data.
This way the size of the firmware pull buffer is completely up to the
application.
NOTE: This patch adds a 64 byte firmware buffer to the lwm2m_client
sample for this purpose.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With the change to support multi-fragement buffers in the LwM2M subsys,
the OPAQUE data type was direct write methods were broken.
Let's fix OPAQUE handling by using the newly introduced getter methods
which can use multiple user callbacks (depending on the size of the
user provided buffer). Let's also add public methods for users to set
/ get OPAQUE data in resources for future use with DTLS key data.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The lwm2m_engine_get_resource() function needs to be made available to
other portions of the lwm2m subsys in order for firmware resource data
to be used in the future.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
During conversion from the ZoAP to CoAP APIs the use for this variable
was removed, but the variable itself was left in place.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
No need for 2 different defines to specify URI lengths in the source
for firmware pull method. Let's combine them.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Each content formatter should have a way of handling opaque data.
For instance TLV data will individually be able to specify a length
but plain text will take up the rest of the packet.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that the LwM2M library can parse across multiple fragements,
let's remove the larger than normal buffer size setting.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The existing LwM2M framework expected contiguous buffers and this
was the reason for the 384 byte buffer sizes. This was previously
a limitation of the ZoAP API. The new CoAP API doesn't have this
limitation and the LwM2M library has already been migrated to use
it.
Let's finish the process by replacing any contiguous buffer handling
with the correct net_pkt APIs to parse across multiple fragments.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
application/octet-stream is used to indicate opaque payload format.
Use plain text handler to handle the opaque format.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Use-cases for these subsystems appear to be limited to board/SOC
code, network stacks, or other drivers, no need to expose to
userspace at this time. If we change our minds it's easy enough
to add them back.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Certain interrupt-driven APIs were excluded as they are intended
only to be called from ISRs, or involve registering a callback
which runs in interrupt context.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
