Update the advertising data to advertise the Zephyr project web site.
Also provide references to the Eddystone specification.
Change-Id: Id9cfdf4d9be95bccab4152031479ab45f5b8a035
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This removes HR Control Point from Heart Rate Service Declaration.
This characterisitc is mandatory if the Energy Expended feature is
supported, otherwise excluded. Since we don't simulate Energy Expended
we shouldn't have this characterisitc in our service declaration.
Change-Id: Ibdfdb2dd48f28bd01763ee0a038faed08e30f84c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Combine both nano and micro tests and cleanup whitelisting
for the testcases to include all buildable boards.
Change-Id: I28d41b82fb60d75d4b172d9dd3ac7e71480053b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A template app that defines the power management hooks and
enables the power management related CONFIG flags. This
app will enable build testing of power management code inside
the CONFIG flags.
Change-Id: If26904f69333ff05a0711596218b51b828669de1
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Fixed the IPv6 address handling so that CoAP server works
with default settings when IPv6 neighbor discovery is enabled.
Change-Id: Idd0b0df61aaebed43a9c5a408a192add445cacfe
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can now say "make BOARD=xxx NET_IFACE=802154" to compile
IEEE 802.15.4 support into the CoAP server application.
The default is to compile for qemu and use slip.
Change-Id: I2c61ac91d4ae7b2c3611567646028bc751e0419e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The init, init_h5 and shell are not really samples but fit better in
the test category.
Change-Id: Id1a7ff31ad8767f858705bd952311cf64ff1f3f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Correcting the discovery method for SPI port. The current method is based
upon knowledge of a specific port and a *_DRV_NAME value. Instead this
should be based upon the use of the device_get_binding() for SPI_0.
Change-Id: I250f5dddf2a2e79c4714addf647b0c74bd79ec5a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
TinyCrypt provides implementation of AES CMAC so there is not need
for internal implementation in SMP code.
Change-Id: I15fe0daf8fca8c44b002636983b46502419c57a5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Consolidate networking tests into 1 directory where possible and put
files under samples/net where possible.
Change-Id: Ieb65e000e1717f4d53058f87e36840a0786d467b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: If26ed436211b40a009f60275ef64bfc9de5da066
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
i2c_quark_se_ss and dw_aio_comparator are just build tests that
enable Kconfig options and do not do anything. We have real samples
for those drivers now.
Change-Id: Ia8c0a1801b967205cc1c116a0887b46a7dc5bbbe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All SoC specific driver tests go to samples/drivers.
Change-Id: Ia9aa2140465320a548504ddb7a44569e2d2af6bd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample goes under samples/nfc directory where we will
have all nfc related samples.
Change-Id: I6e7664d8e0dcbfcb0d9e11e2c7b79d8217665757
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test should be under tests and is not a sample.
Change-Id: Ibb42207f72554516a650625a2cf4cc9cb7a0b021
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All 'real' sample application now reside under samples/ directly.
the nano and micro variants will be under the specific sample directory
and not split across the file system.
Change-Id: I0ddf929cff7a29749aa4944b4385af058d9cc74c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make the test case routines reside under tests.
Change-Id: Iea59a68e8b537954250d63923a88df267639e716
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move aio and i2c driver test cases to tests/ and change Makefiles
accordingly where applicable.
Change-Id: I28f24997f147dcd188973555df6024c44f3fb6e8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all kernel testcases to tests/ and change Makefiles
accordingly where applicable.
Change-Id: I130cc3919174e93b7130d55fb101bed1d5d7552d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is now safe to enable sys_thread_busy_wait() for ARM as an earlier
patch has fixed the build system to link against the correct intrinsics
library.
Change-Id: Ib5ed036d996461b91f372b2b3e8f597a925d3292
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This allows to decrease number debug messages using config option.
Change-Id: I987d25c6d4b18503d6beb7feab97e9207100323d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This enables use of ECC from TinyCrypt. Since ECC is heavy this option
is separated from general use of TinyCrypt in SMP code.
Change-Id: Ia550e4a5f89240c8e15d2b5acccc21993b44b471
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This option is not needed as none of sample uses sys_rand32_get.
Change-Id: I00620a2fa7ea926d09e4e8f86cbf8ca7080478b3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
sys_rand32_get appears to get stuck with same number for a while so
instead just increment the heart rate by 1 until 160 and then return it
back to 90.
Change-Id: I2aea870c68539271a1bb6190a958a7e2d1914dc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Force restarting advertising until nble is able to handle this by
itself.
Change-Id: Ife811eb69a63b98b3b0380b80e403d5d9dc10f22
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a single option for enabling use of TinyCrypt library for
crypto. This option selects all required TinyCrypt options
depending on BT features enabled. Thanks to this applications
only need to select single option instead of set of required
TinyCrypt features.
Change-Id: I2862e9ad3e204635f2ed3199433982bcfb7112f6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to use pseudo random numbers generator provided by
tinycrypt instead of constant using of HCI LE Rand command.
HCI LE Rand commands are used only to initialize and re-seed PRNG.
Using tinycrypt for NRPA increase size of sample shell application
from 86852 to 89700 bytes.
Change-Id: I06e7392d087908caf37cd3ae648ea0bd5cc4ce61
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The handle shall be the characteristic value handle not the CCC.
Change-Id: I677ca12fdd59023f2498f712b060197a59baee64
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can be used to focus on demonstrating a simple heartrate service.
Change-Id: Ib59c653ebe356784592c8468767b45c5240ec67a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add read parameters to read callabck
Merge bt_gatt_read_multiple functionality into bt_gatt_read.
This makes it easier for application to handle all types of reads
as same sematics is kept for them.
Instead of destroy callback, call read_func with NULL data to
indicated that read has completed. This makes it clear when
read is completed and parameters used for it are no longer needed.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if read has completed. Since destroy callback
is no longer needed it is removed.
Also note that bt_gatt_read doesn't take any user data parameter
and that destroy callback was acctually called with read parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_read_params.
Change-Id: I8d6ea136b1e61c1dae73cca868b53c48c45a5492
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
With NBLE driver it is not possible to register services before
bt_enable completes.
Change-Id: I71194150b807e183b0016accb600ae9538ba9b01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes destroy callback for userdata as bt_gatt_subscribe
doesn't take any user data parameters and that destroy callback
was acctually called with subscribe parameters.
We assume subscription is active if bt_gatt_subscribe returned 0
(ie write command was sent). This is due to remote might be sending
notifications before reply to write.
Also note that bt_gatt_subscribe doesn't take any user data parameters
and that destroy callback was acctually called with subscribe
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_subscribe_params.
Change-Id: I58ac9cd481ffa08ccc2d7a0464ca75f61fb280c5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Some tests take a very long time to complete, add a directive in
testcase.ini to mark them as such. Unless --enable-slow is passed
on the command line, these tests are not executed, only compiled.
app_kernel and test_sha256 marked as slow test cases. It appears
test_sha256 was being skipped earlier due to platform_whitelist line
which has been removed; the test should be able to run on all
microkernel-supporting boards. Same with test_aes, which completes
very quickly and is not marked as 'slow'.
Change-Id: I39ec8212f3fa10122ff786c10b6659d22bae64e3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There can only be one instance of an ADC, but we have code setup for
multiple.
Change-Id: I94eae2450bdc6b138ebad66f80a7c451cefe32a9
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The ADC for DesignWare is currently setup to handle multiple dev entries,
but there only ever exists one. No reason to add to complexity for multiple
if there is only going to be one.
Change-Id: I0b77ef91160776dcf0aea1a50b144fff2b2be9e2
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
It was, in a nutshell, wrong. Fortunately, the incorrectly
specified fields weren't being used by anything.
Change-Id: I0fa63fa16a267502744a7a2c82865c7de8b5446e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary functions to enable the tickless idle test
for Atmel SAM3 family processor.
Change-Id: I19e2a8c898dbbc687c980d06bb6c19de693b97a4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
On x86, IPM is not enabled for footprint min benchmark. Extends this
to ARC too.
Change-Id: I099fc00c9f8ee086118c63523ad28afd6c991732
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We have a new policy: users should not be able to configure
an interrupt with "forbidden" priority levels, and any priority
levels with special semantics will be activated by flags.
Change-Id: I757c19cfedcb1d0938eaf4da348ddafb71b3e001
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
W25Q80BL is the SPI flash chip soldered on the Quark SE development
board, for communicating with it, having support for using GPIO as Chip
Select is necessary, so it will be useful when testing that feature.
Change-Id: Idbf571cdb3b1ae8704d7a932bc0ac56dc53f8ff1
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Depending on the driver implementation, the name of the device will be
different.
Change-Id: I35395abe44727b39d930e4c123860fad7b13edfd
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
For this demo app, set the 2001:db8::/64 address in routing
table. This way we will be able to pass data using these
addresses. Something like this should not be done in real
networking environment.
Change-Id: I1764d5ae09ab95dd580c6b48d6f368bfe283a6a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-client will timeout the packet receive after 5 seconds.
This way we at least send something instead of waiting forever
if the packet is lost.
Change-Id: Idc332965786797df4ed04dc8b3ef49af32a3f436
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of destroy callback, call discovery_func with NULL attribute to
indicated that discovery has completed. This makes it clear when
discovery is completed and parameters used for it are no longer used.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if discovery has completed.
Also note that bt_gatt_discover doesn't take any user data parameter
and that destroy callback was acctually called with discovery
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_discover_params.
Change-Id: Iec4eb9795975ef2555502e13a682e13ff37742e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The echo-server uses only one code base for both microkernel
and nanokernel.
Change-Id: I7abdf76dc13c31e4f91d0fd9d3b870ffe20ac71b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-client uses only one code base for both microkernel
and nanokernel.
Change-Id: Ieaf9a969319537286181ba333e3a05bfa0e9363a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate setup for different low level bearer. By default the
Makefile will create version suitable for qemu testing using
slip. If one writes "make NET_IFACE=802154" then IEEE 802.15.4
radio specific settings are activated.
Because echo-client does not contain any processor specific
settings, remove the ARM config files and rename the x86
specific ones.
Change-Id: I0608b6172bdd044dd49dedf86477ef8a31391a23
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate setup for different low level bearer. By default the
Makefile will create version suitable for qemu testing using
slip. If one writes "make NET_IFACE=802154" then IEEE 802.15.4
radio specific settings are activated.
Because echo-server does not contain any processor specific
settings, remove the ARM config files and rename the x86
specific ones.
Change-Id: I2caf26979f32496c6efb4dd1f625a60e3e5f6744
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
struct bt_uuid is a 'tentative' UUID type and shouldn't be used for
UUID storage. Since tester application doens't know type of UUID
on compile time we need to have a common extra type that would
allow to store both 16 and 128 UUIDs.
Change-Id: Ia2775a457a732cf03ba7e4a59e6d654fcd1ab05d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Address configurations for different Kconfig options is difficult
to test under different environments. Make it simple at the moment.
Change-Id: I689649b11b4ccb1cf1ff0e90720fa03b6dc3656b
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Modify echo-client to send packet after packet received from
server and wait unlimited ticks. Current behaviour flood messages
to server irrespective of reception at server end. Modified
behavior only for nanokernel at the moment.
Change-Id: I6aa20c5b9fc9d6d1cf8f996e90735f5d2b986e5a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The echo-server and echo-client samples did not compile correctly
if one wanted them to work correctly using "make server" and
"make client" commands.
Change-Id: I955c6cc23c3192fcb1dfcfbda7df53050a71501f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enable CONFIG_CONSOLE_HANDLER and disable CONFIG_UART_CONSOLE since
tester reuses that UART.
Change-Id: Ia440d75f66d01f29d10b5d6a68fc052fd8b57fa7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This way we avoid bugs coming from wrongly (human) counted length.
Change-Id: I95eb87a78fc12d4c5e083ce1c65d8b690ad8db78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove float option from 'max' configuration and add a new
'float' test for hardware that supports floating point.
Move configuration files into directories to ease maintenance.
Change-Id: Ibf4c88ea946a78b8025bc61409b0ab661250f4fb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default number of IRQs is good enough for this sample.
Change-Id: I00f2088b4c82d60717563e36ebccfecac3983522
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This application reads the 'WHO AM I' register from a LSM9DS0
sensor connected over SPI.
Change-Id: I7b0631e9bc783aea60fdb489f40058e0c15275fb
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test builds the syncronisation app using the following config
options to verify if the build is successful:
- CONFIG_DEBUG
- CONFIG_NEWLIB_LIBC
Change-Id: Idf2fe948ab58982244b3590da938a83206103be3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds code to the gpio sample apps to run on Arduino due,
using the gpio_atmel_sam3 driver.
Change-Id: Ida16ceeabf55eb7efedc94c56ff875d8fad6456d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames the gpio_dw sample app to gpio, as this can be used
for multiple drivers.
Change-Id: I6f21237b5b8df10f531e47ad9f75cadfd619cd34
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_l2cap_chan_send does actually return the number of bytes sent.
Change-Id: I862a8519c752c6b26250a21be02a927a9326617c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that nble driver is supported bt_enable cannot be called blocking
since it is not supported, futhermore the call to bt_gatt_register
should be done after bt_enable is complete.
Change-Id: I404f8cd8b8339dba0fd26d24edeb718eba4bf225
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables this test case for arduino_101 platform.
Change-Id: I2a94fb90f4c57022ddf1ec11ab06bb5e59de9b6e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Board already defined in platform_whitelist
Change-Id: I2fed4b3c0663fd15d43ee697837a89439f7bd07a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Don't use NULL pointer if aquiring net buffer failed.
Change-Id: I11a22b832d1da9559b90abe0cb83eed56d14722f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds conversion of advertising data (adv_data) to be used by
bt_le_adv_start function.
Change-Id: I403ff7ebed89dbf763d258b5dcdabfbb2cb68260
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Test can be verified with
$ sanitycheck -s bluetooth/shell/test_nble -v
arduino_101 bluetooth/shell/test_nble PASSED
Change-Id: Icfc5892524041d169973bd6eb7d23b6ecffb98fc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix compiler errors when CONFIG_BLUETOOTH_BREDR is not enabled.
Change-Id: I003985a9769120b3314eaf1b9563a3bf9712e32a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move buf_data to the place it is used reducing errors when dynamic
channels are disabled.
Change-Id: I82f640ffa8046e1c9b5805658e69cb722856d445
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This reuses the existing code since that is not driver specific, with
this samples such as tester can be build using nble driver.
Change-Id: I6d9f3edf8deb2e84fce233ef02d1cd0ad6f52526
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Current quark_se target is not specified in
scripts/sanity_chk/arches/x86.ini list and apparently this is the
reason tests were not executed, change it to arduino_101.
Change-Id: Ifedcf08cc9b25839d389bd7eb92ed42012e9075a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Putting right target allows to build for arduino_101.
Change-Id: Ib11244c7f024c72f0ab0b15549be57c576bdef3c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently it is not possible to build for Arduino since wrong platform
was specified.
Change-Id: I85ff6f5adb003db9a0905d6afa04bb5dfbd55d53
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In addition to having a different CONF_FILE bt_enable needs to be given
a callback since nble driver cannot block while initializing.
Change-Id: I8bd2c79d0620e93dbecfef25c49c5529ff1ee954
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move BLE configuration to board and enable GPIO for NBLE.
Change-Id: I99c309656430936edf6766fc99fe83b011801bb4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test works for ARM, but not testing sys_mem_safe_write_to_text_section()
since base ARM image are XIP images.
This test could be enhanced to boot a secondary non-XIP image for ARM
to test writing to .text.
Change-Id: I56aef68afabe88588b61c273901491de0c24a39b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Applies '__stack' tag where necessary to ensure that stacks are
properly aligned.
All stacks must be properly aligned via the '__stack' macro tag.
Change-Id: Icfb04e246bd97b2185bb05e63647c7ab01993e36
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
A dummy test to verify SPI driver and API build properly.
Change-Id: Icb1ab282b4a0fa02ec949c96becdfdc16f20bc2d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduce the GPIO QMSI-based implementation. This is basically a
shim layer that implement's Zephyr's GPIO APIs on top of QMSI drivers.
This is an alternative driver that conflicts with the previous
GPIO_DW implementation. In order to enable it you must set:
- CONFIG_GPIO=n
- CONFIG_GPIO_QMSI=y
- CONFIG_GPIO_0=y
- CONFIG_QMSI_DRIVERS=y
- CONFIG_QMSI_INTALL_PATH="PATH_TO_QMSI"
Note that this driver currently only supports one controller instance,
GPIO_0. It is implemented this way due to a limitation from the current
version of QMSI. QMSI versions later than 1.0 doesn't have this
limitation.
Missing:
- support multiple controller instances (gpio_0, gpio_1, etc);
- enable level triggered interrupts in sync with system clock,
through setting INT_CLOCK_SYNC properly.
Change-Id: Ib61b153dae9741806a9a31d7dc1f82b96d000fbe
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
- Sample application now pulls data continuously.
- Adds information on the arduino analog input pins and ADC channels.
- CHANNEL is defined as a macro.
- BUFFER_SIZE is defined as a macro.
- Sets the sample to run on repetitive mode on ARC architectures
(applies to Arduino 101 ADC).
Change-Id: I6201fea3a98b5394c05eb3ac570793629431ac02
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Quark SE SS provides 2 valid GPIO controllers, thus enabling the built
test case for it.
Change-Id: I46c6ceb3d4fe78a87c095e24851d289720524a9c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We can save a great deal of RAM this way, it only needs to be
in RAM if dynamic interrupts are in use.
At some point this config option broke, probably when static
interrupts were introduced into the system.
To induce build (instead of runtime) errors when irq_connect_dynamic()
is used without putting the table in RAM, the dynamic interrupt
functions are now conditionally compiled.
Change-Id: I4860508746fd375d189390163876c59b6c544c9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a sample app to interface with TI INA219 power monitor.
The values used in the app are for use on Adafruit's breakout board
(https://www.adafruit.com/products/904).
This assumes the slave address is 0x40, where A0 and A1 are all
tied to ground.
Change-Id: I4116629171a98be6f2b9aa422dd3eb386b4d59c2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is being removed for a few reasons:
- AFAICT this is the only API in Zephyr that follows an allocate/free
model.
- There are no public APIs in the interrupt subsystem for releasing
or reconfiguring an interrupt. This code was relying on arch-specific
private APIs. If we really want to keep this capability we should
make these APIs public and consistent across arches.
- The use-case for this API is not clear, as Zephyr is not intended
for hot-pluggable peripherals. Built-in hardware tends to need its
interrupt for its entire life cycle.
- The current implementation of dynamic interrupts on x86 does not
support freeing a dynamic IRQ that was reserved with
irq_connect_dynamic(), causing this code not to work. To add this
would require reimplementing _get_dynamic_stub() to use a bitfield
or set of bitfields to track unused stubs rather than the simple
counter it uses now.
Change-Id: I7a03c134fb3498b91a1816318a88b293e26b846c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
nble sample is a copy of peripheral sample which now has support for
testing nble driver so a dedicated application just for that is no
longer needed.
Change-Id: Ia8ea2262fc2472a54c81b90eb86d9c0d4b12f42d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a test case that passes prj_nble.conf as CONF_FILE so that
the same code tested using HCI Bluetooth driver is also tested using
NBLE driver.
Change-Id: Ia4ad59d74b82c02007c55ea4fa8f53833d7a7fe5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to port samples which may use
CONFIG_BLUETOOTH_MAX_PAIRED.
Change-Id: I3e37df7cae63a4ac2219ce26408ae4d4f987645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no need to keep arch specific prj.conf for these samples are
they are always the same.
Change-Id: I0f93b5a47458f9800a6654cc45914b911b42b3e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These commmands don't have to return ATT error code, because
status BTP status is sufficient.
Change-Id: I5405bfbc0ad6fbac46eb3dab1ee63d3e18bf38fc
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds implementation of handlers for Configure Notifications
and Configure Notifications BTP commands.
Change-Id: I92c40836c09e145ea405226f321dd752ac16fc9f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds noifications and indications commands and event
related structure defines to the tester application.
Change-Id: I532ab6471d2e7671213bfa526e7261308dd4b2f6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enable seems to be more appropriate than Toggle.
Change-Id: I69ef509c47ddd7b76bc16684af60821328a7c647
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adjust printing bluetooth address in auth_cancel() user callback.
Change-Id: Ic39eeac36394d73eaee27c04bcad17e32704bbe7
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
_next member, as the name suggest, is internal and shall not be used by
application directly instead application must use bt_gatt_attr_next.
Change-Id: I7c137eae555475d024098cd14a54d965cb397eae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Let us know that bt_enable() is successful.
Change-Id: I70581d950a9a922e809804bacfbfa039b2fec2fe
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This makes sure the code behind CONFIG_BLUETOOTH_GATT_DYNAMIC_DB builds
properly and sanity_check is able to detect problems whenever there is
a change affecting it.
Change-Id: If46d1d9723f9daa494611e5a1799afd943e6519c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enable applications to build with a single table representing the
database where attributes don't have to store a pointer to the next
attribute thus reducing its size.
Change-Id: I4c84e2d50f9088a2f9879068890f0646e586e007
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Disabling ARC core allows to flash only lakemont and decrease unneeded
debug output.
Change-Id: Ifb913274302d7c69f1fb9c2e1747742d7a810627
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Test Nordic BLE on platforms which has support for it, at least we
need a UART configured to be connected to the chip.
Change-Id: I040fbb33436ae6bf973b521d52bf7b971993559a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
All of the authentication APIs deal with bt_conn objects. For
consistency it makes therefore sense to use the proper bt_conn name
space with them.
Change-Id: I47912d542373df511524cc6ad2532d6c9a76ca68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is needed for GATT Server tests to implement larger attribute
databases.
Change-Id: Id160ac81b3e393697bdacd3e19033e9ff7c10fde
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This is essential so that the application can be notified of
connection failures and also be able to know the reason for the
disconnection.
Change-Id: I30108958963f6aeac690612bb26738dc4c67ca80
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses proper bluetooth address during printing to standard output
when monitors connected, disconnected and security changed states
based on established connection transport type.
Change-Id: I87b54ee619c329ffa645bfbb5e453cf673b93181
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Change default board for nble app to arduino_101
Change-Id: I5f8cd57c9834e38125d9e17cd4c3a96427db702a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If device is operating in security mode 3 PIN request callback
is called before connected.
Change-Id: Ie36363ae7af2398276f9cc4d07126344588b9ae6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is almost exactly the same as the peripheral app, except that it
uses CONFIG_NBLE.
Change-Id: Ia6854bce2a0babd03a3ce3251a173ce7ddbfe374
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Unified bluetooth address types will simplify tester code.
Change-Id: I6d973ff05a8a8dcabb12c9543cd4d747db3e6680
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Emulation is not supported on basic_minuteia, only qemu_86
supports emulation.
Change-Id: Id1adc6db02aa22c86207db77fb16ac7548e09dac
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Intentionally only one CCC descriptor will be added to the database.
It's because this meets the conditions to pass PTS tests.
Change-Id: Ic29608e5a9fb4cee0c576d149e5dd26498b365ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The driver has to implement the logic in an interrupt based manner.
Applying the changes to the existing drivers.
Changing ADC's API and implementation as well to follow those changes.
Change-Id: Ie0c3e3e318f619ade6be935adb064a25446cc29c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove architecture config files and have just one, they are the same
now.
Change-Id: I6d719d5409569ae8e741fce20e90e16efa701385
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of relying on the Kconfig variables use a common scheme for
naming i2c devices and use it directly in application.
Change-Id: I745af68d7c1767cc8a24f9655fa45fa33f6baf93
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch introduces the 'QMSI RTC device driver' which is simply a shim
driver based on RTC driver provided by QMSI BSP.
Some config options are independent of the driver implementation used,
so use a consistent name for them. In this case RTC Interrupt number and
Priority use the same config options for both the QMSI and DesignWare
drivers.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_RTC=y
CONFIG_RTC_QMSI=y
Change-Id: I48292406e5472e5786f3b9abbeb71016a273bfec
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
uart.h may include pci/pci.h, so add drivers/ to the include search
path.
Change-Id: Ic48a88c97c45e805ee7aec1df884cdb60d6fa33a
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
This adds the config file for x86 based platforms.
Also, it no longer clears the screen at each counter update,
as the app is writing the same amount of characters anyway.
This gets rid of the screen flickering.
Change-Id: I1db6dd4b7978b764b7538e120354fc5d010df283
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extends the i2c_fujitsu_fram sample app to do multi-bytes.
Change-Id: I20ea0e08c340cf94158ad521c27d5315e522b6de
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the config file to build for x86-based platforms.
Change-Id: I42c32966507ba822726834a200edd079c90cc96b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make the i2c_transfer() to transact messages through the I2C bus.
It is useful for I2C storage devices, as now we can send one message
containing the destination byte/block address, then send the data
in another message. There is no need to construct one continuous
data buffer to send both address and data anymore.
The drivers and sample apps have been updated to utilize updated
API when appropriate. For i2c_dw, only master mode has been updated.
Slave mode will be updated once we can adequately test it.
Change-Id: I0a811d60567367817fcc8d15f5454e5c933722e2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updated board to arduino_101 and updated nanokernel_objects.c
NANO_CPU_INT_REGISTER macro args.
Change-Id: I5281a84138ef031ae82cdd80ab617f94b3f712af
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
We moved away from quark_d2000_ref_board and use crb for this board.
Change-Id: Ida1fb1675134c4eff7ecd9bf2e1cd1338df7635c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Shorten the name and remove the vendor prefix. No need to add
vendor to board names.
Change-Id: I68d441121c4034276706da63d7e5420ddf317149
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename class in pci_dev_info struct to allow to use C++ compilers.
Updated drivers to use new struct.
Change-Id: I17b94cb7bc094bccd615c8389a28589bfa90cab8
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Sanity test is disabling the ADC controller before doing a read.
Change-Id: I275a94244a13e80c12e6b39267c4a25dd5479002
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
() Adds board arduino_101, arduino_101_sss to sanity check.
This will build the tests against these two new boards
to catch issues.
() Updates existing sample apps to be arduino_101_sss instead of
quark_se_ss, due to renaming of boards.
Change-Id: Ic512728d2ce581539bc3ae4c9f6524d5bf01b296
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sample just prints 'Hello World', Nothing else.
Change-Id: I93af3fdc2de342e878bc038f937e7f1ad2231bd3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample is more than just a hello world, it demonstrates basic
kernel functionality that deserve to be its own sample.
A simplified Hello World sample will replace this one.
Change-Id: I9120daa1923f99def994e484783abe04db5b14eb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a sample app to utilize the PWM on Arduino 101 via the pwm_dw
driver. Refer to the source file header for more information.
Change-Id: I0ad0f24242185b7b99e66445629d676ffde0bba3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit also renames boards and makes naming consistent between
board name and defconfig files.
quark_d2000_reference -> quark_d2000_crb
quark_se_test_sss -> quark_se_sss_ctb
quark_se_test -> quark_se_ctb
Change-Id: Ibe6a5102edb987fe1d6ce32c8c392a87d45d6951
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo board is based on the X1000 SoC, so move galileo to
boards and create this SoC instead, inheriting all SoC related code
and configuration items.
Change-Id: I9b39f1b44644775ee48acae284b82bae7876fffb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds peripheral sample application that is configured
in LE SC Only Mode. It tries to set security level to FIPS right
after connection is created. Two paired devices are supported.
Change-Id: I78f3e3eeaf552c52f982035168e967016858a00b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of a switch statement use an if statement which is more
compact and readable.
Change-Id: Ie2cd703eef582b129d81331b4bbcee5e0eba2479
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those applications don't require active scan to be performed.
Change-Id: I7c4b52ab8aaa700ab4fea4e2b19a66d182f799b6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Included Services Found can be of type either Primary or Secondary.
Tester shall know the type of service discovered.
Change-Id: Ia78e0c76236bb0ce295a91c6617aa9eafdfcf60b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds missing Type parameter in the Notification/Indication
Received event. This parameter specifies if the IUT received Notification
or Indication.
Change-Id: Ia9f4fbf6ede99c72d6c7bddb87f1aeb3b8b97600
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds extends BTP with commands to register for characteristic
value indications and notifications. These commands require CCC handle
parameter taken from PTS in the MMI.
Change-Id: Ie97c85c47590c0e29c5d8cb65cefe5f022f79f47
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There is no point in trying to connect non connectable device.
Change-Id: I1e3d8486db7cd7ca80f226ec3f4c36ab43f14a1a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This application only connects and disconnects to found devices.
Change-Id: Ic4d5cde52da37a369aa0583ec774c4dd116c6c6e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This makes sure discovery UUID is a static variable so that it remain
valid once the scope changes.
Change-Id: Iaca9ab5d71f51e526dcd8439795e962bb359f9b2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The main purpose of sample app is testing H5 driver and catching
checkpatch build issues with H5 enabled.
Change-Id: Ia02cdcb38fc8f836de0e5f87b1afe428f7021673
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds very simple peripheral application that supports
Device Information Service only and doesn't support pairing.
Change-Id: Iaec1317a8894db11388408d3f65af8a38d1618c3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch replaces bt_gatt_attr_func_t with bt_gatt_discover_func_t
to be used as a type of discovery callback. The reason is
bt_gatt_attr_func_t don't return bt_conn which could be used
later on to issue other commands and to application to know
from which connection this results come.
Change-Id: I1f26c72ad5c8a0b97485a337c7005d34281586d7
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Multiple Characteristic Values command handler
to the tester. It allows to test if GATT Client can read multiple
values from a GATT Server.
Change-Id: I994ffac73eb8e6c0a7696dc41304efd9f01c35a4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Long Write Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client writes long values properly.
Change-Id: I788707b0a043ecad6be32d9e1f8d536765ebf41a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Write Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client performs write
operation properly.
Change-Id: I3afe167c7ca2789df7d288bbc06ffc8479240da8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Long Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client can read long value from
a GATT Server.
Change-Id: I1c2060f7ecd45ca18ed5f9e0747121236b283631
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client can perform read
attribute value from a GATT Server.
Change-Id: If95b8d2d3a5a62048bb6371ae80b2834c20d88e1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Signed Write Without Response command handler to the tester.
It allows to test if GATT Client can perform signed write operation without
acknowledgement form Server.
Change-Id: I14757e6a52abf87bed68103b2e6fbff200fb6bb8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Write Without Response command handler to the tester.
It allows to test if GATT Client can perform write operation without
acknowledgement form Server.
Change-Id: I3663e2e01c0fabfd75e4bedab0955700e3003522
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover All Characteristic Descriptors command handler
to the tester. It allows to test if GATT Client can perform discovery of
characteristic descriptors within specified range.
Change-Id: Ieb04b47168249d8d76eab840b4f54b8b6b450792
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover Characteristics by UUID command handler
to the tester. It allows to test if GATT Client can perform discovery
of characteristics based on known UUID.
Change-Id: Iab78ea7e5bc85e1fadc46b7e8f5b28ee4b9db16d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover All Characteristics command handler to the tester.
It allows to test if GATT Client can perform discovery of all
characteristics contained within specified range.
Change-Id: Ib70abaf1365fe4a73757507148723e66881b01de
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Find Included Services command handler to the tester.
It allows to test if GATT Client can perform relationship discovery.
Change-Id: I76c12fcd5e79d906b4e29b926a82a2022e505c40
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover Primary Services by UUID command handler
to the tester. It allows to test if GATT Client can perform discovery
of primary services based on known service UUID.
Change-Id: If5788c6f23481c7b4af85834bf8b113a97a4b66d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds implementation of passkey entry command in tester
application.
Change-Id: I0624ee9f899102284490a82f5bb0a68bb342640a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This adds implementation of pair command in tester application.
Change-Id: I55545bdf99e2828c17ec716069e925940f15d019
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This adds implementation of setting io capabilities command in tester
application.
Change-Id: I21ae68633fb74d78db6e5622e1ee518ef0eed632
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds stubs for SM commands defined in GAP.
Change-Id: I5aef256ade5a100eb0a582c5d9bd5eb8d01611f2
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch separates helper for converting address type to btp
specific.
Change-Id: Ied723e01f5548b10e063a6771f8824c0c35b4682
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch removes redundant tester_rsp_full public function with
wrapped tester_send function.
Change-Id: Iba517ed194e02045ca952b00b952c7608592fbbd
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
BTP Client received success response from the tester application too early,
so that next command was blocked due to pending ATT Request
Change-Id: I598c0e9e90984cac07f8b4ea265b0d6d69d3d18d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The basic is the same for both architecture, but using different
GPIO controller and pins.
Change-Id: Ie021461858736d90a47bdef2c9d5e655e2efa473
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Excluded from quark_se_ss due to insufficient RAM.
Change-Id: I75bb34c058c7c41d4f3baaf12ca110f23eb531b8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test uses too much RAM to run on Quark SE, but we now can at least
build it for generic_arc.
Change-Id: Ibdc144303d9d9c2049e4d5d4ec637b1e4778f392
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds a sample app to utilize GPIOs on x86 side of
Arduino 101. Refer to the header of source file for
more information.
Change-Id: Ie547618b2c4fb483d85d6458bd68dd2849e1d19d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app which displays an incrementing
counter through the Grove LCD, with changing backlight.
Please refer to the README file on how to setup
the hardware.
Change-Id: I95c0571edaeabb281ee06f3b32fad1ab5b64d924
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app to utilize the Fujitsu
MB85RC256V FRAM via I2C on Arduino 101. It does
simple read and write on the chip.
Change-Id: Ie20470f3701acb0e4fa9bc3d7b3676625839cf06
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for compilers conforming to the IAMCU calling convention
as documented by
https://github.com/hjl-tools/x86-psABI/wiki/iamcu-psABI-0.7.pdf
Change-Id: I6fd9d5bede0538b2049772e3850a5940c5dd911e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_get() thereby making the following APIs obsolete:
task_fifo_get_wait()
task_fifo_get_wait_timeout()
_task_fifo_get()
Change-Id: Iac626d9d6d4836033e06ffd5a2ca415ab2630b1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_fifo's file header to be doxygen compliant.
Change-Id: I1b37c0cdb08c6ceecc4b18c32b5ab9e91dd202c8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_mutex's file header to be doxygen compliant.
Change-Id: I5c5edfb70fa0cf4c6664bc21ce3869b1c22a4e71
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_map's file header to be doxygen compliant.
Change-Id: Id0d90e893883756c91bb5de3c2f5fdc20f40dc6b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_sema's file header to be doxygen compliant.
Change-Id: Ia5945a64ae597239c9f5ff9ca14231625b9cb467
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the test_pipe file header to be doxygen compliant.
Change-Id: I6761fb5078c08d9968482baba47758e0bc3fd0d9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_events' file header to be doxygen compliant.
Change-Id: I75f0fafbe7c7b81abda1db94fea3194962a446ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_put() thereby obsoleting the following APIs:
task_mbox_put_wait()
task_mbox_put_wait_timeout()
_task_mbox_put()
Change-Id: I174857bdf32fe7e59b79838185666cd557312814
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the test_mail file header to be doxygen compliant.
Change-Id: I890eeb8bfd2ac5ea16d06ad2f4ec0bbb00a77d79
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add a build test for the dw_aio_comparator driver to catch any compilation
issue.
Change-Id: Id9c8e49656f1fd5843183fdd2cd0eb8d53fc8c8a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a build test for the i2c_quark_se_ss driver to catch any compilation
issue.
Change-Id: Id7342c07f3630252a9a06b4afde9eea8f423287d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
clflush and mfence are not supported on `iamcu'
Change-Id: I25b7c582de3b8e2bbea3f219d4655c16763410f8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll in the future also have a three-wire UART (H:5) HCI driver, so
the current H:4 driver cannot have a generic name.
Change-Id: Id326ae63d6f4d273d0d0c6120143e2f8d62968d1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want fine-grained control of connection parameters.
The two APIs to provide this through are bt_le_set_auto_conn() as well
as bt_conn_create_le().
Change-Id: If5cddbbf017b868d768d18d2a09daf4af8aa00d8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add command for choosing the default connection.
Change-Id: Id100320f31cb0e99ab48b162b466f52f6273018a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All current user just want basic active scanning so a corresponding
macro makes more sense than something based on duplicate filtering.
Change-Id: I97787be24b89fad66f2a952c5d53ab76f4e062fb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Current MTU size was not sufficient to test GATT Client, where lower
tester requires to send data of length 512 +opcode +BT address.
This exceeds current BTP_MTU size.
Change-Id: I090c47975ecfe9a657d6ff1158b5dc764c8a78a1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Both places in the central app that enable scanning should do
duplicate filtering.
Change-Id: If7086667c78878355dc246aa3d0b5ebcbdd0ac7b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll need to have a much more flexible LE advertising API. This is a
first step in that direction. A convenience BT_LE_ADV() macro is
provided to ease converting application code.
Change-Id: I74854487bbdfb4b1cf1bee0b6351d1750a56ff86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_br_* is equally understandable and the same length as the
corresponding bt_le_* prefix on the LE side.
Change-Id: I1820f9b9fab6363b696072f6b70d57c0bc780078
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The data length was incorrect which caused the name to be truncated.
Change-Id: Ieaca7745fff89f0f5689b6d15bfc0386f59add47
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For test purpose pass NULL to bt_enable so it blocks until init
sequence is complete.
Change-Id: I875ff9a59bb3d1d2e799db6fc967da3aee3ac77a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Passkey should be entered with leading zeros so print them to avoid
user confusion. Due to printk limitation (no support for padding or
precision operators for decimal numbers) snprintf is used for
convertion.
Change-Id: I6e01f577c935147ec91038b6dce115fcd893ac99
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
For testing IPSP application against a Linux host it currently need some
extra steps since 6LowPAN is not enabled by default.
Change-Id: Id491e31ef9ad6eebca7497705e874c01a5493589
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This application uses Bluetooth IP driver to listen to UPD port and
echo back the data received.
Change-Id: Id8e58f5f8bf58ff5947441cbcb3131c0da27081c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds structure definitions for SM related commands and
events. Structs are mapped with btp specification and will be used
within commands and events implementation.
Change-Id: I82231cdab62d170b86c548acc14ffdcbd888473a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Those are debug feature and were enabled by mistake.
Change-Id: Id49078fd4b910578af35dbe8660d148a691a4f13
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Tests errno is retrieved per-thread with fibers and one task.
Change-Id: I0b0890f250a80a30806dc1294944aa42f4209ace
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Base address, IRQ, interrupt priority as well as the instance name: all
are now Kconfig based. Thus Applying the change to quark_se and
quark_d2000 platforms. Sample code is updated as well.
Change-Id: I1c225c1b68d94b22ca10423b50a78a0ba09a27a5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Base address, IRQ, interrupt priority as well as the instance name: all
are now Kconfig based. Thus Applying the change to quark_se and
quark_d2000 platforms. Sample code is updated as well.
Change-Id: Idcc89e6e9f4acc337fafc7d42f8de3061a5ece04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple RTC, either internally or externally.
Applying the changes to the DesignWare driver relevantly as well as
to the sample code.
Change-Id: Ia70e791a6c45e186cbc4dc900a268fa882331af5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple watchdogs, either internally or
externally. Applying the changes to the DesignWare driver relevantly as
well as into the sample application.
Taking the opportunity to apply propre style when need (80 chars limit
for instance).
Change-Id: Iad020c697846db483a70a748cfc8fe7147ec3c04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change the configuration to enable the sleep events in
the nanokernel event logger sample.
Change-Id: Iea5bde06736b0499c8517de1549dee894a9db094
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
build application for the supported platforms to catch any
breakage.
Change-Id: I31f3ffd3a95966ba72989a646d8ecd27efb55985
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This application creates a watchdog with 4.194s timout and reloads
every time it kicks (and does not force a reboot).
Change-Id: Ib128e2f7f91d05081d1bfb8cc24258b69bd3cb6e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a configuration that does not enable SSE and FLOAT to be used
with Quark systems.
Change-Id: I140d76893292bb9b0cef7c5a06acfd39529fe9ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since all the necessary bits utilizing UART by index have moved to
use device name instead, the uart_devs[] can finally be removed.
Change-Id: Idbae6b46c0af9eef6c22c59e121e9d6a6b52426a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Renames ns16550.c to uart_ns16550.c. This is to follow
the driver naming convention.
() Renames functions ns16550_uart_*() to uart_ns16550_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
() Renames CONFIG_NS16550_* to CONFIG_UART_NS16550_*
() Disable NS16550 for ARC as no port is defined anyway.
Change-Id: I76bbe25b9bc75eb62df81e533f84f4f63a5257b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With MVIC these can't be arbitrarily assigned and the vector must be
<irq num> + 0x20.
The correct number of vectors is now set for footprint-min on D2000.
Change-Id: Ibf59921dbc438c7465b7050dd74d0badc9a91fc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move btshell.h out of samples into include/misc and rename to shell.h
Move btshell.c into driver/console and rename to console_handler_shell.c
as an shell implementation based on new config
CONFIG_CONSOLE_HANDLER_SHELL.
Add shell_register_app_cmd_handler for an to app to optionally call so
that it can receive cmdlines not handled by the cmds registered with
shell_init
Change-Id: I5c1585e62ff7a0ee923c6c92833cc762cf912bad
Signed-off-by: Thomas Heeley <thomas.heeley@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample creates an alarm and repeats the alarm on every
interrupt.
Change-Id: I97583e3c5af826c51536f8d244c016e2c628e88a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Software interrupts or system calls aren't really appropriate for
zephyr, but we have an ongoing need in our test code to run a
function with arguments synchronously in interrupt context.
This patch introduces irq_offload() which allows us to do this without
separate initialization or having to manage fake IRQs in the
interrupt controller.
ARM assembly code contributed by Benjamin Walsh
<benjamin.walsh@windriver.com>
ARC is not yet implemented but will be in a subsequent patch.
irq_test_common.h has been removed and all test cases updated to
use the new API.
Change-Id: I9af99ed31b62bc7eb340e32cf65e3d11354d1ec7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replaces calls to task_cycle_get_32() with sys_cycle_get_32().
Change-Id: I3a41cd2fd185680d4c1deb2c07ffb82647211fc2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replace calls to nano_cycle_get_32() with sys_cycle_get_32().
Change-Id: I3ed2589489d4de3e79cab085122e95dabafe8915
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The sample suffix is redundant, since we are under samples.
Change-Id: Ifb59007f0c1b156c7bb306506e3b22efc9b993dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Avoid having to remove quotes wherever the platform name is used
by exporting the variable only once.
Change-Id: I4cb51901e4ac19d70d0310fe6bbacd157f586661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the following cruft from the nanokernel version of the kernel
event logger sample application:
1. MDEF file
This file is only relevant to microkernel projects.
2. References to advanced power management and tickless idle
These features are only relevant to microkernel projects
Change-Id: Ice9bbf0a3d73c45a9157bd38e0a2703f5915d51d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Original name was too generic and confusing. This patch renames
driver to pipe UART and moves it to console drivers folder. Kconfig
destription is also improved.
Change-Id: I716fdbf7d636bbdc03b0fce27a59fd866f473246
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This refactor the way stored keys are handled to avoid overwriting
existing keys with new keys in case of pairing failed. Main goal is
to delay update of keys (including type and encryption size) until
link is succesfully encrypted with new key (legacy STK or LE SC LTK).
To fix this properly, TK is used to store STK or LE SC LTK and updates
of keys properties are done only on successfull encryption. This makes
code less error prone since update is done only in one place in code.
Also quering SMP code for current key makes sure that correct keys is
used in case of re-pairing.
Change-Id: I6b9e3d8229de522143e0d1fbfe0bd8223dad2a56
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds Exchange MTU command handler to the tester.
It allows to test if GATT Client can initiate MTU Exchange Procedure.
Change-Id: I2e50cec27fb7b944f57a4a6487138adbf126bad4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds protocol specification for SM.
Change-Id: I9c6ef377d0e4ad261e466dfed3a35713cf79de12
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
If the SDU length is bigger than the amount data received in the first
packet it means it will be segmented in 2 or more packet until the SDU
is completed.
Since the MTU required by the upper layer could be much bigger than the
ACL buffer the code now request a buffer to reassemble the SDU.
Change-Id: I286d16e185f59a8128c4357dddebdc13145dfe31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add characterictic command requires to provide service ID to which this
characteristic shall be added. With this patch initialization will
succeed only if service with given ID exists.
Change-Id: Ie6223f293b4cac06f211556d29896b2e1ccd96ac
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling connect command in tester
application.
Change-Id: Ia35bcb33caf59b8df4a3cdc01c12d58fdeeecfe9
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to display passkey and confirm if it matches remote
device.
Change-Id: I22f706b6441210ef426702ec290a05112e06a4e2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Because of the way the loopback tester works, it needs much
bigger stack when sending packets in TX fiber.
Change-Id: I360f0cf1f35e654cb139565f19f24628fb5ab5ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove testcase.ini from net/test/test_15_4 from microkernel
version temporarily.
Change-Id: I1ee5d80142c6b2210629842e5e8d83370299657d
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch adds missing connection unref in disconnect command. Also
lightly status setting was refactored.
Change-Id: Ic2502d8df15e45c4aea25632642af3d8a4fb23cc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds missing packed attribute to structures.
Change-Id: I9bcc8a677ae296e41eebb530584977660df52ebf
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch extends Bluetooth Testing Protocol with commands used
while testing IUT as GATT client.
Commands are mapped to the procedures from Core Specification to make
use of Read Supported Commands command. Based on the response to this
command tester can determine which PTS test cases should be enabled.
If the IUT don't support eg. Reliable Writes, this command won't be
set in Read Supported Commands response, so that test cases that
test this functionality won't be executed.
Change-Id: I204a295698d4b69f73d0556b172770c4fd018009
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Buffer size is 512, so uint16 type shall be used to store it's length.
Change-Id: I5abaf7d783032ff41819f7b838d4016932dece20
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch separates helper for converting uuid received from btp
command to bt_uuid.
Change-Id: If7f5423a839379763928ba5e87678697b1721d83
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
IUT shall response with Invalid Offset ATT error code, if it exceeds
value length.
Change-Id: I5c7148c96324482f198332d475742bfb44274957
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The least significant bit of opcode is not used to distinguish between
command/response or events.
Change-Id: Icaa1b6d87968e095a7f231d43e74257f5acca379
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Add configuration files for new platform and adapt options
of the benchmarks for those platforms.
Change-Id: I7c5011966c3a99f0b1c2c3fc44ba05b67ac6f953
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test requires a huge stack and wont fit on Quark SE.
Generated binary is too large due to a large stack size defined.
Change-Id: I3446d614a58db1ab78941799ee41e898368db3b5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample depends on functions that are not available in
the MVIC driver.
Disabling while we wait for those to be implemented.
Change-Id: Icd03ef014cbcd890945c0e77e349cccfded62e22
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will allow tests to be built for this platform.
Change-Id: I2275ec71af6cdb6f71c131fa26c5eae2d91c2475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Prevents unnecessary features from bloating the size of the galileo's
minimal footprint benchmark project.
Change-Id: Ie689a2c6fe1409904c43ec9a24a0efc01e768e4c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
task_event_handler_set() only does event ID validation using __ASSERT(),
which cannot be easily tested automatically.
Change-Id: I060e3aa5b31f0a312e328e89db6f20cd800e9c5d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
ip_buf_appdatalen should be user_data->expecting otherwise
it is zero.
Change-Id: Iedb61a7f0e3516a5643da04b5963a2e241fd8bc9
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Change the init function name to have client string in it,
it is more logical that way.
Change-Id: Ie282151562620858dc78563f2a4e63f7fb4fc472
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
There's no reason to depend on this config option, in fact it looks
like it doesn't even exist.
Change-Id: I3e072466700ca7115dfde5af09b08f98707062bb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactors existing menu by putting as topmost selectable option
general bluetooth subsystem support instead so far Low Energy (LE).
Implication of the change is introduction of new BLUETOOTH_LE config
flag. The flag needs to be propagated to all existing bluetooth
related apps to make them buildable.
Change-Id: I608c1baad038e0ee4cccf44a3e597e16ae1f7f54
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
With this patch application can unsubscribe notifications
from Subscribe value callback directly, if BT_GATT_ITER_STOP
is returned.
Change-Id: I7873594f5dbe6e8c5bef11bf397a74cdc870a464
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch refactor reading of attribute values as a client.
Current MTU size is taken into account to determine if read
procedure has been completed or not.
For now, read procedure will be continued until whole is read,
or stopped by client.
Core Specification says that "The Read Blob Request is repeated
until the Read Blob Response’s Part Attribute Value parameter is
shorter than (ATT_MTU – 1)." (Vol 3, Part G 4.8.3)
Because application didn't know the current MTU value,
there was no way to determine if data received is complete.
Change-Id: I9d0e3f8638b58c3a4e39060333aedc133b775e3d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Fix the include paths in Contiki sources so that we do not
have to create links to include directories during compilation.
Change-Id: I9316f1e90474e0ee563557deadd0bdc321cbb0fa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This command will be used to add a descriptor to attributes database.
>> send 2 4 0 02000302cccc
Received: hdr: header(svc_id='\x02', op='\x04', ctrl_index='\x00',
data_len=2)
Received data (hex): 04 00
Received data (ascii): ('\x04\x00',)
> ACL Data RX: Handle 64 flags 0x02 dlen 9
ATT: Find Information Request (0x04) len 4
Handle range: 0x0004-0x0004
< ACL Data TX: Handle 64 flags 0x00 dlen 10
ATT: Find Information Response (0x05) len 5
Format: UUID-16 (0x01)
Handle: 0x0004
UUID: Unknown (0xcccc)
Change-Id: I64b77ce735e2dff10ae15290fb174b7f99876014
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This command is used by the tester to include service.
Service that is going to be included has to be already present
in the gatt database.
> ACL Data RX: Handle 64 flags 0x02 dlen 11
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0xffff
Attribute type: Include (0x2802)
< ACL Data TX: Handle 64 flags 0x00 dlen 14
ATT: Read By Type Response (0x09) len 9
Attribute data length: 8
Attribute data list: 1 entry
Handle: 0x0007
Value: 01000500aaaa
Change-Id: I12e1790be946c3cf10105c66a852da1cb23cf4bd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch changes the way the attributes are added to the database.
From now, attributes will be registered one by one in gatt_db_add function.
This change is needed, because the handle of the attribute is assigned
in bt_gatt_register, and the tester application has to respond to the
command with valid attribute handles.
Moreover, Set Value command rely on the attribute handle, based on which
it looks for an attribute with handle spacified by tester to set it's
value.
Change-Id: I1f251f9bd5579bde2a52ebe3f1997da49c1b1721
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This will be needed to pass tests that require Insufficient Encryption
Key Size error response.
Change-Id: Ie358686d3a9843527e0c3dbd3918daed4e4d2f4c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The same opcode was used to Device Connected event.
Change-Id: I51640ed81822311817e82e43998c476795a28d49
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
We know the needed values at build-time, so there's no point in having
a runtime mechanism of accessing them in the code. Having the values
as defines makes it e.g. possible to use them as input for defining
the size of buffer pools.
Change-Id: Ib7556644719bfb631e638fa5bf29f3d1747a5072
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Disconnect command is special since it is also used for cancelling
outgoing connection. Due to this is might be called with default_conn
set to NULL. To avoid conditional unref always pick extra reference
from default_conn for local use.
Change-Id: I59ad583becbf39a71366069d0307aa44f2c64174
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This commit fixes the nanokernel sample of the kernel event logger
that shows the event messages for context switch and interrupt events.
Change-Id: I4e972adb06b81f2f548bbabe8cd6577af633001c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
exclude Minute-IA platforms from tests that enable CONFIG_FLOAT.
Change-Id: Id186857403cb73d009b6e9e126c4e240f95dbf1a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test can only be executed on x86.
Change-Id: I4fe60dbee9dcb11f983855b507f53c2b9fbb54d0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Revises microkernel semaphore sub-system to allow ISRs and fibers
to give a semaphore without having to define a command packet set.
The microkernel server now supports a 3rd command type on its
command stack, allowing a semaphore to be given in a similar manner
to the one used for the existing "give event" command type.
Change-Id: Ibd7fb1a77949792f72acd20a9ee304d6eabd62f7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
We are interested in supporting some XIP x86 platforms which are
unable to fetch CPU instructions from system RAM. This requires
refactoring our dynamic IRQ/exc code which currently synthesizes
assembly language instructions to create IRQ stubs on-the-fly.
Instead, a new approach is taken. Given that the configuration at
build time specifies the number of required stubs, use this
to generate a build time a set of tiny stub functions which simply
push a 'stub id' and then call common dynamic interrupt code.
The handler function and handler argument is saved in a table keyed by
this stub id.
CONFIG_EOI_HANDLER_SUPPORTED removed, the code hasn't been conditionally
compiled for some time and in all cases we call _loapic_eoi() when
finished with an interrupt.
Some other out-of-date verbiage in comments related to supporting
non-APIC removed.
Previously, when dynamic exceptions were created a pointer would
be passed in by the caller reserving ram for the stub code. Since
this is no longer feasible, two new Kconfig options have been added.
CONFIG_NUM_DYNAMIC_EXC_STUBS and CONFIG_NUM_DYNAMIC_EXC_NO_ERR_STUBS
control how many stubs are created for exceptions that push
an error code, and no error code, respectively.
SW Interrupts are no longer triggered by "int <vector>" hard-coded
assembly instructions. Instead this is done by sending a self-directed
inter-processor interrupt from the LOAPIC, using a new API
loapic_int_vect_trigger(). In this way we get rid of dynamically
generated code in irq_test_common.h.
All interrupts call _loapic_eoi() when finished, since this is now
the right thing to do for all IRQs, including SW interrupts.
_irq_handler_set() for x86 no longer requires the old function pointer
to be supplied.
Change-Id: I78993d3d00dd153c9051c518b417cce8d3acee9e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In order to have a name according to the functionality of the feature.
This commit rename any text, function and variable related with the
Profiler name to Event logger.
Change-Id: I4f612cbc7c37965c35a64f06cc3ce5e3249d90e5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
These tests ensure the functions manipulate data as expected.
They do not currently test atomicity.
Change-Id: I3646b3a55ffb895c56dbb0d0bc39da5e1138e7a5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This simplify the handling quite a bit while the application can still
prevent the buffer to be freed by referencing it if necessary.
Change-Id: I5ed0e96e8d9e349b79ba31ba9568af61181e1065
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The test causes random failure so remove it temporarily.
Change-Id: I0b74877ad27d673099d0eecb191b6978bf9b40ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Buffer received over L2CAP dynamic channels needs to be unref by the
application once they are done with it.
Change-Id: If210be1c538cf0b550dd03094d007b6851cdfbf4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Networking code is in net directory in other parts of the
code base so rename network -> net in samples/microkernel/apps
directory.
Change-Id: Ic89d4616a28b4079f90351938f9798c7bf61ce05
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Networking code is in net directory in other parts of the
code base so rename network -> net in samples/nanokernel/apps
directory.
Change-Id: I5684f569f75aa0a9d66128cf786e60ced79fbaf0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Networking code is in net directory in other parts of the
code base so rename network -> net in samples directory.
Change-Id: I0ca0188c6844b0957270398d08b85a3153819e97
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The space that the HCI driver needs to reserve for its own use is not
necessarily symmetrical. E.g. even with the current H4 driver we only
need to reserve space for sending data but not for receiving it.
Keeping track of these values independently enables more efficient use
of the buffers.
Change-Id: I64917b545c5cd77356ed038d09afe76422334661
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add sanity test related changes to test_15_4 application in both
micro and nano kernel. config_whitelist in testcase.ini is not
accepting other than PLATFORM configs. So creating test folder
for sanity tests. src directory is still common for all.
Change-Id: Iffa4c588500367fa475aef8e0772f1c08946c5a4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for CONFIG_NET_15_4_LOOPBACK_NUM in test_15_4 application.
Change-Id: I57246f9db587f492cddc0d0be607b1ae4a78fbf7
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Now that we have the buffer type enum as part of the HCI driver API we
can take advantage of it to pass the buffer type information and not
have to have two separate callbacks.
Change-Id: Ib2ee5b1540e532c9b27903e97660a276c1293fbc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a necessary step in preparation for removing the buffer type
information from the buffers.
Change-Id: I29d8fae32aa660416a1c12e87840499c711e659f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to build sanity for both ARM and x86 archs.
Only supported platforms are enabled.
Change-Id: I499dbdee7b9df265affb2bba98b5bb100339fe18
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Tester application requires 3 UARTs and currently no x86 based
platform supports it. For convenience default to arch that allows
to run, not only build tester.
Change-Id: I086e72a580f56d94181a6d6eada7693ddd24dec1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I98a0720483d3f364b77fe6dc030c9169aa4ade67
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I4eb6cea592cce99dcc9e4c1b1219ebbf89eddd04
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to have a generic buffer API in order to efficiently transfer
data between different subsystems. The first such case will be the
Networking and Bluetooth subsystems where 6LoWPAN data will be passed
back and forth.
The needed API needs to provide enough flexibility for different
buffer sizes as well as custom protocol-specific context data.
The implementation offered in this patch follows the general design of
the existing Networking and Bluetooth buffer implementations by using
a backing array of buffer which is fed into a "free buffers" FIFO for
management. The main difference is that the API allows specifying
variable sized buffers for each created pool, as well as a minimum
amount of "user data" that's allocated as part of each buffer.
There's also an optional destroy callback that's e.g. useful for HCI
flow control in Bluetooth (for notifying the controller of available
buffers).
Change-Id: I00b7007135a0ff35219f38f48658f31728fbb7ca
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Currently it is only possible to build the tester for arm.
Change-Id: I7fd530ca09bfa41072420da774fba3b48a5d5a90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes BT_GATT_CHARACTERISTIC declare a local bt_gatt_chrc so the
applications don't need to declare themselves.
Change-Id: Icf3fad7dffea5667c6f13aa022a5722900da51e8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The spec says it should always be the very first descriptor after the
characteristic:
"BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part G] page 534:
3.3.2 Characteristic Value Declaration
The Characteristic Value declaration contains the value of the
characteristic. It is the first Attribute after the characteristic
declaration. All characteristic definitions shall have a
Characteristic Value declaration."
Change-Id: I6c38dea9cc4c1a05997edbd348e2759680472725
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
value_handle is not used for anything.
Change-Id: I3885d221b162eb3bd44956af64280baf61dc001b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_register will assign a handle if not initialized and removing
the handle makes it simpler to change the attributes since it is no
longer possible to have conflicting handles.
Change-Id: I787f7325cc990c360056b1aefd07bb7d7876b445
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow calling bt_gatt_register multiple times so different tasks
can add their own services separately.
Change-Id: I8143ddedfa1079087d608013d1a97b552a3007dc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds a NET_INTF makefile configuration option to the
echo_server sample application to allow Ethernet support to be enabled
by specifying NET_INTF=ethernet. It currently includes specific
support for the Ethernet device in the Intel Galileo.
Change-Id: I6b605db32d2d8a4259fc003724b2daa11c9a26d9
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
We want to make the naming convention ref/unref rather than get/put.
So far the only reference counted objects are the buffers and the
connections. For the buffers the new generic buffer API will also use
ref/unref.
Change-Id: I9fe8b8a6a50a8baf06ba231e8f6717a5a47dd292
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the attribute value is going to be changed by the upper tester,
(eg. to issue notification) for simplicity it can be stored in the
place of old one.
Change-Id: I03a6ebbda5d75e6ffa9c2fd6b3c0eab495623a11
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allow sending direct notification to a specific peer without
using CCC which is allowed by the spec:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part F page 507
3.4.7.1 Handle Value Notification
A server can send a notification of an attribute’s value at any time.
Change-Id: Ieff29216cb9ba197c0da92d7b22b26e63101cfa8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Set discoverable command is used to set the discoverable flags
in advertisement data.
Change-Id: If46a5e05379c5f589afb1658a7b275a82c52e4e1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds an option to enable L2CAP dynamic channel support, fixed
channels are not affected by it.
Change-Id: If36bece46b7b94142ea1ac976b878d1b5ae6a578
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap-register can be used to register a server:
btshell> l2cap-register 0x0080
bt: bt_l2cap_server_register (0x0011110c): PSM 0x0080
Change-Id: I2c2d9a4cba70b0cddaf352830659d206b609ee63
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The \NOMANUAL tag is a remnant from days of yore and is no longer
needed or useful. Cleaning up the code references to this.
Change-Id: I1b8cc9c9560d1dbb711f05fa63fd23386789875c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
an ifdef was removed leaving the endif in place, this restores
the origin ifdef.
Change-Id: Ibc4863e3d09c1c09525276ca8ae4aa9e52fbd568
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch enables defining microkernel events within source code.
This is similar to other private kernel object patches.
The test has been modified a little bit due to the fact that
the event ID is now a memory address, instead of numeric ID.
Change-Id: Ie3c8d4f4e459d9c631e50bb242cf7a05ca8ea82c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup header inclusion and only include zephyr.h in samples
and applications.
Change-Id: If7460f4c6305a1c1cfcfdcf6a9bb7423f410c5c6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates the 'gen_idt' tool to generate a mapping of IRQ numbers to
interrupt vector IDs, thereby allowing the IRQ priority to be utilized
when statically connecting an interrupt.
Change-Id: I2e54ceb65145682820dfbd8ca1ee6ec68d71ce1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I2f28a4dd2b1b372905638cbccdf987396999d7ec
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only driver specific public headers should be found in include/drivers.
All generic API are found in include/ directory.
Change-Id: Ic50931987bb9460fd4a3843abc6f5de107faf045
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
With this patch device name obtained from advertising packets
will be printed out.
[DEVICE]: D0:03:4B:DA:10:46 (public), AD evt type 0,
RSSI -83 AppleLETester
[DEVICE]: D0:03:4B:DA:10:46 (public), AD evt type 4,
RSSI -82
[DEVICE]: 00:A0:50:00:00:08 (public), AD evt type 0,
RSSI -80 BLE Keyboard
Change-Id: Ic5116bce958d5b4479d481c40b2658ab56ecb819
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch makes attributes discovery more easier from the point
of shell application user.
UUIDs of discovered attribute declarations are now printed.
For services handle range is shown.
btshell> gatt-discover-primary 1800
btshell> Service 1800 found: start handle 00000001, end_handle 0000000b
Characteristic properties are parsed to string and printed
with characteristic value handle.
Characteristic f000ffc1-0451-4000-b000-000000000000 found: handle 0000006a,
value_handle 0000006b
Properties: [write][write w/w rsp][notify]
Change-Id: I6823fa562206ccf336dc301ee71bc4a02cecc14f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Advertising type is already configured based on current settings.
Change-Id: I4b47237c9ea7c48eab05786f01b38ebe3250141a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
To allow the remote central to pair and encrypt the link.
IO capabilities are set to DisplayOnly.
Change-Id: I46459539f1b882952d29ee5eb8d17766715de4b8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
We had two attributes stored with the same handle.
Change-Id: Ib24912578b958d428d6b3da3c2f73994691622bb
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
BTP protocol specifies value length to be 2 octets value,
so uint16_t has to be used to store this length.
Change-Id: I2a911910475db305a0ff1f9ab70866d24aa47158
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Reworks the internal design of a command packet set so that
the command packet array is split out into a separate variable
lying in uninitialized memory. This shrinks the command packet's
data section footprint to almost nothing.
Note: A side effect of this change is that it is no longer possible
to define a command packet set as a "static" variable since the
CMD_PKT_SET_INSTANCE() macro now generates two variables.
Change-Id: I9c7ebe637edf879758589ff4a26ace1303790bf7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This test fails with exception debug enabled. Make sanity pass again
while we debug this issue.
Change-Id: I0df279d2ec2f8fb29c30d25ec0d05da18e929964
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds two new fields to the ISR_LIST structure (irq and priority) to allow
the decoupling of the vector ID and priority from the IRQ number at some
future time.
As a result of the addition of these two new fields, the gen_idt tool is
modified to both process these new fields as well as validate them.
Change-Id: I343dac68d99c78168a25b19784140f85d5db7578
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The galileo minimal footprint project requires at least 53 IDT entries
to accommodate the HPET. This is due to the current algorithm used to
map an IRQ number to an interrupt vector.
Interrupt vector = IRQ number + 0x20
Change-Id: I6de2cd72da631af04237615082823e7de65d8b22
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Enhances the existing nanokernel context test application to
validate busy waiting.
Change-Id: I08cd74f74ed596f0baa30d879e1d98000b1d4c85
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test takes too long to run, do not run it on multiple
platforms of the same architecture.
Change-Id: I3f121cfd22b99f3910fcbb9ef45a53b0abf79360
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently useful only for Galileo.
Change-Id: I8d4fafd530e11a50f91cedd0de1691393f270b9c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Moving the includes to include/tinycrypt. This will help make it
clear when looking at source files where each header originated from.
Change-Id: Ic79978da286f9c288868074a69262d89488925b8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Bad things happen if an SW IRQ is asserted before it is initialized.
Change-Id: I4ad48480c4d7bb5fc14d778d2566d73086300fa1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit breaks the sanitychecks
This reverts commit 93fa1053b21efe3d030ea060a31b80d6008d5bfd.
Change-Id: Ia52092e845c33234817a1cb27cd1f17064c65e7e
Signed-off-by: Anas Nashif <nashif@linux.intel.com>
Moving the includes to include/tinycrypt. This will help make it
clear when looking at source files where each header originated from.
Change-Id: I062cb3c6ecc5bc2ed2d28228d5926646b6b5f912
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Fixes the tinycrypt library to use Zephyr checkpath acceptable line
lengths.
Change-Id: Ia7bef46a39fa029cda826ec5b2d7d42036d9bdfe
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
If the other tasks try to trigger a SW IRQ before MONITORTASK
has initilized it, the CPU generates an exception.
Change-Id: Id2745d728a7cf15132096585c073f85f8306cb38
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Made the test_15_4 application to run much faster when it is
running inside qemu (started with make qemu0).
Change-Id: I4455eca4f0426e8acc8b87d93eb80f4d179a1b48
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is now possible to loop echo-server and echo-client test
applications together when they are running in qemu.
Start echo-server with "make server" and echo-client using
"make client" in the corresponding samples directory.
Change-Id: Ic852735f7bebc93e42873e98427e282902b3ca03
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows for compile test if analysis code builds.
Change-Id: I500d727a06ef065fc65465140062ec47d31e79fa
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This will be used to poll Zephyr to send it's supported commmands.
Change-Id: I12cb93a238cd14589123d88e9d9ba4d580dd6d71
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This is used to respond to the read request of characteristic
value.
Change-Id: Ia0518fae0d70e712621578a7938009345dbfaab4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds support to handle set attribute value.
Change-Id: I2631cc8744210cfd76add1be3d30e5a0f54b3a7e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds support for adding characteristic declaration and characteristic
value to the tester defined database of GATT attributes.
Change-Id: I108fc5a9bc5c7491fc354c71457d452baaedd868
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds support for tester application to cover GATT Server
automated tests. BTP ptotocol commands are used do drive stack to
build attributes database specified by the external tester.
Two commands: to add a service and to start the GATT server are
implemented.
Change-Id: I236c3e4d8636e97926514b2099779cb4334e95cd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch is needed to be able to test zephyr against tests
which require Zephyr to be non-connectable.
This adds handler for the opcode 0x06 - Set Connectable command.
Based on connectable flag in current settings, the corresponding
advertising type is set after issuing Start Advertising command.
If connectable, Connectable undirected advertising type is set,
if non-connectable Non connectable undirected advertising type
is set.
Change-Id: I77865b67c4b717548095ac5e398a873d1b739d6a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This feature is needed to pass some tests which require termination
of ACL link.
Change-Id: Idab03c569172ea6deb3bc5cf6744e5e73bd5de3e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
According to new tester API in case of success Current_settings
shall be returned.
Change-Id: I1caf05180bff4756b8e7271098611d23200af8ee
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
When the timer is set, the caller needs to specify the function
that is called when timer expires.
Change-Id: Iae69986c6f32b789d708247b187d143e45d73828
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These commands are necessary to pass some of the GAP tests.
Change-Id: Ia599e7dc3dd06aa5ac4130e0d878fcddad7b37dd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allows to not compile SMP support for devices that don't
require pairing. It is required to support SMP channel and reply
with error for any command received even if pairing is not supported.
To handle this cleanly a null smp implementation is used that case.
Change-Id: I656a52dac882839db904eee65f25a4e29ea2d8c2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to not compile data signing support if it is not
required. Reduces image size of peripheral sample app from
45772 to 44436 bytes.
Change-Id: I2cd3515973d1a70f478cbd68426ec84fd1645d19
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to specify which roles are supported. Broadcaster and
Observer roles are always supported.
Image size reduction for samples apps:
beacon 43148 -> 15196
central 46892 -> 46356
peripheral 47532 -> 45940
Change-Id: If260c13d63651b9b54df5bafc2c412b01dcb1eb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_gatt_subscribe requires setting proper value in the parameters ever
since indication support was introduced.
Change-Id: Ib78dac717874e51e21bc9f8ad10279ba9fe68097
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds gatt-discover-secondary which works as follow:
btshell> gatt-discover-secondary <uuid> [start_handle] [end_handle]
bt: att_find_type (0x00110d18): uuid 0x180f start_handle 0x0001 end_handle 0xffff
Discover pending
btshell> bt: bt_att_recv (0x001134a8): Received ATT code 0x01 len 5
bt: att_error_rsp (0x001134a8): request 0x06 handle 0x0001 error 0x0a
bt: att_find_type_rsp (0x001134a8): err 0x0a
Discover destroy
In addition to this gatt-discover is now renamed to gatt-discover-privary
to avoid any confusion with other discover types.
Change-Id: Iee1fdf3e72269b134e222b4a2c6b4329858e71b0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add discover type to bt_gatt_discover_params to the API is reduced to
just bt_gatt_discover, this should simplify adding support for
discovering secondary and included services.
Change-Id: Iadeed86fed115afee1340b2c09821d7fafdda0f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since atoi is available in libc this implementation can be removed.
Change-Id: I3cbb230916f382e27d59b503618b6291c8f0b691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
All the data shall be sent in little-endian byte order.
Change-Id: I6d4ab0760f92e202ddcb348d30f0d1f208f84f1d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If tinycrypt is compiled in use it for encryption instead of HCI LE
Encrypt command.
Change-Id: I9cf70540f14ed449bfda52c4a0901462b9a60fe9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Some tester commands require to response with current settings.
This patch is needed to properly track the changes in these settings.
Change-Id: Ib9c919e804decbe26ba6ab2a23f1c30d812f98ab
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This application can be used to list the PCI devices through the
console.
Change-Id: I3409ab9025b1f18a42b4cdd594fb095ebeac96f3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove the hard dependencies on EXPERIMENTAL symbol. Mark all the
symbols the relied on EXPERIMENTAL as EXPERIMENTAL in their prompt
Change-Id: I2779b0ed0776b3d510a8e2e44b35b83d7ad2377c
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This avoids the case where the system has multiple threads using
floating point and the threads were not properly configured to use
floating point. The misconfigured threads will only take the fault on
first use of a floating point instruction.
Change-Id: I2be9f9f145bc4e7659e07154021ccc237774897b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default for all architectures for ENHANCED_SECURITY is 'no' now
remove redundant config option.
Change-Id: Ib49b0bc7ea02aa2214fe45194393def8e021be01
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The default for all architecures for ENHANCED_SECURITY is no remove
redundant config from arm project configs
Change-Id: I3915da20e0ee8298d69865ad5b07f9d5c6d59200
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The default for all architecures for ENHANCED_SECURITY is no remove
redundant config from arc project configs
Change-Id: I14257a9f111790d506b106ef184e859b595cd009
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
ENHANCED_SECURITY is being used to enable security options the
projects that require security options explicitly enable these options
the dependency is not required.
Change-Id: Iec96e32bd7a5faa78672d355aad368f48b0ee087
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Change the default for ENHANCED_SECURITY to no in preparation for the
option to be removed.
Change-Id: Ic46730b187f361226064a3e205f48433b0bebdd7
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This macro is legacy from an early implementation of the init system
before the pure level was split into early and late phases remove it
now to avoid confusion going forward.
Change-Id: I6720874c840c9e14888fd6f411a8182e7420ca29
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Sample code for crypto library was duplicated and run twice.
Make the samples/crypto/ directory the contain of the source
and add the test logic and makefiles to the samples/microkernel/tests
referencing the source in samples/crypto.
Change-Id: I74d34de9351642fc4508e6bedd65e9b34676b01e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
minimal footprint disable timer and galileo requires a timer
Change-Id: I75c08775fd02bae1221ae4102bb9873060c8e85f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This introduces a generic driver set for console messages routed over
inter-processor interrupt (IPI) channels. These drivers bind to a
low-level IPI driver instance for the actual transport of messages.
ipi_console_sender installs printk and/or stdout hooks to forward
messages over IPI. There is currently no buffering on the sending side.
ipi_console_receiver installs an IPI callback which stashes incoming
characters into a ring buffer, which is monitored by a nanokernel
fiber. The fiber buffers the characters on a per-line basis and sends
them to either printk or stdout. Multiple instances of this driver
may be created in case you need to receive console data from multiple
CPUs.
Change-Id: Icebc110794fbe040f975101cd2ae6e78fb38645a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This enables passing the value to be used when writing to CCC so it can
be configure for indications in adition to notifications.
Change-Id: Ied89faed422e5c5ec60618d512dbd3f250f50b46
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables bt_gatt_subscribe to subscribe using indication value in
addition to notification.
Change-Id: I25f3b057e36b023a79fb66b11b70716ecc299ba9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This documents describes protocol used by external tester to drive
IUT. Currently initial version includes only Core and GAP services.
Change-Id: I2fcb366076313880116be2ead8916bb56a4b5910
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This big patch refactors tester application and put it in par with
updated tester protocol.
Change-Id: Ib016fdd0aac58a32bcdc67774843cf65d619947d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is a mandatory characteristic for GAP servie. It must be included
in GATT db.
Change-Id: I27c0c6d56f5303c3c5d1606d7656c51823f74989
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Enabling more sanity checks for the ARC architecture is an ongoing
process, disable failing tests for now.
Change-Id: I2fdabf98a5648120649649e3e32b849b79b48a7b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of multiple make options etc. the test are now run
directly from make. User does not need to know various command
line options for setting up pipes.
Change-Id: I62a56aec75c55b970b246051dccdbf458389ab8d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate RX and TX buffer count was not set in example
applications prj files.
Change-Id: If48824e894bced3134391dae651f5997820de2c1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This variable is not used outside of c file.
Change-Id: I89b34fb6dd2cdd9dd111b6e33829f170d0ba00ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds possibility of setting advertise mode.
If no advertising mode is set, use default value (discoverable).
Change-Id: I86456ca52ad54a2fd4e4c6443a79087ddeb99ec6
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Bluetooth shell now supports advertising type set while starting
advertise.
Change-Id: I1e672b4c9315368dcef38398834acc5541c1843b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes shell a bit more convenient to use.
Change-Id: I50490eb3cf9434723737a71fb382316876ba6291
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This commands print list of all available commands.
On unknown command only short info about 'help' command is
printed.
Change-Id: I780f4fd8da7292192260a0e0af8815fe4e385ae2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reduce usage of static variables making code easier to follow.
Also improve robustness in case of too many parameters provided.
Change-Id: I6a3f0162a4fb301479ed36c54ceca2967bb7e389
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If empty input was provided simply reprint prompt instead of printing
uage information. This makes it similar to linux shell.
Change-Id: Ie4d9e1e7cb011ddf14f490188335ddc44289ffcf
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use more robust approach when registering shell callbacks. Instead of
allocating maximum number of callbacks use exact memory which is
needed.
Change-Id: I96db75375e8d24df328adc0622c7817a3328f860
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Have a separate network buffer pool for received and transmitted
data. This way incoming packet flood cannot prevent from sending
IP packets out.
Change-Id: I2aae3bcb4ea63f36355f758de44532b167edfdb8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The CoAP test server runs in Zephyr and it receives CoAP messages
sent by coap client. The server can receive both plain or DTLS
encrypted CoAP messages. The server has various resource plugins
available but currently activates only three that are needed
by coap-client tester.
Change-Id: I6465a3a057eaf8b412699bba57bf7213548f0377
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This callback is called when security level of connection changed.
Change-Id: Ifec130163fffe291cd012c99247017bd31173660
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to define for each descriptor its own read handler.
Each string descriptor will use generic string read handler if
possible.
Change-Id: I468a082c6875400ec4515588131132ef27cc8082
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
When identity is resolved only Identity Address should be used for
identifying connection.
Change-Id: Ic179286b09afced4997a755f1977eea818bc6e54
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The test application name was printed incorrectly.
Change-Id: I1686dd886c26cd94dbf2482fe904bd61e66d4a78
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the nano_fifo_get_wait() API when waiting network packets.
This function will block until there is data in the socket.
The timeout version called nano_fiber_fifo_get_wait_timeout()
is not working at the moment.
Change-Id: I42bddf8921cae0ed3caec8226b6086833534ae65
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
default_conn is assigned only on connected event so there was
no way to cancel pending outgoing connection.
Change-Id: Iba5018e887c5b3f87513fc5c8f4585fb6ec40c8d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to use strncmp for string type arguments terminaded
by NUL character.
Change-Id: Ib90517f4657de8da64f145afd0ac28aefa697026
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
To avoid multiple prints with cmd help one label will be used.
Change-Id: Ieaaffd8b4321fdb2ad2f95894d293ec1d6eb8d10
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Due to bug in test case configuration file tester application
was not build by 'Build Automation'. This application has all
Bluetooth debugs enabled so it is essential for build verification
process.
Change-Id: I51115d17a28614b7746c6d207d4362a94bc0f591
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch separate character to hex character convertion part and
moves related code to helper.
Change-Id: I5c754669583228566e80a9b20a9db0e639641677
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to select more authentication options and reply
to all requests.
Change-Id: I220d945763b9381818c5caad52bf0f5e8b01ab54
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This monitor_15_4 tool is run in the host side. It will connect
to Zephyr via UART using pipes. Test app1 in qemu send data
through the uart and pipe, this tool read data from pipe1
and writes it to pipe2 where test app2 running in qemu2
will read data from it and vice-versa. In between tool store
data in pcap format for further wireshark packet analyzation.
Change-Id: If5c998591edf4253fbd5e249c6c9e48fa1792715
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The dtls-client app will run in Zephyr and will send network
packets to host process (dtls-server) via SLIP.
Change-Id: I51e3424193e6a7169d9921ba56466bb0c0c0d4d1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This options does not exist anymore, no need to carry it
here.
Change-Id: I0bcafe2ff959dbc2e0fcc3f9481b65c43ea64f14
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample builds multiple kernels with different configurations
starting with a minimal kernel that basically does nothing and
adds features one by one to measure the minimal footprint for the
various supported kernel objects and features.
Change-Id: Icba984845dc6f1979d16ba246bdb133cc6e3465c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The event portion of the app_kernel benchmark no longer outputs the following
(abbreviated) error message:
<path to project>/app_kernel/src/event_b.c:86 Error: tick occurred
This error was occurring as the benchmark test had hard-coded the value of
the event TEST_EVENT to 0 instead of defining it in the prj.mdef file.
Consequently, the system was using event 0 for the tick event; every time
task_event_send(TEST_EVENT) was invoked, the system treated it as a tick event.
Change-Id: I1a785a6594415bd4b0300d382f76a6d768641864
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Other apps are being compile-tested, do this here too.
Change-Id: Ibbe9e765757564e974233c1410bac320ae7a8a68
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The profiler now uses the generic ring buffer. The dropped event
count is stored in the ring buffer's value field. The data size only
refers to the extra data attached to the message and NOT any internal
representation of metadata inside the ring buffer, the event_logger
APIs now pass this information along in dedicated parameters.
Change-Id: I1f168e6a05e8d937bf86b2a4cccecbb04b0118c6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch is based on some code contributed by Dirk Brandewie.
This is a generic data structure for queuing data in a FIFO ring
buffer. Any given data enqueued is annotated with an app-specific
type identifier, and small integral value. Use of a data pointer
is optional if the necessary information can be conveyed in the
annotations. We want all the metadata to fit in a single DWORD.
The ring buffer always contains at least one free dword in the
buffer to correctly distinguish between full and empty queues.
Concurrency control is almost nonexistent; depending on usage,
apps may want to introduce the usage of semaphores and/or mutexes
to preserve the integrity of the ring buffer or provide notifications
when data is available.
Change-Id: I860262d2afc96db4476d4c695a92f7da355ab732
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add interrupt and sleep event data to the profiler sample.
Change-Id: Ie5d3c4201475824eaf833bef506140279a6c606d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Removed the term _node from the document as requested.
Change-Id: I11e7f9fb217d6cc1026e81fb4702fa534de53874
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
CONF_FILE was dropped leaving samples build with
default options.
Change-Id: Id1a3cb06f43052fb74ed9edcc2ea275b44d2b6b4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make these public:
- SECONDS(x): macro that gives the number of ticks in x seconds
- MSEC(x): macro that gives the number of ticks in x milliseconds
- MSEC_PER_SEC: number of milliseconds per second
- USEC_PER_MSEC: number of microseconds per millisecond
Change-Id: Ic5dbf9349651a477b066edb0c6b6721da2b7e5bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The term 'context' is vague and overloaded. Its usage for 'an execution
context' is now referred as such, in both comments and some APIs' names.
When the execution context can only be a fiber or a task (i.e. not an
ISR), it is referred to as a 'thread', again in comments and everywhere
in the code.
APIs that had their names changed:
- nano_context_id_t is now nano_thread_id_t
- context_self_get() is now sys_thread_self_get()
- context_type_get() is now sys_execution_context_type_get()
- context_custom_data_set/get() are now
sys_thread_custom_data_set/get()
The 'context' prefix namespace does not have to be reserved by the
kernel anymore.
The Context Control Structure (CCS) data structure is now the Thread
Control Structure (TCS):
- struct ccs is now struct tcs
- tCCS is now tTCS
Change-Id: I7526a76c5b01e7c86333078e2d2e77c9feef5364
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The comment did not convey anything, as it was a relic from before a
previous renaming. Use the SECONDS(x) macro to make everything clearer.
Change-Id: Ia757061c4083d7567df5b214326c2cf8b6804fbf
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is just a cosmetic change to unify anything interrupt related
under 'irq'.
Change-Id: Ib8804d194e11eb49526fda952d9efc0f2ffac2df
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Previously, CONFIG_PRINTK being false means none of functions related to
the UART console and serial are compiled into the binary. This
effectively means UART console and serial drivers are disabled.
By decoupling serial drivers from console related configs, additional
options are needed to disable serial drivers and UART console driver
itself. So add those options here to disable UART console and serial,
or else the resulting binaries will be too bloated.
Change-Id: If526e42404f22caf6a550795f8277ba742625883
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This restructures the device structs and now utilizes the new
driver initialization model. This is another step towards
converting the serial driver to the new driver model.
Note that the serial driver does not initialize the hardware
unless it is being used by another driver. The configuration
of the serial port needs to be done by the driver utilizing
the port (e.g. baud rate, interrupt priority, etc.).
Therefore, some serial ports are declared but not exactly
configured.
Also note that the UART console is being initialized at
the same time as the serial port. This will be removed
in future patch, so the UART console driver will do
its own initialization.
Change-Id: Idd89954b2d0649a557ba8c869ee96512fec898e4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
... instead of an array index to a global array. This is
an intermediate step to make the drivers conform to
the new driver model.
This only changes from using a direct array index to using
device structs. The UARTs are still staticlly defined.
Later patches will make the drivers utilize the driver
initialization procedure specified by the driver model.
Change-Id: I18041bbb4b0efdf8ae87088fd000b391d0827e9b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The test was doing some weird dance for computing the time the main task
had slept, context switching between the main task and a helper task.
The tick timestamp that marks the start of the sleep duration, which
should be taken before the main task goes to sleep actually was taken
after it went to sleep, by the helper task. This lead to weird results
sometimes on QEMU, where the main task would report that it had slept
for less time than requested.
Now instead, the main task takes its own tick timestamps, just before it
goes to sleep and right when it awakens.
The helper task takes a timestamp as well, to verify that it did do busy
work while the main task was sleeping. However, some error is allowed
there to compensate for some QEMU weirdness.
Change-Id: I4b642b49de8346be404000698eaa4ded070d4097
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The build system is actually using the output directory
as the working dir for the Make session, using a symlink
to the source directory. Relative paths don't work correctly,
it only works now due to other issues in the build system
where absolute paths are being used instead for app source
files (causing other problems).
Change-Id: I2bcd82314692902f12da51c96fe912efb68bdc5e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of using a relative path in an #include, use a real -I path
in CFLAGS. This is still a hack, what we really need is support in
the build system for generating static libraries.
Change-Id: I7bc9aba3bcb7ec65f6a6119c3b2c6efc1de67e58
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Bluetooth shell now supports Signed Write if CSRK key is present.
Change-Id: I035a0d314da4997105c64da58cf85bd95fdbaa5b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for signed write with sign parameter for write without
response.
Change-Id: I79008532d88b10d34db1f68898ad4258dd3e761b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This allows to register pairing callbacks that will display passkey
in case of authenticated pairing.
Change-Id: I18422193785fdcd8a2e567adeb65199bfadcdd1f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The DTLS server is running in Zephyr and is listening on port 4242
and when it receives DTLS UDP packet, it will reverse the data and
send it back to the caller.
Use the dtls-client application running in host to connect to
the dtls-server.
Change-Id: I3306cb242498019ffc9e0519b06061c36db96f78
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make stack size the same size as in hello app. Current stack cannot
handle correctly security tests.
Change-Id: I5946c6bbcbc5079cefefddbb229b3205364b24d0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds gatt-write-without-response which can be used as following:
btshell> gatt-write-without-response <handle> <data>
bt: bt_gatt_write_without_response (0x0010f0a0): handle 0x0011 length 1
Write Complete (err 0)
Change-Id: Ide166049cf53e691a2269778bca1489f7027621f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now uses net_receive() with a proper timeout. Removed also
extra waits when sending data. Removed extra semaphores
and streamlined the code to act as fast as possible.
Change-Id: I577d4d5ff85bf13400fb6e157bc0023267658ba4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-client app will run in Zephyr and will send network
packets to host process (echo-server) via SLIP.
Change-Id: Icaf941ce883aec82136ef909db67e43ab6b981f7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must not touch uip_len(buf) value as Contiki IP stack
will use it to determine what it should do with the
received packet. So after we have received the packet,
we update separate datalen variable in net_buf that will
store the correct length of the packet.
Change-Id: Iab79b741508e95e581d1727645e6b1d1eacded4c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to specify a timeout in ticks while waiting
network data. The timeout value has following meaning:
TICKS_UNLIMITED wait forever
TICKS_NONE do not wait
value > 0 timeout value (only applicaple if
CONFIG_NANO_TIMEOUTS is defined)
Change-Id: Icbb33fa0eeb462659d4006dd9d948a04f39a87a9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds offset to gatt-write which can be used as following:
btshell> gatt-write 0011 0001 01
bt: gatt_prepare_write (0x0010f680): handle 0x0011 offset 1 len 1
Write pending
btshell> bt: bt_att_recv (0x00111918): Received ATT code 0x17 len 6
bt: att_handle_prepare_write_rsp (0x00111918):
bt: att_prepare_write_rsp (0x00111918): err 0x00
bt: gatt_exec_write (0x00111918):
bt: bt_att_recv (0x00111918): Received ATT code 0x19 len 1
bt: att_handle_exec_write_rsp (0x00111918):
bt: att_write_rsp (0x00111918): err 0x00
Write complete: err 0
Change-Id: I4d3c038ea572da92efe0de8ce426ffca15506440
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables writing from offset using Prepare Write + Execute Write
procedures including Long Write procedure when the data is bigger than
the MTU.
Change-Id: Id35d66c011ba582a4ba92ffe75444226e479335a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sample project README.txt files are supposed to follow a particular format
AND have a "Sample Output:" section.
Change-Id: I91fff1057e56bc222ab82d680018a673e19e479d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Assigns more descriptive titles to the sample project README.txt files.
Change-Id: I4a0efdac481a8ed75a847871dbfe686e74a9f113
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardize README.txt files on using "Sample Output:".
Change-Id: I3a8dc18b37f36067b9f343ef443b6d35e85db6b4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardize on using the irq_lock/irq_unlock (non-inline) symbols
everywhere.
The non-inline versions provide absolutely no benefits, so they will be
removed in a subsequent commit, and the inline versions will have their
_inline suffix removed.
Change-Id: Ib0b55f450447366468723e065a60adbadf7067a9
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Basically, this does not work anymore:
task_timer_start(<timer>, 0, X, <sem>);
since it does not make much sense to have a timer with an expiry of 0
ticks. The code internally was setting the duration to be equal to the
period anyway. So, to achieve the same behaviour, do this:
task_timer_start(<timer>, X, X, <sem>);
This has the positive side-effect of removing a small block of logic
that was handling the cases where duration was 0.
Change-Id: Ic4af4a17a129f14af4fea445bcaddabe89c27131
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Reflect the fact that they are not used.
Change-Id: I6ea83cb2c7532e10988cbf4350edccb78f444328
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Align with the newer terminology used for microkernel internal symbols.
Change-Id: I623b383f90d9e37a49429a79774c7f7a4953bd5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
irq_handler_set, irq_priority_set and irq_disconnect have been made
private by prepending an underscore to their names:
irq_handler_set -> irq_handler_set
irq_priority_set -> irq_priority_set
irq_disconnect -> irq_disconnect
The prototypes have been removed from header files when possible, and
extern statements used in C code where they were called.
_irq_priority_set() for ARM is still in the header file because
IRQ_CONFIG() relies on it.
Change-Id: I2ad585f8156ff80250f6d9eeca4a249a4477fd9d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Doing those checks went against the Zephyr philosophy of no error
checking unless absolutely necessary. Users should ensure themselves the
validity of their inputs to kernel APIs.
Change-Id: I21e5cd07ff9424ad61e81fd9d52ceef0c9584a8c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_event_set_handler -> task_event_handler_set
Align with the "verb at the end" convention.
Change-Id: I8b72d41a20a7fdd4756f90765682e317289a241b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_pipe_put_async -> task_pipe_block_put
task_mbox_put_async -> task_mbox_block_put
task_mbox_data_get_async_block -> task_mbox_data_block_get
task_mbox_data_get_async_block_wait -> task_mbox_data_block_get_wait
task_mbox_data_get_async_block_wait_timeout ->
task_mbox_data_block_get_wait_timeout
Previous names, focusing on 'async', were misleading, because:
- some of those APIs can be used synchronously as well
- other APIs can also do asynchronous transfer, and don't have 'async'
in their names
- the key concept of these APIs is that they use memory pool blocks
rather than raw data buffers.
Change-Id: I0c08a6cf950ab23bb4172ce25eb6f9886b037649
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add a project that shows how to collect the
data from the profiler.
Change-Id: Ie9cc88290de594720739b30d4e872fe51d353f6e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
leftovers from the renaming activities:
nano_node_tick_get_32 -> nano_tick_get_32
Change-Id: Ic9f0870ddda159311005c2ed16e0a378ab9a6a62
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The PIT is an unsupported device. On x86 based platforms, the LOAPIC_TIMER and
HPET_TIMER are the only supported timers.
Change-Id: Ic890838c811b7eb62008aef0c8a92786f1579217
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the LOAPIC timer macros from board.h as they are no longer required
since appropriate Kconfig options exist to use in their stead.
Change-Id: Id0b509eba7cce1839b400f95b989bf886322e1a8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As no default platform configuration uses the PIC/PIT, the project
configuration file 'prj_console_pc8253.conf' is no longer required.
Change-Id: Ic91922e9431a2853bb5fdcdd3e31e39f3dce90c4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As no default platform configuration uses the PIC/PIT, the project
configuration file 'prj_pc8253.conf' is no longer required.
Change-Id: I89fac2685d9fca0452e5ce9d9b035e102bd62d70
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the following project configuration files:
- prj_console_float_pc8253.conf : PIT is no longer used
- prj_console_nofloat_*.conf : unsupported by Makefile
Change-Id: I72689fa56413947f3a552645c7b2ed5ad599ed71
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the HPET timer macros from board.h and uses the HPET timer Kconfig
options in their stead.
Change-Id: Ia0b3cd87716277ac25f12deb31d5c5934f355050
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This adds unit test for microkernel private memory maps.
The code piggybacks to the public memory map test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private memory maps test move the memory maps inside
source code. So, both mdef files will need to be updated at
the same time.
Change-Id: Ia7f65f55b61d9fb0d42ba58d63662e914d69194e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private pipes.
The code piggybacks to the public pipe test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private pipes test move the pipes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I6fdb5eab7c3a1d6f4b72c26a3620cee0188b07a5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private tasks.
The code piggybacks to the public task test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private tasks test move the tasks inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I2890f70be460c0e45208ce03d6e7897d2662f6f0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private mailboxes.
The code piggybacks to the public mailbox test (by
including the same source files), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private mailboxes test move the mailboxes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I52ccc5931b1abfd3ae3d654f888d4a019268bba0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private FIFOs.
The code piggybacks to the public FIFOs tests (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private FIFOs test move some of the FIFOs
inside source code.
Change-Id: I4130ac540b10a31cd30f37890e9cc389af73e89b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private semaphores.
The code piggybacks to the public semaphores tests (by
including the same source files), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private semaphores test move some of the semaphores
inside source code.
Change-Id: Ic318bf6808514c5d335a46cb3e88ebf6000f4c3e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enhances the existing microkernel mutex test project to verify
that recursive mutex locking works properly. The implementation
utilizes the new in-file defined mutexes to demonstrate that
this capability also works.
[DL: Update the original patch from Allan Stephens
@ https://oic-review.01.org/gerrit/3256 to utilize
the new interface. Also updated the commit message. ]
Change-Id: Iaf8b4a5cd97d1dce53d6134a978cc565279d038c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Some devices (eg. Android KitKat) are confused if remote database
is empty.
Change-Id: Ie27920b6f64b12903917068101d5abb171ab42c0
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
If bt_gatt_subscribe -EALREADY that means it is already subscribed and
shall not be reused.
Change-Id: I83c620454c40863c71b1289d37c2b42571a907fd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the peripheral sample app use the async feature of bt_enable() to
verify that it works as expected.
Change-Id: I15f7758944a8c34d1aaef84f0ba77a6b5bbb4695
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to be able to perform the init procedure asynchronously
through a callback. The RX fiber is a good candidate to use for the
callback since it's not active in its normal operation before
drv->open has been called. In order to prepare for a future
bt_disable() API the init API is renamed from bt_init() to
bt_enable(). If a NULL pointer is given as the callback the API
behaves synchronously like the old bt_init().
Change-Id: I4e78fa8f32dcf5477ea05a8db75aca5cdce591fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Attribute length can be up to 512 bytes long so it needs to be at least
uint16_t, ATT already takes care that the MTU does not exceed 512 bytes.
Change-Id: I6c8dc80a4b63f212420c26c0a24d93939fa510fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
echo-server can now receive both unicast and multicast UDP
messages.
Change-Id: I3837b8e7126584fa7c87958e68a8439824abd5ab
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes the central sample discover the attributes and subscribe
to receive notifications of HeartRate Measurement Characteristic.
Change-Id: Icedbdd759638be0b8fa8515112208aa61ad5eb90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes central sample to parse the Advertising Data and in case the
device supports HeartRate Service stop scanning and connect to it, if the
device disconnects then start scanning again.
Change-Id: I49962eadb5c82c7a910185212063cd576cadf62e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will be needed to monitor connections with peripherals.
Change-Id: Iccea2696af72b0b8b3f40aac180738dc6b80abc8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With this patch advertising state and scanning state are stored as flags.
Change-Id: I5d2dc37972620ee89aaf55d45e294e8be82863d3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds gatt-unsubscribe which works as follow:
btshell> gatt-unsubscribe <CCC handle>
bt: gatt_write_ccc (0x0010edc8): handle 0x0015 value 0x0000
Unsubscribe success
Change-Id: I812fd237f71c4cad8e188015f1cd4cd2f2902aa6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Once connected store the bt_conn as context, this save the trouble of
entering the same parameter over and over and remove the lookups from
commands that requires a connection.
Change-Id: I9671b8fa07a1a61db45516f63eb007f19f0e59a1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change-Id: I50f0f4548fdf5c79c783f4055974e427ba9cbfe8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes references to obsolete BSP terminology from the sample projects and
replaces it with references to platforms where appropriate.
Change-Id: I6c8071a84f77c2cfe1458e3891d2b5e5afdaf8f9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes reference to the unsupported "-T <toolchain>" option and the replaces
the deprecated "-B <BSP>" option with "-P <platform>".
Change-Id: I21ab863dded9cbfd4fc0ab2fcade59137add08cf
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes README.txt for nanokernel's test_xip to refer to the nanokernel instead
of the microkernel.
Change-Id: I03866e88ec67515b827b901d49b1e7b10d3866d0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes a couple of references to obsolete resource terminology; they now refer
to mutexes.
Change-Id: Ie7f837b6657891bdde9b09bb0ff2311fe4c19928
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It appears more conventional to require callers of function-type
macros to supply the trailing semicolon.
Change-Id: I40c67cf2ec8f7e85bdc9d8a2a29698b56d9715c6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds to btshell app a command to enable mimic GATT client to
perform multiple read attributes request using set of input handles.
The syntax is: gatt-read-multiple <address> <addres-type> <h1> <h2> ...
Handles should be entered as hex values and are 2-octets wide each.
Change-Id: Ic37a4486a11c645685cbfc782d36457af0fe9453
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Allows shell commands read more number of input parameters.
It is updated to 10 input parameters.
Change-Id: Ia943e8c6f0caaaf74cebcdb9dbe3542d90b2e4b9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This function operates on bt_conn so it should be in conn.c and
exported through conn.h. Rename it with the appropriate bt_conn_*
prefix.
Change-Id: Id17c67f0e95cc1afb10aa7742b2d2ce0110ea616
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_disconnect deals with the bt_conn object and should therefore
reside in conn.c and be exported through conn.h. It should also have
the appropriate bt_conn_* prefix.
Change-Id: I75eb648fd9aa8ced9a991d472c319d25f4b772af
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update test_15_4 makefile and prj files to support
CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART build.
Change-Id: I8247b67b1beac18f7c62349d049694cf5aa437ca
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Removes references to old platform names.
Change-Id: I65baa148006fbda916904914844b1b347f8ec654
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to old platform names.
Change-Id: I53e9994c794c6b4c292e776355a67b7923c2fdb8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses PLATFORM_CONFIG to specify the configuration file instead of
KBUILD_DEFCONFIG. This name is more intuitive to Zephyr users and
it is not tied to kbuild.
Example usage:
make PLATFORM_CONFIG=generic_pc_atom_n28xx
make PLATFORM_CONFIG=generic_pc_minuteia
make PLATFORM_CONFIG=quark
make PLATFORM_CONFIG=ti_lm3s6965
make PLATFORM_CONFIG=fsl_frdm_k64f
Change-Id: I177608942c3e77c2f152743c862aad1d460c0e33
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The generic_pc and generic_pc_pentium4 platform configurations are not
essential configurations to Zephyr.
Change-Id: Idd384bc7f180c035b1467e8b56fbfe206604658f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes default KBUILD_DEFCONFIG to xxx_generic_pc_atom_n28xx_defconfig as
the xxx_generic_pc_defconfig configuration will not be supported in the future.
Note that like generic_pc, atom_n28xx runs on QEMU.
Change-Id: I49c5708e4b24dbf723eefc1efddfea4174d9cb1c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Network sample projects no use KBUILD_DEFCONFIG instead of BSP. This
is a necessary step in transitioning from BSPs to platforms.
Change-Id: Ia1ebb697d9e68974f71faa467f1f946f0d1afbd1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Nanokernel smaple projects now use KBUILD_DEFCONFIG instead of BSP. This
is a necessary step in transitioning from BSPs to platforms.
Change-Id: I47f75742b663edd7c4b1858425d4583f0bc74ae7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Microkernel sample projects now use KBUILD_DEFCONFIG instead of BSP. This
is a necessary step in transitioning from BSPs to platforms.
Change-Id: I916819262cabf70296e15d9b1321fc383b88a805
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Bluetooth sample projects now use KBUILD_DEFCONFIG instead of BSP. This is
a necessary step in transitioning from BSPs to platforms.
Change-Id: I42c89d0b5c3d7de7ea62297950bb00f56ca97ed2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Revises the memory pool test project so that the maximum block size
is a power of 4 multiple of the minimum block size, as a reminder
of the required relationship between minimum and maximum block sizes.
Change-Id: Iff5480b7870c261d43c5a857c71a44beffc6c7f0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There is no need to refer to a data passing microkernel object
as a 'channel'.
Change-Id: I730f88d6e77ab075832e7ed48b20eb2ec46b5ed4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change the function signature of _InitHarware() function and rename
the function to a platform specific name now that it will be called
via a function pointer and not by name.
Call the platform *_init() function at PURE_INIT time.
Change-Id: I5168dfea81f406da135d491a2b4a24e8255f418a
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The nanokernel routine nano_time_init() is automatically invoked by the
constructor initialization code, and should be invisible to the application.
Change-Id: Ic75f84856c333187a4f9fef8569698e056f6d936
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of aaaa::/64 address space which is part of global
IPv6 address space, use the 2001:db8::/32 which is meant
for documentation purposes and is not routable.
Change-Id: I56db34da852f8c313379c764bdf75a19151c45bd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows to enable advertising with some fixed Advertising Data
and Scan Reponse.
Change-Id: Ie3a33a49fe8517c9e931b7805694bd9c7b05fcdb
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
The listening socket was creted after we started to send data
so data was discarded. Now we first create listener and then
start to send data to it.
Change-Id: Iee706c7c862d16a582ee973b10598dde5e5f0bd0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
set_mac was removed in net_set_mac is in init_test(). Rebase was
not done successfully.
Change-Id: I0d1a2f37cdb441064ae97a0e34ae41e9c7e77984
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Set the MAC address so that the stack can generate a link
local address and mark internal variables as static to avoid
namespace pollution.
Change-Id: Ic8447054629fcdd5f7e1f8b8c5e2bb477bd63809
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo server is listening on port 4242 and when it receives
UDP packet, it will reverse the data and send it back to the
caller. This can be used to verify that the IP stack is doing
something useful.
Change-Id: Ibbc48c21f2513d59480c5a3bb34c775eb3df8170
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds gatt-exchange-mtu which works as follow:
btshell> gatt-exchange-mtu <bdaddr> <bdaddr_type>
bt: bt_gatt_exchange_mtu (0x0010c138): Client MTU 65
Exchange pending
btshell> bt: bt_att_recv (0x0010e310): Received ATT code 0x03 len 3
bt: att_mtu_rsp (0x0010e310): Server MTU 517
Exchange successful
Change-Id: I7280fb9d9fafc0f4bd1ef0f2226c255a5acf2592
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to use shell since one can copy full address
from console output. Both variants with and without braces are
accepted.
btshell> connect 7C:2F:80:94:97:39 (public)
Connection pending
btshell> Connected: 7C:2F:80:94:97:39 (public)
btshell> disconnect 7C:2F:80:94:97:39 public
btshell> Disconnected: 7C:2F:80:94:97:39 (public)
Change-Id: Ic10386ee054ade1900e5f010857c0f85e5cb364a
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous comment style used RETRURNS:, use @return to comply
with javadoc style.
Change-Id: Ib1dffd92da1d97d60063ec5309b08049828f6661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some comments have \param, convert them to javadoc style.
Change-Id: I6abcdab91f4f616632392292600f4b0081b2a842
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enables make outgoing connection with error handling.
Free connection objects maintained in polls are assigned to active
connection by result of lookup on the polls based on input
peer LE address.
Updates shell application to reflect above changes in stack.
Change-Id: Ibc71343c0d122cc78c48bac2ff1e50533369b7d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Notifications will be sent on connected/disconnected events.
Change-Id: Iaac6851a987a630ce41c5836de49dccc6ee5d385
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for enabling advertising on DUT. For now
setting custom advertising data or scan response is not supported.
Change-Id: I506d944565e524eb2103949df6cf003347d4c117
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Also rename bt_conn_security function to bt_security and
bt_conn_security_t to bt__security_t.
Change-Id: I543c7b97241c4389ef0eb491b6869f93105ae533
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This allows to elevate security of a connection.
Change-Id: I492a92026c8db6feccffb96334be4557a5c73b48
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This way the stack will generate a proper IPv6 link local
address.
Change-Id: I149d82cf5623f3073b9edc64fe4e426460eb793b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mac address length needs to be 6 bytes because this
test app has no 802.15.4 support. The uIP stack checks
this and expects only 6 bytes mac address in this case.
Change-Id: I1edd340491b4690b5a2cf285c63f90950bbc3ff3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Stress test the IP stack by always sending max number of bytes.
Change-Id: I830a92cca4efbc2aa00dd1bec75972884359621c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test_15_4 test application now works with microkernel also.
Change-Id: I041a917be599936089af9ffaba9c27b9aeb5a481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enable 802.15.4 driver that receives the IPv6 packet, does header
compression on it and writes it to the 15.4 stack Tx FIFO.
The 15.4 Tx fiber will pick up the header compressed IPv6
6LoWPAN packet and fragment it into suitable chunks ready
to be sent to the 15.4 hw driver. The 15.4 stack Rx fiber picks
15.4 frames from 15.4 Rx FIFO (which are fed by 15.4 driver)
and reassembles the all fragmented packets and uncompress the
header and writes to the IP Rx FIFO.
The 15.4 loopback radio driver receives the 15.4 frames and
put it back to 15.4 Rx Fifo.
Change-Id: I68d1c7ff6de0e8770616e574206c2091c69a28e6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the loopback IPv6 address and an all-zero MAC address as the
loopback device really does not have a defined MAC address.
Clean up the code so that the loopback driver's IPv6 addresses are
not reused in other parts by mistake.
Change-Id: I07cc8bc5ad3a2ec5997bb313dd0ecaca4d9742f7
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that bt_conn is public using it directly is much more convenient
and in some cases save a lookup by address.
Change-Id: Ia489948634984fe4f1a430da553f8a2a740fb531
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The sample should be under microkernel and not in the
top level samples directory.
Change-Id: Ide98fa64a5a6831f83bec25b778f9d5b39bdb4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The new name better reflects that this file contains all private
nanokernel APIs that are used by various kernel subsystems.
Change-Id: I4c258d582e93753eec9e575fdb5f9f2109417a0f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Makes name more consistent with other CPU_CORTEX_M* options.
Change-Id: I65968cb300207ba0de6231d9a67f2720be77b6ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CPU_CORTEX_M3_M4 replaces CPU_CORTEXM3 as the umbrella option for Cortex M3/M4
processors.
NOTE: Selecting CPU_CORTEXM4 still currently forces the selection of
CPU_CORTEXM3. Breaking that forced select will be done in a later commit.
Change-Id: I0f36b3a2adc5c6c66db4e9b6353b921199544deb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds new commands to shell app allowing turn on/off active LE scan.
App uses scan results callback to get feedback when found any
advertisers around.
The dummy app's callback prints out info about findings.
Change-Id: Ifffe77b804230c19bbbcbc4f38e47210c835106d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables sending LE discovery results to user app.
Updates central apps to use new scan API.
Change-Id: Id319c96e15554f2eed4cf507cddd114ca74aa8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Return code from command handler is not needed and was already ignored.
Change-Id: Ief073ccfe2ccd316b6d4eec5168fb564e96786ee
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This makes code looks similar to POSIX style parameter handling.
Also code is easier to read and doesn't require tricks like
'p += strlen(p) + 1' for next parameter.
Change-Id: I013e714ba81681da38e320fb69851c7b5a75bb52
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Adds above commands to the shell app.
Connection is made based on given address and type eg:
btshell> connect 00:00:00:00:00:00 public
In callback we get local connection id which is in fact,
the number of array entry in which the pointer to the corresponding
bt_conn has been written.
To disconnect, just provide the id eg:
btshell> disconnect 0
Change-Id: I24f7ec2de7f84c53ab847ded28a1821753c2a60d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There's no clear need for this API (at least for now) and supporting
it means we really need to get all state cleanup procedures correct.
Remove it for now.
Change-Id: Ia2c7d51d410117bef12bc08f4f97a4e38ccfb77a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it clearer that this is a specialized API not intended for
general app usage (unlike most other things in bluetooth.h).
Change-Id: I0ce1d5903610a9b3a99cf0be9f0e1462b04bf45a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Always prefix UUIDS for characteristics with service name.
Change-Id: Ic435fa725e6bc8918af631632156b071121cd0e0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated."
Change-Id: I585a9f84e8239a59b0f5b29eed0dc70efa253522
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Now that we have a publicly exposed connection object it makes sense
to pass that to the connection callbacks rather than an address.
Change-Id: I8e9b17733d1789539a83c3dbc7a778336d2b71ff
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For consistency, when including public header files, use <> rather
than "".
Change-Id: Id780388759c33d865f49c9e0faf9cde2251ca869
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This one should be used for all public connection related APIs. Right
now it includes the reference counting and connection callback APIs.
Change-Id: Ib9b67e6115bb2e51322644757da1170851c3ca17
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fix a build issue after last rename of TIMO -> ZEPHYR in build
system variables.
Change-Id: Iba9fb2ae13df0c66c7c1031b3a27795a9ead0e97
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Simple tests to verify whether the microkernel timer system works
alongside the nanokernel timeouts and timers system.
Once the timer test is started, the nanokernel fifo timeout test is
started in parallel: each other's timeout times should not be affected
by the other. Also, a fiber is started, pending on a nanokernel timer,
and awakens in the middle of the microkernel timers expiring.
Change-Id: I05b307e58ac942961a4163cbe845a9bb732ecfb7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test the nano_xxx_fifo_wait_timeout() APIs.
First, the task waits with a timeout and times out. Then it wait with a
timeout, but gets the data in time.
Then, multiple timeout tests are done for the fibers, to test the ordering
of queueing/dequeueing when timeout occurs, first on one fifo, then on
multiple fifos.
Finally, multiple fibers pend on one fifo, and they all get the
data in time, except the last one: this tests that the timeout is
recomputed correctly when timeouts are aborted.
NOTE: The timeout APIs test is contained within its own file so that it
is easily reusable by a microkernel test that verifies that nano
timeouts and microkernel timers can coexist.
Change-Id: I5aae2d89651914fb6c39d8d09a56c7fa54533453
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test the nano_xxx_lifo_wait_timeout() APIs.
First, the task waits with a timeout and times out. Then it wait with a
timeout, but gets the data in time.
Then, multiple timeout tests are done for the fibers, to test the ordering
of queueing/dequeueing when timeout occurs, first on one lifo, then on
multiple lifos.
Finally, multiple fibers pend on one lifo, and they all get the
data in time, except the last one: this tests that the timeout is
recomputed correctly when timeouts are aborted.
Change-Id: Ida951fda746539253b9a165f48be6931d6bee05c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test the nano_xxx_sem_wait_timeout() APIs.
First, the task waits with a timeout and times out. Then it wait with a
timeout, but gets the semaphore in time.
Then, multiple timeout tests are done for the fibers, to test the
ordering of queueing/dequeueing when timeout occurs, first on one
semaphore, then on multiple semaphores.
Finally, multiple fibers pend on one semaphore, and they all get the
semaphore in time, except the last one: this tests that the timeout is
recomputed correctly when timeouts are aborted.
Change-Id: I73c174e6f15f38377a14573cb7f531e5e6ca4c07
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The test verifies that delayed fibers are started in the right order,
and that cancelling delayed fibers recomputes correctly the timeouts in
the queue. Also test the fiber_sleep() API.
Change-Id: Ic3169a90b434a81c96e7c5d3c74c39431c988f39
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Moves the Bluetooth regression script 'bt_regression.sh' so that it resides
in the same directory as the other sanity scripts. It also renames it to
'bt_regression_chk' so that its name is consistent with the other sanity
scripts.
Change-Id: Ia5a683e2c370c91a90edc648634ce56e484dcc20
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
KLIB_DIR builds are a relic from the previous build system.
Change-Id: I382db45f0a21786e1b7c50c9a881c82feb2c7481
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit set back .S as the assembly code extension for Kbuild.
Change-Id: Ib0119876bd0bed6617bbfbad2ca6a44e172ab042
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I1041b982492ea7b76213e3b57cf28a9f17e7fd9d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates confusing references to "channel", and improves
readability of project output.
Change-Id: Ib4f699caae5a015832207a408bd168903e791756
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new build system no longer uses this directory, since it rebuilds
the (minimal) standard C library every time a project is built.
Change-Id: I1ca6b949bfa260f1d262276be653ddd6bd1cc53b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The source is included to the manual and putting more comments helps
to understand the code.
Change-Id: Iefd6db2abf6070fd8c3fabdaf4946bdd7a045544
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes compile errors:
...
Makefile:36: /make/env/defs.base: No such file or directory
Makefile:47: /target/make.ukernel: No such file or directory
make: *** No rule to make target '/target/make.ukernel'. Stop.
...
Change-Id: I693a939510b732ac810d5af756422c58e3f0c3ab
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix typo and reformat test to make it more logic and reflecting
doxygen documentation.
Change-Id: Id869f0131132c9287eab71d11ae40d194a20ca20
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This application is intended for automated testing. It used binary
protocol for communication over UART and can be used for driving
Bluetooth stack by external tester.
Currently only single command registering (init) GAP service is
implemented.
Change-Id: I62e151baa2badc0f1297e65591b5f494ff7b841e
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
LD microkernel.elf
samples/bluetooth/peripheral/src/built-in.o: In function
`mainloop':
samples/bluetooth/peripheral/src/main.c:514: undefined reference
to `sys_rand32_get'
collect2: error: ld returned 1 exit status
Change-Id: Idec91d59fd98ec06f5e5728238cf9d9f6c37eb87
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Add battery level simulation decrementing from 100% by one every
second.
Change-Id: Ic6b819c32b42d65a044223f22e301835510823a4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Manufacturer Name String in DIS is a mandatory feature for Heart Rate
profile as specified by HEART RATE PROFILE Spec.
Change-Id: I552b51b68012edfc4389604e91dd43b8b54fe65f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Heart Rate simulation using 1 second sleeping loop and this is how
it is recommended in the Heart Rate Service Spec.
Change-Id: I1023a4089bc661a399acf865f4fc7afaf72b8f0f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This registers two simple callbacks for connection and
disconnection events.
Change-Id: I9e1f87d9e1a3c8ef457e15a1c30396fba7f7df4a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
After quark UART configuration was refactored it is not working
anymore. Since quark was never an officially supported target just
remove it from the regression tests.
Change-Id: If4bae99f5e0dfecfd3729ac0c42d7fd3d8affa0c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement Current Time write callback.
Change-Id: I2a6cb0b411c47e4d20ff34eadf8725bf23b0b7b9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This field can be used to set the required permissions for an attribute
which can be checked by Bluetooth core before calling the callback.
Change-Id: Idcab8cdc5744358fab0b3c67b9c0503f1d1d9736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Device Information Service along with model characteristics and
descriptor to the database table.
Change-Id: I28775cf48abe76d0a841ebc92e1579e2d4cdfa09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses BT_GATT_CCC to declare CCC descriptors which makes the core
to managed the CCC configuration so the task don't have to do it.
Change-Id: Ied4fc7eaa1f9f3e6c23d4d5b20d5c26d606f93f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To implement CCC properly it is required to know the remote address since
it is per client, futhermore bt_gatt_notify requires an address where to
send the notification.
Change-Id: I9d9fdf72d668831bed76e2aef06816af3620f4b8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds write callback to CCC descriptors storing the value in a stack
variable.
Change-Id: I8cd2567c6fee730500b446192b73fc82d86ba1ff
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Notify property and Current Characteristic Configuration to Current
Time Service in peripheral app.
Change-Id: I44f36eea4f129c7b407b045da892f2ba88338592
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Current Time Service currently providing hardcoded time since
there is no way of getting current time in the OS.
Change-Id: I9954d51f77905230a6dd180f37d3a48f379c69ec
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Updates references to this environment variable, which were missed
during previous renamings.
Change-Id: I1126271ce8b84d3eaedeab11198d3a3b645393af
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the build system now supports only one toolchain, the
VXMICRO_TOOL environment variable is obsolete. The sanity
check scripts that reference this symbol are revised accordingly.
(Note: As a temporary measure, the main sanity check script
continues to accept the -T option; however, the option has no
effect.)
Change-Id: I383b128b9f5b07164abb7ddeb5a699d819a20316
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The file extension indicates a "Microkernel DEFinitions" file,
and no longer reflects the obsolete VxMicro/Viper branding.
Change-Id: Ib95b271404a4a4737e851d603c371244fa609e4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates references to the obsolete OS name. In most cases the name
is simply removed, as it isn't necessary.
Change-Id: I3796f2aebe802f8c6045b7424a3e7aab4d5fb8e8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of obsolete OS name, which isn't really necessary anyway.
Change-Id: Ic25b3addd43c84a75dacd6c61fdcc7a53217d320
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This warning isn't relevant to Zephyr OS.
Change-Id: I8a115dec61c0c325e5b09337cd3a785fb0f5c75b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The ENDGROUP symbol isn't needed as it is identical in nature to
ENDLIST. The EMPTYID symbol isn't referenced anywhere (or described).
Change-Id: Ic2ba115ee6cde65fa5e57f8607ffa95979ba5f5a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Several files were not explicitly including APIs that they reference,
which could eventually lead to trouble.
Change-Id: Ib33cadfa658280df3fcb4c670463d41b63097b31
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of this non-standard terminology, and spells out
"microkernel" in full (when needed at all).
Change-Id: Ibfae84225fdceb526d8732bc23a0885f2d3be462
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes the instruction directing users to issue "make pristine"
before building a sample project, as this should be unnecessary
under normal circumstances and can cause the user to unexpectedly
lose their current configuration information. In its place, a section
on troubleshooting is added that describes how to rebuild a project
using the desired configuration.
Change-Id: I4eaace2888000c3ec5d101c27a38c74c2987312e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of single-line comments required by a previous set of
coding conventions. These comments provide no value to readers
and just clutter things up.
Change-Id: I2a08b12cf5026253de56979efdfc510e7e68defe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises kernel so that it uses the standard boolean type library
defined for C99, rather than having its own custom boolean type.
Also revises sample projects that used the non-standard type.
Change-Id: Ib41b7f836da25352aa5ae9dfbbfdd29739017b6f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
As a result of the conversion to the new build system, this file
was missed when the test project was eliminated.
Change-Id: Ie61d2549910cfeee2c0627451d05a5b1faff3deb
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates sample projects to ensure that fiber stacks are properly aligned by
using the __stack tag.
Change-Id: I4f92033571d65aa87b6d46da5d7cb6d92eadc27a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The length of time it took for the microkernel's test_fp_sharing test to run
was occasionally causing issues with sanity_chk. The test would take close
to five minutes to finish and sanity_chk has a five minute timeout for the
tests. To resolve this, the number of iterations for which the test executes
has been cut in half (from 1000 to 500).
Change-Id: I171b96f6af81a8b08d0367beecab536f16d1ca7e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Future commits will prevent task_timer_alloc() from returning
INVALID_OBJECT.
Change-Id: Ib7ec2e0fafb625223d762d73f15c128f134169b3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The number of timers in the system is no longer configured via the VPF, but
rather through the kconfig option NUM_TIMER_PACKETS.
Change-Id: I58a4b3009e183a9d04e3618418baa73ed296d0af
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates the need to reserve the "kernel_" prefix in the
kernel namespace. Also, aligns versioning with other APIs
that are neither nanokernel_ or microkernel-specific, such
as the system clock APIs.
Change-Id: I81e43cd03849b45a4b432b0875dc8b1d5862dba9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the kernel now provides a minimal string library, there is
no longer any reason not to use the standard memset() and memcpy()
APIs.
Change-Id: Iad587ace6f41fd94c9c961d13d9322495a7da1be
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These routines are either unused, or are always used in manner
that does not require their added security checking.
Change-Id: I6f484924ebc3d395a20879445a2fcabebf6c5014
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Test project is no longer needed, since the associated library
is now scheduled for removal.
Change-Id: I843018e647c4bdc82c785ae21dbfa9de608c0d50
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This commit enables the outdir directory.
Kbuild output files will be generated at the outdir directory
inside the project directory.
Change-Id: Icec04aca1753326c9d50dea20c71850c1d8c3dd0
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes an issue with the boot_time sanity check
when tested for minute ia processor.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia5be3ceaf71114412819bac131b71686d775c6ca
This commit changes the build parameter CONF_OVERLAY with the
name CONF_FILE.
Change-Id: I404a4aa87b167a9ca4e7b395d53c2f7794b232bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes a kconfig dependency in the nanokernel boot_time
sanity expert test.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ieb5c3c2033045a7db0382298ade8427cf31d713a
This commit removes the TIMO_BASE setting from the sample
Makefiles.
Change-Id: Iff487ecb1e412e379528cca520470f87123cf4b4
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Makefiles to add sanity checks for
the bluetooth driver.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Iadfe6eb2662347a981393ffeb3e343f32c5f67f0
It seems CONFIG_PERFORMANCE_METRICS is needed for this
test to build, so enabling it.
Change-Id: Iafc0be794f0931b33bcef2ba3ace56ee88f75258
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit updates the source Makefile for test_fp_sharing.
Change-Id: Iab70d6fb3b17b8e078549130b10c6c9c8a956b73
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit updates the dependency symbols needed in the
nanokernel config overlay files.
Change-Id: I838b76aefa79e6079b4c8420125c7e711b6441d7
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit updates the dependency symbols needed in the
microkernel config overlay files.
Change-Id: I0a846956a7d0d6aaa93cd4bf11ba3853f6301220
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds all the root Makefiles needed by the
microkernel sanity tests.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7a267a180ba617ce95a499dcf2782630273e8566
This commit adds all the root Makefiles needed by the sanity tests.
Change-Id: I7ef21d0bcd2c383218d600d291111861fe307abd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit updates the list of files that compose the
benchmark-latency measure test.
The raise_int.c files is copied from the test: test_task_irq
because there is no clean way to reference this source outside
of the project in Kbuild.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I20d5cdd042ba35945d213e49e80004e886bfdc6e
This commit fixes the include path for the nanokernek
benchmark test.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I639126b7fcfe82357f166c602049bc09f195c103
The following commits adds the main Makefiles for the nanokernel
benchmark test, using parameters to be used by the sanity check.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia7789ce83a1b6a62805a15fead57a1737a856c2c
The following commits adds the main Makefiles for the microkernel
benchmark test, using parameters to be used by the sanity check.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7601df92006ca81b3680f6c2b4e25de076512e41
This commit adds the EXPERIMENTAL ksymbol to the configuration
snippets used by the benchmark tests.
Some configurations options in the snippets have dependencies
agains this ksymbol.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia714e913777a697cc8b1eafa0fc097496b5972c5
This commit adds the parameters to the Makefile.kbuild for
micro and nano kernel apps samples.
This prepares the sample apps to be used by the sanity check.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7636f0375493e12b4604f6fb6c4b6100d2c6604c
This commit adds all the Makefiles needed to integrate the benchmark
testing in the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7b29cf7839e95b94acc27a45677a067ca5a0c00d
This commit fixes an issue with the Makefile describing the
philosophers demo.
Change-Id: I5502e207aa5d87c04e58daa2d391e2d89ba91a67
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds Makefiles for each sample test in the project.
The Makefiles integrate the test samples into the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I8d84756836c1f7d00dc823d7ff76334c75304d66
This commit adds the capability to the Kbuild system of adding
samples and projects to the build process.
This commits adds the hello_world and philosophers sample code
as an example of how to configure a project into the build
system.
The project can be hosted inside the kernel source tree or
outside the kernel source tree.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id980e959ac6e0061f8227d5d81191a169bfc8fc3
An extended inquiry response or advertising data packet shall not contain
more than one instance for each Service UUID data size.
Change-Id: I41d1a25fdcb2987e8d0cadfb2110fd62b3685f17
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Battery Service along with its characteristics and descriptors
to the database table.
Change-Id: Ifb83ebcb4d6cdafa5df84d643b2e2a69e5a6c1e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Heart Rate Service along with its characteristics and descriptors
to the database table.
Change-Id: Ibff52da7352883edccb7c5b903538a81aad2ba55
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds attributes for Generic Access Profile.
Change-Id: I1fe08429f80341e7ba9fc06ef35a6df9b5abbf84
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Length of "Test beacon" is 11 + 1 of type that should be 12 not 16.
In addition to that make the data variable static since they are only
used locally.
Change-Id: I2d7fb16cf7d383dafc9b083da6cd63a4d9be21c0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's no point in enabling BLUETOOTH_DEBUG_HCI_CORE for the samples
as the user/developer is unlikely to be interested in this specific
sub-module of the Bluetooth stack. The samples already have the
BLUETOOTH_DEBUG enabled, so leave it up to the user/developer to
decide if they want to add specific sub-module debug options.
Change-Id: I327086464561667a2462db0aab00d0ffcdd40d4c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Build peripheral app for targets: pentium4 and ti_lm3s6965
Change-Id: Id98c94217ad39e1716b8f8bc6031b8814bae06f3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update the includes in the sample apps to match what their actual
dependencies are.
Change-Id: I6fdfa4ba0cda563433d51f0ec35fef8f2ee0fa40
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
1) Now invokes pipe routines directly, without the use of function
pointers.
2) Eliminates unreferenced _DEVICE_CHANNEL symbol.
Change-Id: I6e26476265ed8f33febb5a06c9d03daf7147ee5e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Keys off variations of "ICC" to remove references to the Intel C Compiler as
it is not supported.
Change-Id: I09f67880b39839982ed1c450e564c274440628a5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This project requires access to non-public kernel structures
for testing purposes.
Change-Id: Ibfa119b99bda170498503cdbbee6b98f5cf41f54
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The initial memcmp implementation was buggy, so to have at least some
sort of sanity testing of the implementation add a test case for it to
test_libs.
Change-Id: I9e1a48e4b646e80258c1689dde2461a6134dddf8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The variable task_irq_object is global because the test_task_irq project
needed to access it. That data should only be accessed through the API.
To make the variable local, break that dependency to the test project
and restrict the access to the variable.
Change-Id: I1ccb21625d456714a038e0374d124b42aa72e577
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Fixing the folling whitespace issues:
- SPACE_BEFORE_TAB : We should not use white spaces before tabs to alignment.
- TRAILING_WHITESPACE : Lines should not end with a white space.
- QUOTED_WHITESPACE_BEFORE_NEWLINE : Removing unnecessary whitespace before a quoted newline.
Change-Id: I024e8d39164c5e5e9d8370f3499d21b49147feee
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The 'else' statement should be in the same line that the
close brace of the 'if' statement. E.g.:
if (condition) {
do_this();
do_that();
} else {
otherwise();
}
This commit fixed this kind of error using the following script:
#!/bin/bash
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
if [ ! -h $file ];
then
sed -i '/^[ \t]*}$/ {
:review_next_one_too
N
s/^\(.*\)\n[ \t]*else/\1 else/
/}$/ b review_next_one_too
}' $file;
fi;
done
Change-Id: I7e811a572d735fa08e84850055ebbde29eb10e8d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
There should be a whitespace between the 'if', 'for' and 'while' statements
and the open brace. this commit fix this kind of error.
Change-Id: I4bae17d98f8ec8b698d40253a9a4c873111a8904
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
There is no longer a reason to expose information about the
internels of the microkernel's event subsystem to application
files.
Note: The one sample project that tests event processing now
explicitly declares any non-public event APIs in requires.
Change-Id: I4c3f85a7b0bc485713c21424a923102b4f400ced
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Line's length should be shorten than 100 characters. This commit
fixes these lines separating them into two parts.
Change-Id: Ic68c9086866cd778187aa1465470acc0485e2271
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Some checkpatch issues were solved by scripts leaving other problems
such as alignment and indentation issues. In order to comply with the
defined coding style the following fixes were made:
- Fixed the function declaration moving the parameters' comments above
the function in accordance to the doxygen format.
- Fixed functions' opening and closing brackets. These brackets should
not be indented.
- Fixed the 'if', 'for' and 'while' statements adding the brackets
around the sentence.
- Fixed comments' alignment.
- Fixed indentation.
The work was done manually and submitted as one commit. I didn't
separate these changes in different commits because they were fixed all
at once. Basically, all errors were fixed in every file at once.
Change-Id: Icc94a10bfd2cff82007ce60df23b2ccd4c30268d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This commit fixes the issue marked as SPACING by the checkpatch script
deleting the whitespaces between the function name and the open parenthesis.
Change-Id: I972b1646904bf6e1131263f94ab5024a528ae07d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Use scan functionality by simple app that starts LE scan
and in a while stops it.
It uses basic HCI scan interface prepared for
supporting LE central role feature.
Change-Id: Idcde4c742290d46931ab86522e51b0fc547a2d42
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Set the toolchain in case the user doesn't have it set in their
environment.
Change-Id: Ia961598bc125ded9326747cc8c5810635a8481d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling HCI_CORE debug helps to identify possible bugs.
Change-Id: I13df39d63ee9b15f83503d86edc71733c7db94d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allowing to redefine QEMU_EXTRA_FLAGS helps to overcome user channel
stuck cases, you still have the possibility to use bluetooth over tcp
by specifying QEMU_EXTRA_FLAGS="-serial tcp:...". Default behavior
remains the same though.
Change-Id: I3a8190a1ca04029e788bfd424f3b3a3be9f2af75
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Bluetooth regression and system regression would run compile test
for shell app.
Change-Id: I029772483e7aa9ac0717db760d8de1f6be3371b5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for nanokernel build for shell application.
Change-Id: Idf5f3673050c2ac4c941dc9164536fc487e9216b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove old way of starting qemu target and add extra information.
Change-Id: I37c378aa0eb873b3fc16362991eec8a6b661626b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Bluetooth shell sample application make use of serial console shell
and register Bluetooth commands to it. It shows example how console
shell might be used.
Change-Id: I98340422b90e85dc7a2c44823536121999a08952
Co-authored-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It is not necessary to add any PRJ_INCPATH in order to build Bluetooth
samples.
Change-Id: I3ddb0a645e475d937a7067059e8bf5caa783a04e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds a sample which initializes Bluetooth and enables non-connectable
advertising (i.e. starts acting in the LE broadcaster role).
Change-Id: Ic554b1354464b357b44215af1c0b613f123aeb5d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_regression scripts builds all listed projects for all
configurations mentioned in the PRJ_LIST. For targets specified with
"!" it executes test in qemu.
Change-Id: I971a797b2a89547bb14208d0d43d1a36597bad52
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add new targets for sanity_chk script: fsl_frdm_k64f and ti_lm3s6965,
this would add compile tests for mentioned BSPs in sanity check
script.
Change-Id: I556f8e3a5048d2a58ab09b10197e0cc6fb3c8765
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ti_lm3s6965 and fsl_frdm_k64f targets for bluetooth test.
Change-Id: Ibbe8ebbab72abb02505f47a82c904f0e9460e812
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ti_lm3s6965 and fsl_frdm_k64f targets for bluetooth test.
Change-Id: I054c9500511fe40969127445444f85f3fe85902c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Extend bt_start_advertising to make it possible to add any data type
instead of just the name.
Change-Id: I3f2afe1eb64aec51f321f7fd7439e97b3d67374c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hides the existence of _task_nop() from everyone but the
microkernel's no-op subsystem itself. (This change forces the
sample benchmark project that measures no-op performance to
explicitly declare this API itself.)
Change-Id: I0cb2ec32d1c56b10743d5b2e727de2d5a99c95ea
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This is renaming the current stringTest to a stringMemsetTest as a
start to adding in all the other string tests that are currently
not covered.
Change-Id: Ic8fb9263e5588fe16a2cadbec24ffc0565c8224b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Currently these tests are disabled in the regression_chk
application.
Change-Id: Ibf53b25a08201db0b50df7dca96f638b419ea4a8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
All the other test_* functions have recently had this added in.
Bringing this in to be consistent with the other functions.
Change-Id: If8adf58a82445f6b509015c56937353fab79d823
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
After the tree re-structuring, several of the files that the test_libs
functions use are no longer valid, from headers to functions. Updating
to run on the current lay of the land.
Change-Id: I3359a782f5ae8faa7909a13a4cca47f82c22797f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Spaces between the function name and the open parenthesis are not allowed.
This commit fixes the case where only one open parenthesis with leading
whitespaces is present in the line.
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
# fixing spaces between function name and open parenthesis
for line in $(eval $checkpatch_script $file | grep "WARNING:SPACING: space prohibited between function name and open parenthesis '('" | cut -d":" -f2)
do
echo "$file : $line"
sed -i ''$line' { /[ \t](.*[ \t](/ b skip_it s/[ \t]*(/(/ ; :skip_it }' $file;
done;
done;
Change-Id: I1e026eaee930e297374e5f2f725b78f29824dee3
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Changing each four whitespaces for one tab at the beginning of the
lines that the checkpatch script marks as having the warning LEADING_SPACE.
Change accomplished with the following script:
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
for line in $(eval $checkpatch_script $file | grep "WARNING:LEADING_SPACE" | cut -d":" -f2)
do
sed -i -r -e ''$line' {s/^ /\t/; s/^([\t]*) /\1\t/g}' $file;
done;
done;
Change-Id: I999e59710f52098ad3ec336b99c05356215cc671
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The open braces of the 'if','for', 'while' and 'do' statements should be at the end on the
same line of the statement to comply with the defined coding style. E.g.:
if (x is true) {
we do y
}
Change accomplished with the following script:
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*" ! -path "*/outdir/*");
do
if [ ! -h $file ];
then
# obtaining the line's number where the error is reported in a reversed order
reversed_lines="";
for line in $(eval $checkpatch_script $file | grep "ERROR:OPEN_BRACE" | cut -d":" -f2)
do
reversed_lines="$line $reversed_lines";
done;
# fixing the issues in reverse order due to lines can be deleted affecting futher lines
for line_reported in $(echo $reversed_lines);
do
# search for the line where the open brace is
char_found="";
let line=$line_reported-1;
while [ ${#char_found} -eq 0 ]
do
let line=$line+1;
char_found="$(sed -n ''$line' { /{/ p }' $file)";
done
let statement_line=$line-1;
let brace_line=$line;
# condition to avoid modifying lines that ends with the character "\"
char_found="$(sed -n ''$statement_line' { /\\$/ p }' $file)";
if [ ${#char_found} -eq 0 ];
then
# fix the issue
echo "$file : reported on $line_reported (found on $brace_line -> moved to $statement_line)";
sed -i ''$statement_line' { s/[ \t]*$//; s/\([ \t]*\/\*.*\*\/\)$/ {\1/; /{/ b already_done s/$/ {/; :already_done }; '$brace_line' { s/{[ \t]*//; /^[ \t]*$/ d }; ' $file;
fi
done
fi
done;
Change-Id: I517c40bb33840ef531f2319354350f578b238abb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Instead of having custom helpers (like NELEMENTS) for evaluating the
array size avoid the code duplication by using the now available
ARRAY_SIZE macro.
Change-Id: I40e2e55bd4a68e3d24854c12086432aa17ce1abe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5c4719458d7bb90af2ba21594deed6885f958d34
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Id3f9096f28a1bf98035c6a531cd8d2dc66e6448a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
A number of fibers pend on a LIFO, then the task queues data on it, once
for each waiter. Each time, the first fiber in the queue wakes up, is
context-switched to, verifies the data is the one expected, and gives a
semaphore. The task finally must be able to obtain the semaphore an
amount of times equals to the number of fibers.
Change-Id: I2709ec56368fc72d365bd752657fb319a9b6c394
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A number of fibers pend on a semaphore, then the task give the semaphore
once for each waiter. Each time, the first fiber in the queue wakes up,
is context-switched to, and gives another semaphore. The task finally
must be able to obtain the second semaphore an amount of times equals to
the number of fibers.
Change-Id: I36bcd6f5b1b0df73fdb35c2dbbbc639fec9dbae8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Change _nano_ticks to 64-bit with the functions that operate it
for the consistency with microkernel.
Introduce *_tick_delta() functions that return 64-bit value
and *_tick_delta_32() that return low 32 bits.
Change-Id: Id02c9f4b2b5c309ad9aa0a82bb7f4330af7e34a3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to better support different compilers, each test that
uses inline assembler, includes a compiler specific header file
that contains the proper code.
Change-Id: I7e2e27a0663501f934a5bb3539f7e23670a1e755
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
These options are no longer required as malloc-type support has
been previously eliminated.
Change-Id: I93fdb93395bc53c8a550a64fa61a7339d74ba278
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This renaming will impact the following functions:
nano_node_tick_delta
task_node_tick_delta
Change-Id: I5d3fdfe0121674d88b8f3d8777150b2242b88d1a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes.
This will impact:
task_node_cycle_get_32
isr_node_cycle_get_32
nano_node_cycle_get_32
This change also updates the nanokernel test API to work with the change.
Change-Id: I68de883b07d4775b09fda13e503c040b3f14baa7
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes. This will impact the following
functions:
task_node_tick_get_32
isr_node_tick_get_32
nano_node_tick_get_32
Change-Id: I27184c76516da16a0c3f335656f9efcee2fb549d
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This enables debug for HCI_CORE for samples.
Change-Id: Ide0b3c3db0165a5d00439a7bd05fb516bf67a2f5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable CONFIG_BLUETOOTH_DEBUG option for Bluetooth samples.
Change-Id: Id0d0377082b16f78f15c5e968c866bed2df69844
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add nanokernel configuration to build Bluetooth init sample. Later on
sample would added to sanity check builds.
Change-Id: Ib7251c1b3f5d62c4f1e0bb1fba253ebb1e9342df
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The test registers Bluetooth driver to Bluetooth the subsystem and
runs bt_init() which calls open() callback. We return expected error
to indicate that there is no real Bluetooth device attached.
Change-Id: I39526acbb25e7d4bb322d4511659a40505874592
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The test registers Bluetooth driver to the Bluetooth subsystem and
runs bt_init() which calls open() callback. We return expected error
to indicate that there is no real Bluetooth device attached.
Change-Id: I1b324c82ce8be2ce73f2b41a07135b0bc76eed61
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch adds a simple app which initializes Bluetooth and enables
connectable advertising (i.e. starts acting in the LE peripheral
role).
Change-Id: I15bb43ce657b5592d32187a0dfd22ba8bd912641
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Revises the nanokernel footprint benchmark project so that the
minimum x86 configuration explicitly excludes support for the
system timer. (This doesn't actually save any memory, since timer
support was already being excluded; however, the project now makes
this lack more apparent, and does it the same way as the minimum
microkernel benchmark project does it.)
Change-Id: I509994bb640fee3208e4c1397a79cd134172370a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the microkernel footprint benchmark project so that the
minimum x86 configuration excludes support for the system timer.
The resulting "tickless kernel" image is about 1200 bytes smaller
(about 15%).
Change-Id: Ie7be8427963818c7d0d75173d3da844722487f0b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Benchmark code that depends on the state of LITE-related symbols
has this dependency removed, and is now coded as if these symbols
are not defined. This change has no operational impact, as LITE-
related symbols were never defined.
Change-Id: I9b9a108223903b8e4dd675a599ca5b8e5cbe7fc7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
By default, the kconfig option SECTION_GARBAGE_COLLECTION is already enabled.
Removing this option from the project configuration files does not change the
resulting images.
Change-Id: I0f3329aa15a341c2c1082f75162b2b3e12447a26
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Explicitly configures the number of task priorities for sample
projects that require more than 16 priorities. (This ensures
that the projects continue to work properly when the default
value of NUM_TASK_PRIORITIES is reduced to 16 in an upcoming
commit.)
Change-Id: I03b9ae68a6b782c62c8799f44d17e659e7d6074e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the microkernel footprint benchmark sample projects to take
advantage of the NUM_TASK_PRIORITIES configuration option. Most
notably, this reduces the size of the minimum microkernel configuration
by over 500 bytes.
Change-Id: I2be1b0a5a09800559df4d1bf355de38d6c0b9ab3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes the assignment of kconfig option CONFIG_CPU_CLOCK_FREQ_MHZ from
boot_time project configuration files that redundantly set it to the default
value (20).
Change-Id: I901b2d4dc85d1de53dc4a1809b422ee16301ac03
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Simics is not supported. As such, the sample project README.txt files must
not provide instructions on how to execute an image using Simics.
Change-Id: I6cc09169902b5e10f50799c280d0bbc63f1ae624
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
All uses of TC_END are functionaly equivalent to each other
and to the TC_END_RESULT macro. Change TC_END to TC_END_RESULT
so that they are consistent. In the future when TC_END_RESULT
is extended/expanded, it only has to be done in one place.
Change-Id: I61bad52098187f6115896688e0a545d202b6fd05
Signed-off-by: David Norris <david.norris@intel.com>
most places call TC_END_RESULT before calling TC_END_REPORT.
These new calls to TC_END_RESULT are added so it is used
consistently in the microkernel tests.
Change-Id: I1125662c47a487b1bf4054d63ee2b9dc314a253e
Signed-off-by: David Norris <david.norris@intel.com>
These options are now enabled by default.
Change-Id: Ie7f2abb7b7c89f1a5a02ddc831367710a3d72c1f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Revises ARM M3/4 ISR installation project, which doesn't actually
require the GDB_INFO capability.
Change-Id: I9eefba5678e2c4a0fa7a8e57df603d25af144eb1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises boot time benchmarking project so it doesn't utilize the
CONTEXT_MONITOR capabililty, which is still [EXPERIMENTAL] and thus
could result in potentially misleading results.
Revises ARM M3/4 ISR installation project, which doesn't actual
require the CONTEXT_MONITOR capability.
Change-Id: I45d2abe85a0049b0c745652d2e78210c9696016d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises this option to make its purpose clearer, and to align it
with other experimantal monitoring-type configuration options.
Change-Id: I593bb7560b5a0544eb05affaa07b59dd78ea907e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This patch adds a very simple application for demonstrating the use of
the bt_init() API. Right now this is just tested to work with qemu and
the HCI UART driver with the help of the btproxy tool on the host OS
side. More information is available in the samples/bluetooth/README
file.
Change-Id: I03f92d158e9e5d57275241502bb8fa94350fc335
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4b7f7806fcfcbeed1abbc2421c3fc470af87eb7d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Idcd3b4dfd86b6e835638623fa7b39401cabdee06
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
VisualDSP is not supported. Furthermore, with the removal of the VisualDSP
comment, there is no longer any justification for the custom BENCH_MIN() macro.
Thus, it is simply replaced with min()--defined in "util.h".
Change-Id: I3c08add1fc9fcd98c388b843c5849fc71fa84fd3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The task_mem_pool_moveXXX() routines are only relevant to multi-node systems.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I575c32a74b158c8b9b6ac6e1baef7b0e4f988270
The routine _task_mem_pool_move() is only relevant to a multi-node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I1a97e2b87d29df7a1a63bcd6d8eea290382f3a7e
Fix benchmark projects makefiles to use i8253 specific configuration
for only two variants of generic_pc BSP - pentium4 and minuteia, but
not for the whole BSP.
Change-Id: Iac89e29d2e26ee411d9c2d2fbcd3335c0e71fb06
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Move time calculation macros from application directory to kernel
directory, since it is used by a kernel component.
In order to follow namespace and naming conventions, convert
macros to SYS_CLOCK_HW_CYCLES_TO_NS* form.
Change-Id: I96e9149c399adc363aed5095ae82a1abc78d2977
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
"Unsupported stdlib" functionality is not relevant to the current "minimal"
libc implementation.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Several sample project tasks that are not to be automatically
started now indicate this by simply specifying an empty task
group list, rather than by defining and using a new task group.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Instances of the custom OFFSET() macro are replaced with the standard
offsetof() macro from stddef.h to reduce code duplication.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adding a line after variable declaration in order to comply with
the defined coding style.
Change-Id: Id41af88404bd37227bfd59a2d71ce08d0d6ce005
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This commit changes the pointer's location in order to comply with
the defined coding style.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: Ibcf1ef0e4fc53b0cb5286b36119e76d017f24cd9
This commit adds the parameter to the reference of the extern function in order to
avoid the checkpatch issue ERROR:FUNCTION_WITHOUT_ARGS.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: I42c53314232622a8e2e615420584601ce9b85404
This commit fixes the coding style of the 'if', 'do', 'while' and 'for'
statements in order to comply with the defined coding style.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: I70d002462db48f36b9589cdb229ba928f3f424b4
This commit fix the return statement in a void function due to this is not useful.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: Icae7892853ed1c6c56c18e0c0c8f8fd1610491ee
This commit deletes the exceeded spaces after #ifdef declaration on the line that
the checkpatch script mark as having the SPACING error in order to complay with
the defined coding style.
The script used to perform this fixes was:
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
cd $VXMICRO_BASE;
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: exactly one space required after that #ifdef" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/^#ifdef[ \t]*/#ifdef /g }' $file;
done;
done;
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: Ic9bb67243f91fa3b5aca6288b306f9b4e8c816fe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit deletes spaces after open parentheses '(' and spaces before
close paratheses ')'.
This modification were done with the following script:
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
cd $VXMICRO_BASE;
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
# fixing spaces after open parethesis
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: space prohibited after that open parenthesis '('" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/\([ \t]*/\(/g }' $file;
done;
# fixing spaces before close parethesis
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: space prohibited before that close parenthesis ')'" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/[ \t]*\)/\)/g }' $file;
done;
done;
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: I4482fc50ec45542afa2e60c5f2fef4e75fb24dd3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit fixes the coding style of the function declarations and aligning
the open and close brackets and change the style of parameter's documentation.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: I648d36eb29dafc7fcd87b8db01e682bea993e5d2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
QA related scripts should be either maintained out
of the tree or come as enhancements to the sanity check
scripts.
Change-Id: I6dceed81f66b84cedad2dd84fd42d6b388de3468
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
