Convert echo-server to use DTLS for UDP connections if DTLS
is enabled by prj.conf file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Duplicate CONFIG_SYS_LOG_NET_LEVEL variable was defined in
config files so removing extras.
.config:58:warning: override: reassigning to symbol SYS_LOG_NET_LEVEL
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Couple of network samples had extra startup thread which is not
needed currently. This was an artifact before moving to using
unified kernel.
Jira: ZEP-2236
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Run http_server, http_client and https_client compile tests with
Bluetooth config. For http client tests we only use qemu_x86 as
the qemu_cortex_m3 tests failed because of too little memory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_NET_CONTEXT_NET_PKT_POOL is defined, which is the
default for Bluetooth, then create the pool and use it when
sending network packets. This is needed when trying to send
TCP packets using Bluetooth IPSP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is plenty of memory for QEMU currently so no need to
manually set the amount of memory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_NET_CONTEXT_NET_PKT_POOL is defined, which is the
default for Bluetooth, then create the pool and use it when
sending network packets. This is needed when trying to send
TCP packets using Bluetooth IPSP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_MQTT_LIB_TLS is introduced to enable TLS support.
Also, prj_frdm_k64f_tls.conf is added to demostrate the whole idea.
jira:ZEP-2261
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Use net app API since we want to enable MQTT with TLS.
mqtt_connect() and mqtt_close() are added to build and close the
connection to the broker. The caller doesn't need to deal with
the net context anymore and the most of network setup code in
mqtt_publisher is removed.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
When an app uses a construct such as:
obj-y = main.o ../../../../samples/bluetooth/gatt/hrs.o
in its makefile, it causes said object module to be built in the
source tree, not in the object tree.
When building massively parallel, this usually resuls on the files
getting corrupted, leading to bugs such as:
https://jira.zephyrproject.org/browse/ZEP-2316https://jira.zephyrproject.org/browse/ZEP-2317
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:3: warning: NUL character seen; rest of line ignored
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:4: warning: NUL character seen; rest of line ignored
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:5: *** missing separator. Stop.
as multiple build are trying to touch the same file in the source tree
and of course, race and causes a build bug.
We have known about this issue for a long time, but it requires
modifications in the build system that there is no time to tackle.
A suggested workaround is to include the source files into a local .c
file, so this is what this patch does, to remove the random noise.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
There's no need for debug logs by default in the mesh sample, and it
just contributes excessively to the ROM footprint.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This PR enables Bluetooth stack if Bluetooth L2 is
compiled in.
Change-Id: I8f8127031140f0603615af44e0809d203db32f48
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Not easily done using RAM/ROM filters, configurations need to be adapted
to make this fit on more devices. Limit the target platforms now while
we figure out configurations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In many networking tests we had to configure SLIP in the prj.conf
leaving those configurations Qemu specific. This change enables SLIP for
QEMU targets automatically and allows reuse of prj.conf for multiple
boards.
Additionally, the TUN options is removed. This option was not used
anywhere.
To enable self-contained networking tests that do not depend on SLIP, we
introduce the new option NET_TEST which disables TAP and allows testing
in QEMU without the need for a host interface.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
kernel APIs have changed to using K_THREAD_STACK_DEFINE to declare stack
memory as well as K_THREAD_STACK_SIZEOF to calculate it's size.
Adjust irc_bot sample to reflect those changes.
This fixes stack related page faults when running irc_bot with
CONFIG_X86_STACK_PROTECTION enabled (which it is by default for qemu).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This sample includes builtin UDP and TCP echo servers, max
MAX_CONTEXTS=3 as set previously, they just didn't work.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add an initial implementation for the Bluetooth Mesh Profile
Specification. The main code resides in subsys/bluetooth/host/mesh and
the public API can be found in include/bluetooth/mesh.h. There are a
couple of samples provided as well under samples/bluetooth and
tests/bluetooth.
The implementation covers all layers of the Bluetooth Mesh stack and
most optional features as well. The following is a list of some of
these features and the c-files where the implementation can be found:
- GATT & Advertising bearers (proxy.c & adv.c)
- Network Layer (net.c)
- Lower and Upper Transport Layers (transport.c)
- Access Layer (access.c)
- Foundation Models, Server role (health.c & cfg.c)
- Both PB-ADV and PB-GATT based provisioning (prov.c)
- Low Power Node support (lpn.c)
- Relay support (net.c)
- GATT Proxy (proxy.c)
Notable features that are *not* part of the implementation:
- Friend support (initial bits are in place in friend.c)
- Provisioner support (low-value for typical Zephyr devices)
- GATT Client (low-value for typical Zephyr devices)
Jira: ZEP-2360
Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's expected that there will be few socket-based samples, so move
tehm under samples/sockets/ to not clutter the main dir.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Implements asynchronous TCP echo server using non-blocking sockets
and poll, with concurrent connections support.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The coaps server sample application did not start because
number of IPv6 multicast addresses was too low. Increased
the address count from 2 to 5.
Jira: ZEP-2359
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The macros for calculating the length of the configuration
descriptors have been interchanged, fix it, and use the
correct macro for the length of the DFU mode configuration
descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
According to RFC7959 page 30, "The end of a block-wise transfer is
governed by the M bits in the Block options, _not_ by exhausting the
size estimates exchanges."
Therefore, we should check the M bit instead of total size (which
is not always available, too)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
This disable debug options in order for the image to fit in boards
such as arduino_101 and quark_se_c1000_devboard.
For convenience this adds another configuration file with as it was
available previously which can be build using:
make CONF_FILE=prj_dbg.conf
JIRA: ZEP-2378
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some README files referenced wiki articles that have been
moved to the doc area on the website.
Fixes#668
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Initialize the buffer to 0 and read one byte less than the
buffer size. The result should be that the last byte of
the buffer always stays 0. This way it is possible to verify
it the driver does not write outside the buffer.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Remove NET_UDP_HDR() macro as we cannot safely access UDP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the UDP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The config file for KW40Z has the shell disabled, as available
SRAM memory is limitted to 16kB.
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT should be used instead of
CONFIG_NET_IFACE_UNICAST_IPV6_ADDR_COUNT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since the controller comes with a transmit buffer size that mirrors the
maximum size of a transmit packet, use that to size the buffers that are
used in the hci_uart application to receive packets from the Host over
the UART.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Explicitly select CONFIG_BLUETOOTH_BROADCASTER and
CONFIG_BLUETOOTH_OBSERVER in the scan_adv sample.
If the Controller is included without connections support
then only broadcaster support is compiled in by default,
hence add broadcaster and observer role support explicitly
in the prj.conf file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Next two commits will increase the mbedtls ram usage a bit and
https client and server sample test will fail.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the net app API is automatically initialized, there is no
need to call net_app_init() by the http client and server sample
applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removing CONFIG_NET_APP_SETTINGS from prj.conf file as the
sample does not use or need any IP addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit will convert echo-client to use the net app API
when creating the connection to peer. Most of the network
setup code will be removed from echo-client by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit will convert echo-server to use the net app API
when creating the listening service. Most of the network
setup code will be removed from echo-server by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network application API is a higher level API for creating
client and server type applications. Instead of applications
dealing with low level details, the network application API
provides services that most of the applications can use directly.
This commit removes the internal net_sample_*() API and converts
the existing users of it to use the new net_app API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We get some failures to build if we don't filter this test to only
boards that support uart interrupts.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Makefiles which start QEMU (make run) have been changed to operate
off of the QEMU_INSTANCE variable. QEMU_INSTANCE is simply appended
to the pid and sock file names. This makes us able to run multiple
QEMU Zephyr instances of the same sample.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
There were a few different issues with the UART_CONSOLE filtering:
* Filter was incorrect - UART_CONSOLE should be CONFIG_UART_CONSOLE
* platform_exclude was used for drivers that had a #error for lack of
interrupt support. We can now use CONFIG_SERIAL_SUPPORT_INTERRUPT in
the filter for that. This catches all the various drivers that needed
don't support uart interrupts, not just the onces that had a #error
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch allows more generic USB configuration in the samples
and removes platform dependent driver configuration.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Where possible, replace the use of filter with newly added keywords.
This will speed things up and in some cases add more coverage due to bad
filters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The example source code is POSIX-compatible (modulo include files),
i.e. can be built and behaves the same way for Zephyr and a POSIX
system (e.g. Linux). Makefile.posix is available for the latter.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The code has missing proper conversion from net_buf to net_pkt
that was implemented in commit db11fcd "net/net_pkt: Fully
separate struct net_pkt from struct net_buf"
The sample.yaml had incorrect whitelist string so this is also
fixed here.
Fixes#596
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The global mbedtls heap is set automatically now so no need to
set it individually in the http library.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We incorrectly had an arch_whitelist constraint set to 'qemu_x86' that
should have been a platform_whitelist, so fix that and add arduino_101
frdm_k64f to the platform_whitelist as targets that we can test this on.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With the introduction of privacy, the system workqueue is now being
linked into the image, growing the RAM footprint considerably.
In order for the sample to fit in QFAA and QFAB variants of the nRF51
(16KB of RAM) we reduce the workqueue stack size to 512 since the RPA
update mechanism doesn't use more than 340 bytes and we stick to 16
connections maximum.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The condition in src/Makefile is not necessary since the
net_private.h is always included from wpanusb.c and is not
dependent on the transceiver.
Change-Id: I07a0bf599f328bacb8c5677f20eb221a05f30866
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 83edd615ca.
Causes the documentation build to fail on Kconfig parsing, needs fixing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable application specific configuration to be easily included
and manageable via Kconfig. Add sample.
Signed-off-by: Michał Kruszewski <mkru@protonmail.com>
ISSM team wanted to integrate
"samples/application_development/static_lib" app
into their IDE. Al-ashi, Mahmoud <mahmoud.al-ashi@intel.com> found
it failed to "make flash" this app.
Also this patch added "make flash" build targets.
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds bt_gatt_register_service using bt_gatt_service which contains
the attribute array that is then added to the database saving a pointer
in each and every attribute declared.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GAP is mandatory service and now that the db can only be build
dynamically there is no reason to keep the applications registering it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removes CONFIG_BLUETOOTH_GATT_DYNAMIC_DB in preparation to the
introduction of bt_gatt_unregister.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some files have moved from their original location, or are no longer
available. For the mbedtls samples, tweak the link to point to a page
where links for current and previous downloads can be found.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit fixes compile error caused by commit 39962dc9
"samples: use k_thread_create()"
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This https-client sample starts to send HTTP GET/HEAD/POST
requests same way as http-client, to https server that can
be found in net-tools repository.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Various network samples contained QEMU slip setup instructions
or those instructions were missing. A reference doc in
doc/subsystems/networking/qemu_setup.rst file already has the
setup instructions for QEMU. So add a reference to that file
in samples/net/*/README.rst files and remove unnecessary slip
setup instructions in relevant files.
Fix various typos in readme files at the same time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sample app "static_lib" is very important to Zephyr user, which
demonstrate how to build and link a static lib.
ISSM team wanted to integrate this app in their IDE for quark platforms.
However they find the in "static_lib/hello_world/Makefile" BOARD is
hardcoded as qemu_x86.
This patch supports other BOARD passed from build command.
I have verified this app working fine @Arduino101.
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Add clarification that the DNS server configuration must be edited in
the respective prj.conf file.
JIRA: ZEP-2040
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The STM32F412 has PWM output capabilities. Add support to the blink_led
samples.
Tested using a Nucleo STM32F412ZG board (PWM output on pin 28 of the
CN11 Morpho connector and pin 29 of the CN10 Zio connector).
Change-Id: I75fb986fa97bd1c07c6375938430e7963297cd9d
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
The STM32F413 has PWM output capabilities. Add support to the blink_led
samples.
Tested using a Nucleo STM32F413ZH board (PWM output on pin 28 of the
CN11 Morpho connector and pin 29 of the CN10 Zio connector).
Change-Id: I3b25b09cab54265b28088ac9681aec588d9d48b5
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
The number of RX and TX buffers is increased to 64 as the
earlier limit can cause memory exhaust in some cases.
Jira: ZEP-2223
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fix is basically a no-op as the rx_buf pointer cannot be null
in practice, but in order to avoid Coverity complaining about
it add some null pointer checks to the UDP handling code.
Coverity-CID: 170124
Jira: ZEP-2235
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of NULL terminated buffer arrays, let's add a parameter for each
that tells the number of spi_buf in it.
It adds a little bit more complexity in driver's side (spi_context.h)
but not on user side (bufer one has to take care of providing the NULL
pointer at the end of the array, now he requires to give the count).
This will saves a significant amount of bytes in more complex setup than
the current dumb spi driver sample.
Fix and Use size_t everywhere (spi_context.h was using u32_t).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Waiting for an NET_EVENT_IF_UP before trying to connect isn't sufficient
in some cases; for instance, on devices using the MCUX HAL, such as the
FRDM-K64F, the interface will have the NET_IF_UP flag set even though
the link negotiation didn't yet complete.
Executing this sample on such board will produce the following output.
Notice the "Enabled 100M..." message right after trying to connect.
[dev/eth_mcux] [DBG] eth_0_init: MAC 00:04:9f:6f:91:da
net_context_connect error Is the server (broker) up and running?
[publisher:247] network_setup: -60 <ERROR>
Bye! [dev/eth_mcux] [INF] eth_mcux_phy_event: Enabled 100M
full-duplex mode.
Even though the returned error is ETIMEDOUT, increasing
net_context_connect()'s timeout parameter to several seconds isn't
sufficient; other steps performed by network_setup() after the link has
been fully established are necessary. As a stopgap measure, try
connecting a few times before giving up (more than one connection
attempt should be made by application in most cases, anyway.)
It might be the case that we need events to monitor ethernet link
(re)negotation in addition to the NET_IF_UP bit.
Jira: ZEP-2036
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The state machine of the game assumes that the user needs to
explicitly re-select multiplayer game when disconnected. We need to
therefore make sure that advertising stays off as soon as the first
connection happens.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Occasionally the sound might stay enabled for the restart timeout (2
seconds) if the ball would hit the wall right before missing the
paddle. Ensure that it's disabled whenever the game ends.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the HTTPS connection is closed, then properly handle call to
HTTP parser init in case of error and also remove any pending
data that belong to old connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The buttons on the microbit cause quite easily "ghost" key presses.
Add a simple filter that ignores button presses from the same button
that happen less than 100ms from each other.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The stuff that the GPIO button callback does (in particular the printk
calls) requires more stack space from the ISR stack. Increase it to 1k
from the default 640.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This enabled testing CONFIG_BLUETOOTH_SHELL with configuration other
than btshell and enables ipsp sample to use bt shell module which
allows to disconnect, print metrics, etc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch add arm core MPU support to NXP MPU driver.
With this feature it is now possible to enable stack guarding on NXP
MPUs.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Add beeps whenever the ball hits the walls or the paddle. Requires a
piezo buzzer connected to pin 0.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial draft of a pong game using the display on the micro:bit
and its two buttons. This draft only supports a solo game where the
ball bounces from the "roof" and lets the player play against himself.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This gives a quicke example on how to use SPI asynchronous calls with
kernel's k_poll API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding a struct k_poll_signal parameter to driver's API unique
exposed function.
If not NULL, the call will be handled as asynchronous and will
return right after the transaction has started, on the contrary
of current logic where is waits for the transaction to finish
(= synchronous).
In order to save stack, let's move the device pointer to struct
spi_config. So the call is still at a maximum of 4 parameters.
Adapting spi_dw.c and spi driver sample to the change so it still
builts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This application intents to test an SPI driver by looping over MISO/MOSI
line where the controller will then send data to itself.
It will test various buffer tx/rx schemes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is not enough memory to run the HTTP server sample
application in Arduino-101 so remove the config file.
Jira: ZEP-2157
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch add a controller specific write function and fixes a
documentation error in the mpu_test README file.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds the mpu_stack_guard_test to the available samples.
The purpose of this test is to exercize the thread stack guard enabled
via MPU on arm platforms.
Change-Id: I4665a20956d9e6d0dd4b5cc862e82040a53afafc
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds the Thread Stack Guards configuration option to the
synchronization sample.
This is meant to be an easy way to prove that the MPU can be dynamically
programmed on the supported platforms.
Change-Id: I77fbe6af3303ff8a2904768abd4cc9797f03c092
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Rename SOC_STM32L476XX to SOC_STM32L476XG to keep flash
size information.
Aim is to be able to distinguish flash size variants of
the SoC when needed (for instance in dts/arm/st/mem.h file)
Change-Id: I834bb5b83c24c39e90c0492a2b22a7c7802de361
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Sometime it is observed on the Arduino 101 that when we write more than
4 bytes into TX USB Endpoint, first 4 bytes are getting repeated
(frequency of occurrence ~1/3000).
This patch does following :-
1. In sample application "cdc_acm", it adds capability to
handle partial transfer data incase data is transferred partially
if exceeds maximum data transfer size.
2. It restricts write of more than 4 bytes into TX USB Endpoint.
This is work around to avoid issue occarance.
Jira: ZEP-2074
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit creates a HTTP server library. So instead of creating
a complex HTTP server application for serving HTTP requests, the
developer can use the HTTP server API to create HTTP server
insteances. This commit also adds support for creating HTTPS servers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_sample_app_init() is now able to wait that both IPv4
and IPv6 addresses are setup before continuing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since more and more code is going to be reused by both the Host and the
Controller, this commit introduces a common/ folder that will contain
everything that is not tied to one of the two components but shared by
them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make sample working for other architectures.
SCSS_REGISTER_BASE and SCSS_SS_STS are defined in soc.h
Change-Id: Ie477520d2fb9bfcbbb5038ff42356a56d8180a1f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
More general spelling fixes, and cleaning up stray UTF-8 characters
such as curly-quotes, em- and en-dashes. Use replacement strings
for |reg| and |trade|.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Passkeys are always 6 digits in length and should therefore be
zero-padded if necessary.
Jira: ZEP-2113
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This creates a common API for network sample applications for
setting up IP addresses etc. The HTTP client application is modified
to use this API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of separate sample application that does everything
related to HTTP client connectivity, create a HTTP client library
that hides nasty details that are related to sending HTTP methods.
After this the sample HTTP client application is very simple and
only shows how to use the client HTTP API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to achieve proper sharing of configuration options, everything
that is common to both the Host and the Controller should now be placed
in the top-level Kconfig file, and Controller-only options are in the
controller/ Kconfig one.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit provides sample application for sensor hts221.
By default, it is enabled on board disco_l475_iot1
Change-Id: I535fac8a670fa89cc1cae15ea1abe9cfe4b6c56b
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The files for the Arduino Due needed to be updated to use the new
configuration when the SoC moved from the atmel_sam3 directory to
the atmel_sam/sam3x directory.
Jira: ZEP-2067
Signed-off-by: Justin Watson <jwatson5@gmail.com>
Since most of nRF5x-based boards can be used either as a standalone
development kit or as a BLE controller to connect to an external host,
add DT overlays so that the baud rate is correctly set to 1Mbit/s
whenever building the hci_uart sample application.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We're moving the project code to GitHub folks, so change references
in the documentation from gerrit over to GitHub:
https://github.com/zephyrproject-rtos/zephyr
Change-Id: Ic491a62ed43fc799eb5698e92435cb6eb4d89394
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The sample in its default configuration waits for DNS server
configuration via IPv4 or IPv6 specific means. Until this
information is receives, DNS querying won't even start. Make
diagnostic messages explicit of this fact, because if user
doesn't have required services available in the network, the
sample will appear to just hang.
Jira: ZEP-2061
Change-Id: I56a5b7354a2d1239a35d8334ed95a15ebd19254f
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_pkt_get_len() is the correct API to get network packet
length.
Jira: ZEP-2076
Change-Id: Ifff6f3d5df28b3684cc8bb3758f9e8bccd5d4534
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add config file to be used for testing KW41Z's IEEE 802.15.4 driver.
Jira: ZEP-2026
Change-Id: I7042c57ad33ff72b35d24fbf28085b99b2301726
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
The dns_resolve sample application did not had project file for
two boards that the README file is talking about, so adding them here.
Jira: ZEP-2040
Change-Id: I68e825854a171b09d56df91ab80ce5d9349733f6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For stream-based protocols (TCP), adding less data than requested
("short write") is generally not a problem - the rest of data can
be sent in the next packet. So, make net_pkt_append() return length
of written data instead of just bool flag, which makes it closer
to the behavior of POSIX send()/write() calls.
There're many users of older net_pkt_append() in the codebase
however, so net_pkt_append_all() convenience function is added which
keeps returning a boolean flag. All current users were converted to
this function, except for two:
samples/net/http_server/src/ssl_utils.c
samples/net/mbedtls_sslclient/src/tcp.c
Both are related to TLS and implement mbedTLS "tx callback", which
follows POSIX short-write semantics. Both cases also had a code to
workaround previous boolean-only behavior of net_pkt_append() - after
calling it, they measured length of the actual data added (but only
in case of successful return of net_pkt_append(), so that didn't
really help). So, these 2 cases are already improved.
Jira: ZEP-1984
Change-Id: Ibaf7c029b15e91b516d73dab3612eed190ee982b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In tickless kernel mode, time parameter of _sys_soc_suspend is in
milliseconds. Based on the kernel mode use the correct
mulitplier to convert to seconds.
Jira:1821
Change-Id: Idf156f56ece79a82729ebb124d1552a5eeb69e25
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds changes to enable existing kernel and timer tests and samples to
be used to test the tickless kernel feature.
Updated samples/philosophers and tests/kernel/timer/timer_api apps
Run the tests using following commands
make pristine && make BOARD=<board> CONF_FILE=prj_tickless.conf qemu
Board could be any of the following
qemu_x86
quark_se_c1000_devboard
Jira: ZEP-339 ZEP-1812
Change-Id: I1530b19b79ddeb0e2181594caf15f3ac28ff51f4
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Sys log already break a line after each line, by default, so removing
the '\n' on log messages.
Enabling support for sys log colors.
Change-Id: Ica3a601aba0bbbd2d9438b41fb7bca0aad9c05f4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Don't return without freeing the session when relevant.
Change-Id: I9e5903791f8eb54026c4bb2ddda9f1fe9f3f7bb3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch contains a MPU test with a set of options to check
the correct MPU configuration against the following security
issues:
* Read at an address that is reserved in the memory map.
* Write into the boot Flash/ROM.
* Run code located in SRAM.
The MPU test application uses the Zephyr shell.
Change-Id: Ib40dc76b082b800884fd636a1509a0712227d681
Signed-off-by: Marc Moreno <marc.morenoberengue@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This sample application uses the kernel system logger already present
in Zephyr and publishes events through the SEGGER RTT protocol, so it's
available by the SEGGER SystemView application.
[1] https://www.segger.com/systemview.html?p=1731
Jira: ZEP-1463
Change-Id: If1eba4644b95175660b3040bdc4b2717b2cfc9ad
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08c682bfc0b80dfa88de859e90a011bcd2db2762
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some incompatible changes were introduced when net and bluetooth
branches were changed at the same time.
Change-Id: Ifa03f85d26a63ade0fcc029377d54850c0e92451
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This sensor is supported already with many features, using it to test
SPI and I2C is an overkill. For both basic I2C and SPI samples we have
the FRAM samples supporting both IOs.
Change-Id: I794e584bd540d5fe6353fa3370aac0f1d6d105dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
TCP requires buffers to be acked thus it retain a reference, but L2
driver actually consumes the buffer so it needs a context pool to store
to original ones.
Change-Id: Ie9083ab361d3674c33080f9e7e6c7248aaf7abc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I248d53000d8e57b902b9a18fdcfc9e995142a8b3
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a sample demonstrating sound output using PWM to a piezo buzzer
connected to the external edge connector port P0.
Change-Id: I8c0902fd935f2eb3b9979476a7540e7a0216ca63
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Most boards enable a serial driver by default, but the hexiwear_kw40z
does not because it uses Segger RTT for the console. This sample
requires a serial driver, so add CONFIG_SERIAL=y to its project conf
file.
Jira: ZEP-1391
Change-Id: Iee813d1054378040fe9ff72a3ca1ea7bd66bcdfe
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add support for nRF5x series GPIOTE based PWM driver
implementation.
Provides upto 3 pins/channels using one HF timer, two PPI
channels per pin, and one GPIOTE config per pin.
Change-id: I6056b199ec2cff595ba8fea9f659a0338ed4635b
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This can be useful to override the default value, for testing.
Change-Id: I23b559152c71955ff5aa6fd3643f1f40f5594194
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
DNS resolving is better done with DNS resolve API so remove
the DNS client API which is quite hard to use.
Change-Id: Ide4973a5be674414ea6e04a35c938195cce40b6a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Modify the code to use DNS resolve API instead of DNS client API
as the latter is being phased out.
Change-Id: I6a7618d770621fee1f502d2bc277a162c589108a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to test the coaps_server sample app on
Arduino 101 board.
Change-Id: I7b393dac03a8020b7bd515c3b5b2fd961940bc21
Signed-off-by: Wu Jiequan <jiequanx.wu@intel.com>
Added bt test code in the http_server sample app and in order
to test on Arduino 101 board, added prj_arduino_101.conf file.
Change-Id: Ie68a81ee809e8618f70b5fab6fdbd66692401014
Signed-off-by: Wu Jiequan <jiequanx.wu@intel.com>
The filter expects CONFIG_, otherwise it is noop
Change-Id: I2b0a02b6450287a090b69a12324fe7f7cf494999
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Filter was wrong and sample was not being built on any boards. Exclude
platforms that do not support interrupt based UART drivers.
Jira: ZEP-2014
Change-Id: I84a690e7c93fae52335434830b83086019cfd00d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The context buffer pool was introduced to deal with TCP holding buffers
when 6LO may modify them, therefore it makes sense to have it enabled
by default when TCP and 6LO are enabled given that the code can deal
with NULL pool in case the application don't implement one.
Change-Id: I600ca31ab40c96ee27937c2e885e332b0cee4995
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Atmel SAM family GMAC Ethernet driver is implementing zero-copy
networking. As a result it has to reserve a defined amount of RX
data net buffers before bringing up the interface. Since net buffer
pool is initialized by the network stack and this driver was bringing
the interface up in its initialization function the driver initialization
was performed, as a workaround, after network stack initialization. It
is not a clean solution. This patch fixes this by bringing the
interface up in interface initialization function. The driver itself
can now be initialized before the network stack is.
Tested on Atmel SMART SAM E70 Xplained board
Change-Id: I65886fd6db6f27a10628e393cfabd8e5f78c08ff
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Adds a max30101 sample application that polls sensor data and prints it
to the console.
Jira: ZEP-720
Change-Id: I50f28eaf9ea2ff5bfbb9fb6922c4006d5c02e739
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Both the string and image rendering may want to take advantage of
scrolling and sequential display capabilities. Consolidate the APIs so
that there's a single one for images (mb_display_image) and a single
one for strings (mb_display_print). Both take a duration parameter for
the per-frame duration as well as a mode parameter which specifies
sequential vs scrolling behavior as well as an optional looping flag.
Change-Id: Ia092d771e3f1b94afd494c7544dab988161c539e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This addresses the issues found by QA in ZEP-1012 and clarify the
documentated behavior as described in ZEP-1859.
Change-Id: I602e5749db7f6f44cf5be449b8e6f0d2ba66b69b
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: Ie5ff404ac23621dbcf6ca61734ed6f72832c1ce2
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: Ib2d9b1cc4144bd84b1b89691a80dffd99212289d
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: I37c654fb0bb7ebdf288af01e41ce5497969f8968
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: I46cd75d714449de806a85dde08756c8e190488dc
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: I57d65a8888f78aa61d776f607a5db86bdb35726c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: Ide66f75ca8fac0d5f65fbfc50dc9d130cf45b392
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname` to
create a link to that doc from other docs.
Change-Id: I7d7b98f3a9d22350ca983b3558bf83f77fd6e379
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a new mb_display_print() API which takes printf-style parameters
and outputs scrolling text instead of one character at a time. The
existing mb_display_str() API is renamed to mb_display_string() for
consistency, and now also takes printf-style parameters.
Change-Id: I59c42bcd74c62f05ecb6d097dc808b9e5c1984c5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds a simple driver to access the 5x5 LED display found on BBC
micro:bit boards. The display is so limited that no effort is done to
try to integrate with the existing console (which would likely make
the display unusable). Instead, dedicated mb_display_* APIs are added
that are specific to this display.
References:
https://www.microbit.co.uk/device/screenhttps://lancaster-university.github.io/microbit-docs/ubit/display/
Jira: ZEP-1990
Change-Id: I431b5b358b5f07592a60d3aed87eaab6ac20ce25
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This change introduces console_getchar() and console_getline() API
calls which can be used to get pending console input (either one
char or whole line), or block waiting for one. In this regard, they
are similar to well-known ANSI C function getchar/gets/fgets, and
are intended to ease porting of existing applications to Zephyr, and
indeed, these functions (shaped as an external module) are already
used by few applications.
The implementation of the functions is structured as a new "console"
subsystem. The intention is that further generic console code may be
pulled there instead of being in drivers/console/. Besides the
functions themselves, initialization code and sample applications
are included.
At this time, there're may limitations of how these functions can
be used. For example, console_getchar() and console_getline() are
mutually exclusive, and both are incompatible with callback
(push-style) console API (and e.g. with console shell subsystem
which uses this API). Again, the intention is to make a first step
towards refactoring console subsystem to allow more flexible
real-world usage, better reusability and composability.
Change-Id: I3f4015bb5b26e0656f82f428b11ba30e980d25a0
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
- Let's use samples settings
- Enable both net and 15.4 shell modules
- Change prj_*.conf accordingly
Change-Id: If7e32a42c8dc7026d0580b1e94e819e1eda82e5b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And use them accordingly in the common code part.
Change-Id: Id91b76e5baea607c0d68eebcde6f84e4e35ca44c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It can uses CONFIG_NET_APP_IEEE802154_* options instead.
Change-Id: I2501ca2015cfc1e68c6c384cb32c21084d2cb30d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In order to simplify when 802.15.4 is selected on these samples, let's
setup the device through a common code.
For this to work, RFD is now the default.
Change-Id: I46590864442f77d83f681cc0e854c94344648856
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/SAMPLES/APP for name shortening. Applying the change where relevant.
Not only IP addresse will be available as samples settings there but
also IEEE 802.15.4 channel, pan_id, and more for instance.
Change-Id: I05dd24989bd0c804d9588092d67044a3e063bc88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Updates the fxos8700 sample documentation to include board
cross-references and sample output with temperature data.
Change-Id: I8d4e4d8d287806f5480316da09d4072fcf9c05ac
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a fxas21002 sample application that uses the sensor data ready
trigger to periodically print gyroscope data.
Jira: ZEP-1392
Change-Id: Ic9d3803a41f2873aef470a2a73b3f1db44d39b50
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
re-add sample that was dropped by mistake and add a top level Makefile
for building and flashing two cores.
Change-Id: Ie22ac1efa7b5373999997489a2c866de19553128
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The echo-server no longer uses multicast addresses itself,
so the multicast address setting can be removed from echo-client.
Change-Id: Ieab069849ced8a850ada6e6618d625695819be8e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The multicast address setting in echo-server was not really
used for anything so removing it from the app.
Change-Id: I8069c670388702fc46ae2f31506c982caa28212d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
At the moment CC2520 configuration options are selected inside "TI
CC2520 Driver RAW channe" submenu like:
[*] TI CC2520 Driver support ----
[ ] TI CC2520 Driver RAW channel --->
Make RAW channel depends on TI CC2520.
Change-Id: I92879b7f4391f1842c012b6c03c78956e90b9441
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
These are copied verbatim from the echo_server sample.
Change-Id: I56d1386144967177f889e12d4a173bfb6628f18b
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Enables the temperature sensor in the fxos8700 sample.
Change-Id: I2b4c306d3c5528dc32d940476c00180b5df08187
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The fxos8700 driver was previously converted to use the generic
SYS_LOG_SENSOR_LEVEL. Update the fxos8700 sample to use it too.
Change-Id: I2ef02342ce3a25e8d3a3d1b13181872ca0abdc16
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This may cause static analyser error such as the following:
Null-checking "tmp" suggests that it may be null, but it has already
been dereferenced on all paths leading to the check.
if (tmp) {
Change-Id: Id04f8d052d8128003d5b91f7a8303940529ef261
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support connection via SPI and keep I2C as the default.
Jira: ZEP-1698
Change-Id: I42a76131577a37429375364deb07e451107f5d81
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The params command is not printing the arguments, which makes this not
so useful to verify how things work, so added it to the sample.
Change-Id: I2d71ee064f12c7353ba83144824ae46803e2ad39
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The RX callback and timeout parameters were reversed in call to
mbedtls_ssl_set_bio().
Change-Id: I285694e57a024ac3ce735e496daad690f94737ac
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Due to commit 8308b9bd2d ("net/http: Add the HTTP/1.1 API")
every user of CONFIG_HTTP_PARSER would need to add CONFIG_HTTP to
their .conf files. Which is fine for intree samples/tests as they
have been adjusted, but the rest of world working on Zephyr apps
will need to make this changes as well.
Instead, we should have each of the following select HTTP instead of
depend on it, which will make future use of these configs and their
dependencies more intuitive:
HTTP_SERVER
HTTP_CLIENT
HTTP_PARSER
NOTE: As cleanup, this commit also removes the CONFIG_HTTP added to
samples and test .conf files.
Change-Id: I81cfaa19e37333b1bf98778f8147814780e7f77c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Networking stack has split one global DATA pool to RX and TX DATA pools
and also added net_buf pool support to each context. Update the driver
to support this new design. Since the GMAC TX descriptor list has a fixed
size but the number of TX DATA buffers is no longer limited updating the
TX descriptor list has to be guarded by a semaphore.
Tested on Atmel SMART SAM E70 Xplained board
Change-Id: I181e1cdd183e173b85d5d1711b6e78cd5165666d
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Unref the buffer if net_contect_send_to() fails to send.
Change-Id: I182125e64aabd171cd86f42fd9e1de036dd68544
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
LLVM/icx compiler gives some warnings for signed vs unsigned
pointers.
Jira: ZEP-1884
Change-Id: Ide57be898ebd1bff49c8a27aac392fa58dcae726
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds the HTTP Basic Authentication routine "http_auth".
Authentication parameters are defined in the config.h file.
The README file is also updated by this patch.
Jira: ZEP-1543
Change-Id: I2d531966290e87a68c54fc1ac834491ac937df22
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Set a local define with the value previously defined at the Kconfig
file.
Change-Id: I3ee424c4a1102ca00c0059cb9d0a86498806486f
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Using a more efficent entropy call and proper output data
Jira: ZEP-1878
Change-Id: Ife738b84c1e56d58784b4fbc61ec0843579c4453
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
If we have not yet handled the previous RX buf, then we need
to drop the latest received one, otherwise the earlier net_buf
is leaked.
Change-Id: I1b69e07e8b3a3b87c76d923c847dc8316c128e76
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to unref the net_buf in error path in RX and TX.
Change-Id: Icb6d43cb6b7411a5135ea09c6ae96742566fafc4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mbedtls_dtlsclient needs more RX buffers.
Jira: ZEP-1855
Change-Id: I80732c511dfade8fa9139e3bd26e21de73a68acd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Sanitycheck cannot link the result qemu binary because it is too
large. As a workaround, disable mbedtls to get the linking pass.
.../real-ld: zephyr.elf section `noinit' will not fit in region `RAM'
.../real-ld: region `RAM' overflowed by 192 bytes
collect2: error: ld returned 1 exit status
Change-Id: I543571505ab9412db7eac101848c6032d1550d79
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The configuration file for Arduino 101 for the DTLS client
sample needs to define IPv4 and IPv6 addresses.
Jira: ZEP-1169
Change-Id: Iabfd5f067d39faaf8796aac84642b630b11ef7f6
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
This patch replaces some routines found at the HTTP client sample
application by the ones defined at the HTTP API.
Jira: ZEP-1824
Change-Id: Id19e3e346c09716ac95b0c488ff6e6949a5fbabe
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch removes some routines from the HTTP server sample
application and replaces them by the ones defined at the HTTP API.
Jira: ZEP-1824
Change-Id: Ia5db424d62997e01896294e12224aa65a58db432
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the HTTP/1.1 API for Zephyr. This API consists of client
and server context structures enabled via Kconfig variables.
HTTP parser support is enabled via the CONFIG_HTTP_PARSER configuration
variable.
Currently, this API only includes support for writing HTTP requests
(client mode) and HTTP responses (server mode). TLS support is not
considered in this iteration.
Supported HTTP methods:
GET, HEAD, OPTIONS and POST.
Supported HTTP responses:
400, 403 404. The http_response routine may be used to write
any HTTP status code, for example 200 OK.
Jira: ZEP-1701
Change-Id: Ic9ccd4d4578d6d0f3a439976ea332b031644ca7d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add the QEMU x86 project configuration file to the HTTP client sample app.
Change-Id: Ice6ae3f3559680e1d182506671984fd5f946f1d8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Fix a printk format warning found at the HTTP client sample app.
Change-Id: I9665e3e59595b383d6e809af51fe4cf3cd8f8bd8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Cast size_t to int in the http_client_cb code.
Change-Id: I36133da953669ec133421b5e7fb21bec9807fd06
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The invocation of net_if_ipv4_addr_add() should be included within the
conditional code that sets up the address added.
Change-Id: I9b4e76a6b4922b3455bc6b383431b4124d40a49e
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
GET and DEL requests may not have payloads, so it's not correct to
return with an error in those cases.
This was only noticed now that zoap_packet_get_payload() returns the
correct value for all situations.
Jira: ZEP-1754
Change-Id: Ie533041aa7a66855582ff4c5c937d943304bad84
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Bluetooth consumes buffer when transmitting them therefore any protocol
that need to retain them, like TCP, needs to have its own pool to copy
the buffers as they may need to be resent in case they are not acked.
Change-Id: I483c5a3eb4d54fae6b5b2902c69b67e8c2e0be5e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
NATS is a publisher/subscriber protocol implemented on top of TCP. It
is specified in [1], and this is a sample implementation for Zephyr
using the new IP stack. The API is loosely based off of [2].
With this sample, it's possible to subscribe/unsubscribe to a given
subject, and be notified of changes asynchronously. In order to
conserve resources, the implementation does not keep its own track of
subscribed subjects; that must be performed by the application itself,
so it ignore unknown/undesired subjects.
TLS is not supported yet, although basic auth is. The client will
indicate if it supports username/password if a certain callback is set
in the struct nats. This callback will then be called, and the user
must copy the username/password to the supplied user/pass buffers.
Content might be also published for a given subject.
The sample application lets one observe the subject "led0", and turn it
"on", "off", or "toggle" its value. Changing the value will, if
supported, act on a status LED on the development board. The new
status will be published.
Also worth noting is that most of the networking and GPIO boilerplate
has been shamelessly copied from the IRC bot example. (Curiously, both
protocols are similar.)
[1] http://nats.io/documentation/internals/nats-protocol/
[2] https://github.com/nats-io/go-nats
Jira: ZEP-1012
Change-Id: I204adc61c4c533661eacfb8c28c1c08870debd91
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Fix the following error:
Calling "transmit(irc->conn, pong, ret)" without checking return value.
It wraps a library function that may fail and return an error code.
Coverity-CID: 163115
Change-Id: I525e1059e6a2ae3896f68760f1a8a6c68ecfc074
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Run both TCP and UDP to run at the same time. This requires two
extra threads in echo-client sample application.
Change-Id: I450a26d7ab1472150ea8f1309a43897a30bd4d90
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create net_nbuf_frag_del() so that we can track net_buf frees.
If CONFIG_NET_DEBUG_NET_BUF is not defined, then this new function
will call net_buf_frag_del() directly, and if not, then it will
track memory usage.
Change-Id: I5f382436cebc71fdaf12baf7bf964fb63bee7aca
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code used net_nbuf_get_reserve_{rx|tx}_data() function to
allocate a fragment. Instead of that low level function, use
net_nbuf_get_frag() instead. There are few places this is not
possible or is too big change like in few test programs.
Change-Id: Ied7e2b7db352de998b200ffa6ff82471bfa5ebe3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive lot of packets, it might happen that we exhaust
all the DATA buffers in the system. This would prevent from
us sending anything to the network.
Change this by splitting the DATA buffer pool into RX and TX
parts. This way RX flooding cannot consume all DATA buffers
that needs to be sent.
Change-Id: I8e8934c6d5fdd47b579ffa6268721b5eb3d64b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use context specific net_buf pool in echo-server and echo-client.
This will prevent application from allocating all available network
buffers in the system and thus preventing the core IP stack
functionality.
Change-Id: I3dbc64dd81c8a1165241426287a3530d00cbc7bf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using a more efficent entropy call and proper output data
Change-Id: I2ce71f63b6f22e5ceda79babd2eac802fa4bdf53
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Use the config name defined by the driver Kconfig in device
binding calls as that is safer because device name can change and
the app does not need to change.
Jira: ZEP-1764
Change-Id: I3c7716fd72e77c99fd29e4e90634c33f47f32e4c
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
- Ring buffers provide no concurrency control. Since the ring buffer
is being installed as the system log hook, multiple contexts may try
to write to it simultaneously. Lock interrupts to prevent corruption
of the ring buffer.
- NULL pointers were being passed into sys_ring_buf_get() for the
'type' and 'value' parameters, causing undesirable behavior when they
are dereferenced.
- The 'size32' parameter of sys_ring_buf_put() was being passed the
number of bytes, not the number of 32-bit words.
- The 'size32' parameter of sys_ring_buf_get() was not bring correctly
initialized the size of the destination buffer in terms of 32-bit
words. This has been fixed. There is no longer a need to query the
API twice.
Issue: ZEP-1789
Change-Id: I96f9cc74f3711297727b4c5114b6c93510f4a8c1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a sample application demonstrating doing continuous scanning and
sending out advertising packets periodically.
Change-Id: I0ce88afd73bed4928ba65472051c0f83ff27a632
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The introduction of device tree broke bluetooth sample builds for the
hexiwear_k64 and frdm_k64f boards. Add these boards to the peripheral_hr
test so this doesn't happen again.
Jira: ZEP-1745
Change-Id: I3e61a83db09cbb5834bd510bff851611e43844a8
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Makes configuration for tinyTile board.
Change-Id: I823e299dad905387de85fd6d74159c7540bc7edd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes following warning:
...
warning: format '%u' expects argument of type 'unsigned int', but
argument 6 has type 'int32_t * {aka int *}' [-Wformat=]
...
Change-Id: I3ac523b7c8daf08b0c8e7b43aad270306fe5d744
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
These were simply copied from the 'lcd' test case.
Issue: ZEP-1768
Change-Id: Ie5d561c3131b04df2952523cc8dfd5a004dc1960
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change to use the device config name defined by driver's Kconfig
for device binding, instead of hard-coding it which is not
portable.
Jira: ZEP-1764
Change-Id: I61ed7cfd97e20faad8f1e98dacef9384e8fefc73
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Change to use the device name defined by driver's Kconfig for
device binding, instead of hard-coding it which is not portable.
Jira: ZEP-1764
Change-Id: I0dc9aa2cdf426af71f1ed6dcef1ec7cec19f4c3e
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Change to use the device config name defined by driver's Kconfig
for device binding, instead of hard-coding it which is not
portable.
Jira: ZEP-1764
Change-Id: I7af234ada73302eb062340740df2fc7a8539150d
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Once all users of k_lifo migrate to k_queue this should no longer be
needed.
Change-Id: Ib8af40c57bf8feba7b06d6d891cfa57b44faad42
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes k_fifo functions rely on k_queue and port k_poll to use
k_queue directly.
Once all users of k_fifo migrate to k_queue this should no longer be
needed.
Change-Id: Icf16d580f88d11b2cb89e1abd23ae314f43dbd20
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix some style issues found at the src/main.c file.
Change-Id: I2023deb5ac4f31b2cf5d14d8313bbcfc03647898
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Move the client id define to config.h. Update the README file.
Change-Id: I1900c5e4f8c449e14279660d425501e86e07d409
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove the global bluemix flag and use a #define to set the
MQTT publisher topic and its parameters at compile time.
This change will save a few bytes and speed up computations.
Change-Id: I27bfc6b38c73d32c6105f1d506e147e9a5583097
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
It was assumed that the unit was microseconds, it is in miliseconds,
the same unit that is stored in the timeout field of the pending
transmission.
Change-Id: Ia99f363c7de4ec76a7ed229cb94a9964bcf609aa
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds retransmission support for confirmable responses sent by the
server.
Jira: ZEP-1732
Change-Id: I77c0c6375fa666e4cfdda4016ad1e0e90caf4ac9
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
It is possible that the buffer waiting for retransmission is modified
after it is sent, for example, it can be compacted by 6lo, and our
assumption of where is the message ID is located in the buffer is no
longer valid.
As the message ID is the only information that is necessary for
keeping track of retransmissions, we keep a copy of it in the pending
struct, as well as the destination address of the retransmission.
Change-Id: Id33d54353404628673541225a1a05e27ee08765f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This implements the /.well-known/core resouce and two children
resources (/core1 and /core2) so the link-format feature is better
explained.
Change-Id: I9dd8c69040c952c5d12a9987c1966a71b0257ef2
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds the resource necessary for the TD_COAP_OBS group of tests.
Change-Id: I33bd09910f74db90ad0d713e4479ab2e3ec343a5
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Add the resource for the TD_COAP_BLOCK_04 ETSI testcase.
Change-Id: Ied901db34ce79d3e1f7f8c7fd55bc398b1f88640
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The functions that retrieve net_buf will wait forever until a buffer
is available.
Change-Id: I03ddd1239f50fe4467e86e31c8fbfc9b05c8b190
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
- Let's build it with the various shell modules
- Make use of Kconfig.samples options
Thus: adding prj_server.conf and prj_client.conf to differentiate 2
instances of the app by their IPv6.
Then let's use samples/net/common/Makefile.ipstack
In the end, it is possible to build 2 times the samples this way:
make PCAP=154.pcap CONF_FILE=prj_server.conf server
and
make pristine
make CONF_FILE=prj_client.conf client
On client, or server, or both, shell commands can be used to ping each
other, check the statistics etc...
Once done, the given pcap file (154.pcap for instance) will have
recorded the traffic which can be parsed through:
wireshard 154.pcap
(Note: the "Malformed packet" warnings are not relevant, as the 15.4
frame FCS is a dummy one, it seems to make wireshark a bit lost)
Jira: ZEP-1774
Change-Id: I5590971660ecbfaac75af709124d59e1f98206fe
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
By default the net-tools package is expected to be located in
${ZEPHYR_BASE}/../net-tools directory. User can also specify
the directory using NET_TOOLS variable when running the make.
The net-tools package is located in this repository
https://gerrit.zephyrproject.org/r/net-tools
Change-Id: Ibccd7cabd567a630020fb9efbe1ec9e27b653b46
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit 81f85f4e4b.
Need a better solution for this, the patch itself does not solve any problem
and fails on many platforms that do not have I2C enabled.
Change-Id: I060e3d7a9992db8a1ece6da5e8d3a521f4052395
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the config name defined by the driver Kconfig in device
binding calls as that is more portable and safer because device
name can change and the app does not need to change.
Jira: ZEP-1764
Change-Id: If8c14dd4eb186bace863432d454c9122461f2f9c
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Use the config name defined by the driver Kconfig in device
binding calls as that is more portable and safer because device
name can change and the app does not need to change.
Jira: ZEP-1764
Change-Id: I3287da5c5a9df24507efa84bbf7bbb051726bc2c
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Use the config name defined by the driver Kconfig in device
binding calls as that is safer because device name can change and
the app does not need to change.
Jira: ZEP-1764
Change-Id: I5a3e16e10f7700ec12edbd07603808cd32f15755
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Instead of using a hard-coded device name in the device binding
call, use the config name defined by the driver Kconfig as that
is safer and the app does not need to change when the device name
is changed.
Jira: ZEP-1764
Change-Id: I99efc4bcae0d1acae70f7820f69dfffbe17510a6
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This commit updates the 802.15.4 example to work with the
nrf5 802.15.4 radio driver.
Change-Id: I8a4c80a21ebe29ce2616836b764c454979ebb2e9
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
This commit addes new configuration for examples which use
nrf5 802.15.4 radio.
Change-Id: I0c57334d071fb58bc2282feb3f4e6b949ce5d472
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Some files made it through review process with full license header.
Change-Id: I2722b127c40b4b19500042c12e4fde85a165bae9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a README.rst file to both echo-server and echo-client
sample applications.
Jira: ZEP-1539
Change-Id: I1ee1d02a3de0295697117f448d8e13f5b161e11b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently, for the following MQTT msg fields:
- client_id
- will_topic
- user_name
- topic
their length is computed inside the routine that receives the MQTT msg.
Although this simplifies development, also imposes one restriction:
data must be null-terminated. Sometimes, data is received from other
sources and not generated by the application, so the null-terminated
constraint may be considered problematic for the user.
This patch removes the assumption that string fields are null-terminated.
Current data structures are already prepared to handle this case, so no
API change is required.
Change-Id: I5a147a5b21e0da49541cbe62baac363c8737cd3e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add the QEMU x86 prj file to the MQTT publisher application.
Change-Id: I1ba8c3a3bf818d8f6dee7ea94021a83ba5277e5f
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This README file is no longer needed as we have separate
README files in various sub-directories.
Change-Id: I38d1c4208e373aa7aa23373149ef1b89fbcda094
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A sample application to illustrate the usage of crypto APIs.
This shows the usage of AES - CTR, CBC and CCM based encryption
and decryption.
origin: original
Change-Id: I17e4d966a70169b71a754c9cdc3f713a5d0c3ac0
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add the HTTPS (HTTP over TLS) server sample application on top
of the current HTTP Parser Library and mbedTLS. This code uses
TLS to stablish a secure connection and HTTP parser to identify
the request and the proper response.
Jira: ZEP-799
Change-Id: Ifbbcd0347bec47d12158440e50a82dc2966334d3
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Added conf files for qemu_cortex_m3, until a better solution
than CONF_FILE=prj_$(BOARD).conf exists in the makefile.
Change-Id: I1edc4f37bb3c49ecb65abf7c93b3c9f4608d601e
Signed-off-by: Richard Peters <mail@richardpeters.de>
Modify the network setup routine to accept the following parameters:
- network context
- accept callback
- server IP address
- server port
This change will allow us to reuse this routine for TLS.
Change-Id: I1fdbaa908783c69f87863cbc597b42f39358762c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the QEMU prj file for the HTTP server sample
app.
Change-Id: I0b910b5ec9970a7ffe9621e19d9544d899c22132
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add information about how to run libcoap's[1] implementation of the
ETSI testcases against zoap-server.
Jira: ZEP-1538
[1] https://github.com/obgm/libcoap (branch develop)
Change-Id: I6aa5989575cc15630371aa0761bee98fb6fe1b80
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This was reported by ISSM compiler.
Jira: ZEP-1179
Change-Id: Ib54d43bbfae4c7819b1e2b82d2931bfe1201ecce
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Binding of the device failed due to incorrect device name. Update
to use the correct device name.
Jira: ZEP-1704
Change-Id: I6ca23a439357592c9c974ca746bccc35e77d996d
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
These were reported by ISSM compiler.
Jira: ZEP-1179
Change-Id: Ic625749309773611c0c6ba2905e9420e98947dae
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Use new device name for SPI device
Jira: ZEP-1704
Change-Id: Iec39468bbef54423af2b3a681dd4ae1eee866d1e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Turn down the default logging verbosity on the dhcpv4 frdm_k64f config
to focus on the dhcpv4 implementation.
Change-Id: Ifb450181add653951517a7b128b11657ec2bab62
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The example entropy_source implementation should write entropy to the
output buffer rather than to the context pointer which in this example
happens to be NULL.
Take the opportunity to reorganize the entropy_source to use all of
the entropy provided by a call to sys_rand32_get() rather than just
1/4 of it.
The entropy_source() callback from mbedtls is given a maximum amount
of entropy to return, rather than a minimum amount. Hence it makes
more sense to deliver exactly one chunk (32 bits) of entropy from the
call to sys_rand32_get() per call and let the mbedtls entropy handler
worry about how much entropy we actually need to collect (ie the threshold).
Change-Id: I57ed438de5cb1223619fde0fb8039d6eca284646
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The kernel provides an API call to get the least signficant 32 bits of
system time, use it rather than reaching under the hood.
Change-Id: I98fabdcadfd0a4fe5ae10226dabf4e6d31e88df6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The kernel provides an API call to get the least signficant 32 bits of
system time, use it rather than reaching under the hood.
Change-Id: I9c303ef949f7670f2a2d9691c342e496873e96e6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Core stack is not removing the network buffer if app data length
is zero. So memory leak happening here.
Change-Id: I3d354b5e7008396ca7cb977631036871998165b4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using net_buf_unref() technically works but debugging the network buffer
allocations is more difficult if done like that.
Change-Id: Ib8e3f8b412c2f8388315c2f63cae4392f814ea2f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
size_t has different types depending on the arch selected for
building. Correct format identifier is %zu in this case.
Change-Id: I4388fcd8c5eb8bcd5997bb921bd80b4c2175b24c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Fix build break introduced in commit 6b013c4721c5
("net: nbuf: Add timeout to net_buf getters")
Change-Id: Iaa521c6a49ae740eaee5276936442ab8aa4c47ba
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit changes Kconfig prefix for ieee802154 drivers to
IEEE802154_*. This is done for consistency with config prefixes
used in other subsystems.
Change-Id: Ibbb4d96d2b748f4f13135bde85304ec34c5a90a6
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Set protocol family value only after the buf is verified
to be non-null.
Change-Id: I0ce7bab3539087d0f522b4bb3024f46a7eb3c15f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds a basic HTTP client sample application.
The following HTTP 1.1 methods are supported: GET, HEAD,
OPTIONS and POST.
This sample application does not define an API for HTTP,
for more information see ZEP-346.
Jira: ZEP-827
Change-Id: Iee63a53f2ef424964f040eba20326d648249fc24
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The README was referring to a specific version of the boot loader.
Since the boot loader version is expected to change in future
and Zephyr code would also correspond to that version, it is better
to not mention any specific version. Instead, the requirement
is to use the latest version of the boot loader.
Change-Id: I04082eec4af16426f6456702c521e8f61bd4e0df
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Add missing README.rst files to the last two samples.
Jira: ZEP-1540
Change-Id: I8dfa6489c6c65872594d4416870e2a41e701595d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reduce the pressure on the common RX buffer pool by reusing HCI
command buffers also for the Command Status or Command Complete
response to them. This also implies removing the existing Kconfig
variable for the command buffer sizes since the size is also dependent
on maximum Command Complete event sizes. Instead, reuse the RX buffer
size also for HCI Command buffers.
Change-Id: I006b287d64a0c9ca40de741aa9a424a49a927385
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reduce the accelerometer sampling frequency for polling mode.
So, cpu has more time to fetch the sample.
Also add some waiting time for the new frequency setting to
take effect.
Jira: ZEP-1532
Change-Id: If5c1d8a2b5f30b232a212f2775306ca397b9f80c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove CONFIG_GPIO from the prj config file. It is redundant.
Change-Id: Ife4301e7ce480a9002cadcddfd5eaa569900a391
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use a static buffer for sending UDP payload instead of reading
values from memory.
Change-Id: I037db5cd9b8784966d481c36e8cbe92d19760475
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Compiler was giving "Unused variables" warnings if IPv6 was
enabled and IPv4 was not, and vice versa.
Change-Id: I3b17534bb8bdef207512ea5b618e138edb420871
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP address and port number were incorrectly parsed if
user used udp.upload command.
Change-Id: Ib37d481012af5e186a1e342c92d10ddef9fe35b1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP address family was not set correctly when setting up
the connection. This lead to connectivity error in udp.upload
command.
Change-Id: I598ff2675f97e10e2033763a497f7583c94f3840
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add the HTTP server sample application on top of the
HTTP Parser Library.
This sample application is based on TCP and HTTP chunk
transfer code found at:
https://gerrit.zephyrproject.org/r/#/c/9977/
A README file with sample output and a detailed
description of this application is also provided.
Jira: ZEP-820
Jira: ZEP-1542
Jira: ZEP-1556
Change-Id: I649104a256190577000bbac118136d5bc21f83bf
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This enables these samples to interoperate with Linux 6LoWPAN over
Bluetooth implementation while that is being fixed, in the long term
we might remove it from the samples once Linux is fixed.
Jira: ZEP-1656
Change-Id: I8ca9fe5a27f43cebc75b6fe5a436a5e8fcee26d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The DNS client sample application was updated to use IP addresses
from the prj_*.conf files. This patch updates the README file to
reflect those changes.
Change-Id: Ic72510be8da208aef19fb188560221e1c2386457
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Fix references to Qemu section and references to boards.
Change-Id: Ib2174ff698d57d3272073eecc71209e047961aaa
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Copy the documentation from the Wiki over here, the cross linking
between online documentation and Wiki and duplication of information was
inconsistent and confusing. Put everything in one place.
Change-Id: Ia3aaec1b431477e2ec54dbec2ccaa655870b0ee3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It doesn't really make sense for GET requests to have payloads, we
shouldn't even be checking if they have any payloads.
Change-Id: I4bb8cccd6c733a5825c2ca5067a990937c7045a6
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
- Reorganize some CONF variables and add the CONFIG_NET_SAMPLES_xxx
variables to the DNS sample application.
- Remove all the numeric IP addresses
- Use the CONFIG_NET_SAMPLES_xxx variables to define the IP addresses
Change-Id: Ib294d338f163f03ea1b47143b489d916578c532d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
- Move the MAX_ADDRESSES macro to config.h.
Document the meaning and usage of this macro
- Delete unused defines
Change-Id: I035feb605611e564db15cba77d6a3dce8409ca18
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add the FRDM_K64F board to the DNS sample app testcase.ini
Change-Id: Iea8f7d09ed0d793711a5807f4bb67ed35ebf52c1
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds the MQTT Publisher sample application for Zephyr.
The following MQTT API routines are exercised in this sample:
- mqtt_init
- mqtt_tx_connect
- mqtt_tx_pingreq
- mqtt_tx_publish
- mqtt_tx_disconnect
The following MQTT API data structures are used in this application:
- struct mqtt_ctx
- struct mqtt_connect_msg
- struct mqtt_publish_msg
This sample application exemplifies how to send MQTT PUBLISH messages
with different QoS values.
A README file is also included in this patch.
Change-Id: I2b41b276d5178a2cd1b07b031c38bff481885fff
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Enable zperf code to support TCP using the native IP stack
when testing the network throughput.
Change-Id: I3e58754cfff65525ad15e63adf57f1ea22e4559d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When CONFIG_NET_DHCPV4 is selected, ignore the CONFIG_NET_SAMPLES_MY_IPV4_ADDR
setting and instead used DHCPv4.
NOTE: This commit also adds a placeholder for DHCPv6 behavior which is not
yet functional.
Change-Id: Id31fcb99be46e966babf18f94b5dec151920dedc
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When CONFIG_DNS_RESOLVER is active, the PEER config will be ignored and
instead a DNS query for DEFAULT_SERVER will be used.
Change-Id: If2c699944027f3c6a8ae9654f9cda0d7dca387c8
Signed-off-by: Michael Scott <michael.scott@linaro.org>
NOTE: You must set CONFIG_NET_IPV6=n in the project .conf file for
the CONFIG_NET_IPV4 setting to take effect.
Only 1 IP connection is active at a time. And when both are active
CONFIG_NET_IPV6 takes precedence.
Change-Id: I34a75f8d44db986810648d82a65d2ed29fc9a940
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Often IRC messages are split across multiple netbuf fragments.
Let's fix the message processing to account for this.
Change-Id: I3835af6adf337d27c28a0beeb72848dcc838772c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
