Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This sample tesecase provides sample code :-
1. Triggers Low Power tasks into nrf52 SOC (CONST LAT and LOW PWR)
2. Triggers System Off state.
3. Wake up device through port Event by GPIO (Button 1).
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This is similar fix as in commit 643cc4a22c but this one fixes
the thread parameter in UDP DTLS thread.
Fixes this function parameter datatype warning:
expected ‘k_thread_stack_t * {aka struct _k_thread_stack_element *}’
but argument is of type ‘u8_t * {aka unsigned char *}’
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The length and the start of the coap payload was not correct
because the received packet did not had IP and UDP header in place.
Fixes#4630
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Some "random" drivers are not drivers at all: they just implement the
function `sys_rand32_get()`. Move those to a random subsystem in
preparation for a reorganization.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Previously, post_write and execute callbacks returned 1 when handled
and 0 for error condition. However, this wasn't detailed enough and
the engine can't propagate any sort of error back to users -- so it
doesn't even check the return values in many cases!
Let's adjust the resource callback functions of all objects and the
lwm2m_client sample to return 0 for success or a valid error code.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that we can access resource data in the lwm2m subsys, let's use
the user provided firmware push buffer (5/0/0) to also store the
firmware pull data.
This way the size of the firmware pull buffer is completely up to the
application.
NOTE: This patch adds a 64 byte firmware buffer to the lwm2m_client
sample for this purpose.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that the LwM2M library can parse across multiple fragements,
let's remove the larger than normal buffer size setting.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Add configuration to http_server sample making it possible to work
with USB Device stack with Ethernet ECM protocol.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Given that 6lowpan/BLE support is still work in progress, uses
debugging interfaces to setup, has known issues, and otherwise
not widely known or adopted, provided detailed instructions,
including reasonable diagnosing steps on how to set up and test
such a connection.
Tested using 96b_carbon.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This reverts commit 1da0a9eebd.
The workaround caused a severe performance penalty, and only worked
for USB packets of 4-15 bytes in length (16+ byte packets weren't
subject to the hardware bug). Single-byte packets (very common for
cdc_acm serial port transfers) would still be duplicated sometimes.
The upcoming DMA implementation does not share the performance
penalty, and also is not subject to the bug for those sizes of packets
(though it DOES still have a problem with single-byte packets!).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If NET_L2_IEEE802154 and NET_IPV6 are enabled:
- NET_6LO is enabled
- NET_L2_IEEE802154_FRAGMENT is enabled
Thus removing setting this config options to yes where applicable.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is similar to the LPD8806 sample, but uses the WS2812 driver
instead. The app configuration is a bit more finicky, so try to
provide helpful references. This could be made more beginner-friendly
with the addition of timing diagrams, etc., but this should be enough
for an experienced developer to use.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This sample displays the colors red, green, and blue on consecutive
LEDs in an LED strip, moving the starting point where red begins
further down the strip at each time step. The color band wraps around
to the beginning when it reaches the end.
Since this is the first application in samples/drivers to have
documentation, add samples/drivers/drivers.rst as well, and include it
in the top-level toctree from samples/samples.rst.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Remove CONFIG_NET_L2_ETHERNET, as it's automatically set by the
board. This effectively makes prj_frdm_k64f.conf fairly portable,
e.g. the same config can be used for frdm_kw41z whcih uses 802.15.4
connectivity instead.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
LwM2M is intended for constrained devices. The default samples
settings are quite large by that standard and can be reduced to
reflect actual usage.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
After the LwM2M sample was introduced several HW related defaults were
added to Kconfig. We no longer need separate prj*.conf files for K64F
and qemu_x86. Let's combine them into a single prj.conf file and
adjust documentation.
NOTE: This also adjusts README.rst
Signed-off-by: Michael Scott <michael.scott@linaro.org>
We removed the default values for:
* CONFIG_USB_DEVICE_VID
* CONFIG_USB_DEVICE_PID
So put some dummy values in the sample.yaml to get things building
again.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes this function parameter datatype warning:
expected ‘k_thread_stack_t * {aka struct _k_thread_stack_element *}’
but argument is of type ‘u8_t * {aka unsigned char *}’
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The relay functionality was supposed to be always enabled rather than
always disabled on the micro:bit.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The IEEE 802.15.4 UART pipe config files in
echo_server/prj_qemu_802154.conf and echo_client/prj_qemu_802154.conf
did not had proper configuration options set. This prevents
qemu<->qemu communication between the echo-server and echo-client.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use platform_whitelist to specify supported boards to make sure
mem_domain_apis_test sample will be built during sanitycheck.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
Vendor ID and Product ID should be assigned on build time by
respective process.
For sanity check we assign some random values which are only used for
build tests and should not be used for real products.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It's been observed that that the relay toggling functionality is not
very useful, and that it's better left enabled always. Change the
purpose of the second button to instead modify the target address that
messages sent through the first button get directed to. By default the
destination is the group address, i.e. all nodes receive the message.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This sends out 2KB+ payload (i.e. guaranteedly more than 1 network
packet). When this sample was initially written, using such payload
quickly let to a deadlock somewhere in the network stack. However
as of now, running with such payload can sustain testing with
"ab -n10000" (10000 consecutive HTTP requests using Apache Bench),
so set is as a default, to serve as a mark point against possible
future regressions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Applications may want to be notified when various events
happen in the LwM2M rd client. Let's implement an event
callback which sends: connect, disconnect and update events.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
1. Add handling block1 option in handle_request(). The basic idea is
to declare structure block_context at compiled time and use "token"
as a key to pick up the on-going block cotext. It should be able to
support multiple blockwise transfer concurrently
2. Use write callback implemented in lwm2m_obj_firmware to deal w/ the
update state transition and than call the callback registered by the
application
3. move default_block_size to lwm2m_engine.c to share between
lwm2m_engine and lwm2m_obj_firmware_pull
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: rebased on LwM2M net_app changes.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
1. Parse firmware pull URI
2. Add lwm2m_firmware_get/set_update_cb() for application to register
callback. This is because we want to check the update_state before
we pass to the application
3. Add lwm2m_firmware_get/set_update_result() and
lwm2m_firmware_get/set_update_stat() to manage the state transition
as well as the sanity check
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: rebased on net_app framework and
lwm2m_message refactoring.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This application does not do anything itself, it just waits
mDNS queries and responds to them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, there was boolean CONFIG_SLIP_DEBUG, which effectively
switched between "logging off" and "debug-level logging". Instead,
switch to CONFIG_SYS_LOG_SLIP_LEVEL (the naming of the option follows
existing conventions) which allows to select any of the standard 5
logging levels.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Explicitly call net_pkt_ref()/net_pkt_unref() to avoid packet being
freed after calling net_context_sendto() at retransmit_request().
Also, do not return when net_context_sendto() returns error. Instead,
we should keep retrying.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Original coap_client implementation does not setup "appdatalen" of
net_pkt correctly and does not strip the IP + UDP headers when doing
the retransmit. This will result in malformed coap packet. Fix it by
adding a strip_headers() function to set appdatalen and get rid of
IP + UDP headers.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
This helps to debug issues with mass connection handling (e.g. when
issues happen at ~500th connection).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. After calling sendto(), the packet will be unreferenced.
Call coap_pending_cycle() to make sure the packet is referenced until
we got the response from the peer or retransmission timeout.
2. In retransmit_request(), we rearrange the order to avoid the issue.
3. Remove IPv4 configuration for source code is expecting IPv6
4. Correct a typo in README.rst
5. Initialize the interface w/ IPv6 address
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
When testing against etsi_coaptest.sh, test cases TD_COAP_BLOCK_03/04
will get stuck. This is because these testcases send out a blockwise
transfer but with an empty payload. Although this should be a legit
request, large-update/create handlers did not check "MORE" flag in
block1 option and always return an error when request comes with empty
payload.
Corrected as below
1. Initialize coap_block_context when first block arrives.
(SIZE1 option is not always available. In the case that SIZE1 is
unavailable, the zoap_block_context will be re-initialized each time
a new block has arrived)
2. Check "MORE" flag of block1 option. If it's the last block, then
an empty payload should be allowed.
3. Response w/ 2.04 CHANGED when the last block has arrived for
large-update
4. Response w/ 2.02 CREATE when the last block has arrived for
large-create
5. Remove adding block2 option to the response since we are not sending
back any data to the caller
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Keep the flash shell up to date with the latest flash driver updates.
- Get the driver name from soc.h
- Add a write_block_size command
- Implement flash_shell_page_layout() using flash_page_foreach()
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
At 32 bytes the snprintk call to fill the help buffer was most often
running out of room and returning an error. Let's expand it to 64.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Users can private message the bot and the bot should respond directly
back to that user rather than rudely ignoring them.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's create a static global var for nickname so that we can use it
later without having to pass it all the way through callbacks, etc.
Also limit the size to 16 bytes as IRC servers will truncate anything
beyond.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
These structures were originally intended to prototype an IRC library
which would be later moved into the subsys/net/lib/irc folder.
Unfortunately, that effort has faded and they make this code much more
complex than necessary. Let's remove them in favor of simplicity.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
For style points let's declare the text shown at the beginning
of main() function to the top of our source as APP_BANNER so that
it's obvious and presents nicely.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's simplify the parsing function which scans incoming traffic
for carriage returns and let the net_pkt_read() function cross
multiple buffers if needed. Also, gracefully skip lines which
are longer than the command buffer.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Some L2 layers such as bluetooth need to have extra buffer pools to
hold copies of packets for use with TCP. Let's add support for that
so that future enablement of other boards won't get bitten.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's migrate from using NET_LOG_* functions to the SYS_LOG
facility which allows for granular control over the display
of info, debug and error messages unique to the file that
you're in.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's remove all of the extra coding to handle DHCP, DNS and event
management. This is all handled by the net_app API.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
It's useless now, arduino_101 has proven not working very well with x86
gpios and CC2520 never got to work properly there.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only ieee802154 should have been using it, but it ended in various
samples that did not require it anymore once they've been using
net_app. Unlike former samples settings, net_app settings are tied to
net_app, so let's just forget about all of it and silently use net_app.
If something goes wrong in setting net options, it will be a unique
place.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This app now depends on net_app API, so it must be enabled for all
project configs we have.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
From section 3.4.5.3 in the Mesh Profile Specification 1.0:
"A node shall implement a Local Network Interface."
Removing the Kconfig option also helps clean up quite a lot of code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was causing only one byte of data to be placed in timeout
instead of sizeof(timeout) as intended.
Coverity-CID: 170744
Fixes#4057
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's dumb, because it doesn't really parse HTTP request, just always
sends the same page in response. Even such, it's useful for socket
load testing with tools like Apache Bench (ab) and for regression
checking in the net subsystem.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
CONFIG_NET_L2_BT_ZEP1656 shall only be used with hosts that are known to
not comply with RFC 7668.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CONFIG_NET_APP_BT_NODE is required in order for the Bluetooth L2 driver
to register IPSS service.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Composite multifunction USB devices should be able to know about
configuration change, implement it through existing callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add information that IP addresses in prj_qemu_cortex_m3.conf file for
echo_client are set that qemu<->qemu communication could be tested.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
When TCP connection over IPv4 could not be established there was
an error about TCP connection over IPv6.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
This file is no longer needed as IPSS service is already enabled with
CONFIG_NET_L2_BT.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is the final stage of moving the LwM2M library internals to
the net_app APIs. This means we can support DTLS and other
built-in features in the future. All of the logic for
establishing the network connection is removed from the sample
app.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The LwM2M library does not use net_app APIs internally. To help
this effort let's establish a user facing structure "lwm2m_ctx"
(similar to http_client_ctx and mqtt_ctx) and start it off by
wrappering the net_context structure.
Future patches will add user setup options to this structure and
eventually remove the net_context structure in favor of a net_app_ctx.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The DNS resolver example enables mDNS client support and then
queries zephyr.local hostname. The net-tools project has example
avahi-daemon script that will response these .local queries and
can be used in testing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Whenever a buffer is sent to the driver via bt_raw using bt_send() the
buffer might not be consumed if an error is returned. In that case
unreference the buffer to avoid leaking the already allocated net_buf.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Currently, we don't have a .conf which enabled BT. This will be
re-enabled at some future date after migrating to the full net_app
APIs by setting CONFIG_NET_APP_BT_NODE=y.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
There were bunch of config options in tests/net, net-shell and
wpan_serial sample, and those options had wrong name so they
were ignored by the code.
Fixes#1428
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a simple shell module that allows arbitrary boards with flash
driver support to explore the flash device.
- Reading, erasing, and writing by device offsets are supported in all
cases.
- If the flash page layout is available, it can be printed, and I/O
can also be done to a specified page as well.
One known issue is that writing to flash on targets that require
doubleword-sized writes (e.g STM32L4) will fail since the number of
arguments required exceeds ARGC_MAX in shell.c. Addressing that is
left to future work.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Added sample code for testing and displaying the flash layout using
the recently introduced API.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
bbc_microbit has been observed to regress on this sample and is
therefore a good candidate for CI.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
To test BMM150 geomagnetic sensor driver in polling mode,
sample application added by this patch can be used.
Signed-off-by: Punit Vara <punit.vara@intel.com>
The IP header was stripped by _net_app_ssl_mux() when it received
IP packet. This is fine but if the application expects the get
the IP header, then there is a problem. Fix this by saving IP
header to ssl_context and then putting it back in front of the
packet when the data is passed to application.
Note that this IP header is not used by net_app when the packet
is sent because TLS/DTLS creates a tunnel for transferring packets
and user can only sent packets via this tunnel.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The default IPv6 multicast address count was too small,
increasing addresses to 5.
Jira: ZEP-2560
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-server sample was using removed net_app_server_tls_disable()
function, the correct one is called net_app_server_disable()
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The stack name was incorrectly specified in mqtt_publisher sample
application, this cause compilation error when certain Kconfig
options were specified.
Jira: ZEP-2566
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The server needs global enable/disable status instead of only being
able to enable or disable just the TLS server part.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The main reason is allowing to run on 6LoWPAN devices, though also to
demonstrate IPv6 support with BSD Sockets in general.
Tested on 96b_carbon.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
POSIX requires struct sockaddr's field to be named "sa_family"
(not just "family"):
http://pubs.opengroup.org/onlinepubs/009696699/basedefs/sys/socket.h.html
This change allows to port POSIX apps easier (including writing
portable apps using BSD Sockets compatible API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Normalizing variables names and make sure tag handling behavior, which
might be different among backends, does not make the test failing.
Also, improving debug logs in case of error.
Change-Id: Ic317948aab459bfa75c9a72ac48cb2d12a0d0706
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the encryption/decryption failed there is no need to procceed
further.
Change-Id: If450e40ed6fd601b698b74c56ae21fc7f903d087
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is how it's called in the main docs, so use this same phrase in
Kconfig and samples too.
Also, added some articles to docs.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Default BT_RX_BUF_COUNT value is not enough when transfering a large
amount of data (e.g. heavy network traffic over BT 6LoWPAN). Increase
BT_RX_BUF_COUNT from default value 3 to 10.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Be sure to check for NULL pkt in receive callback, which means TCP
EOF. The fix ported from echo_server sample.
Jira: ZEP-2423
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
C++ standard mandates that main() return an 'int' even though
Zephyr does not use it. Fix build error with XCC compiler.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add cross-referenced information on the 96b_carbon and
96b_carbon_nrf51 pages which disambiguates between the two "boards".
Also describe how to flash 96b_carbon_nrf51 with
samples/bluetooth/hci_spi and 96b_carbon with samples/bluetooth/ipsp
to support a Bluetooth HCI stack on 96Boards Carbon (the physical
board).
While we're here, make the documentation page for 96b_carbon match the
format in doc/templates/board.tmpl.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Various of the printk messages in this sample app don't have
newlines. Let's fix the output by moving to SYS_LOG_xxx() macros
instead, which don't need them anyway. This also makes it easier to
tell errors apart from other messages, etc.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add a sample application that allows a Zephyr-based Bluetooth
controller to interface with an HCI driver via SPI. This sample
implements the same BT SPI protocol already as Zephyr's HCI SPI
driver.
Currently, the sample only supports the legacy SPI API.
Provide a single configuration file, avoiding board-specific
files. Some board-specific configuration information must be provided
via other means:
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_DEV_NAME
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_IRQ_DEV_NAME
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_IRQ_PIN
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Per ZEP-1958, Phase 2 of adding CC3220sf LaunchXL support,
was to "deprecate the CC3200 launchxl support in Zephyr
(redundant to the CC3220)."
Effectively, the CC3220 SOC replaces the CC3200.
This patch removes the following:
* the imported CC3200 SDK
* CC3200 SOC, board, DTS files.
* adjusts other files where cc3200 was mentioned.
Also, it fixes explicit references to CC3200 in generic
CC32xx driver files.
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Rename the BT_CONTROLLER prefix used in all of the Kconfig variables
related to the Bluetooth controller to BT_CTLR.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The documentation says that the API will automatically append the
net_buf fragment to the end of network packet fragment chain.
This was not the case and current only user for this API in
echo-server sample appended the fragment itself. The fix is to
automatically append the fragment to the end of fragment chain.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The hexiwear_k64 board can drive the leds with a pwm, so update the
rgb_led sample to work with this board.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The hexiwear_k64 board can drive the leds with a pwm, so update the
fade_led sample to work with this board.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The hexiwear_k64 board can drive the leds with a pwm, so update the
blink_led sample to work with this board. Reduces the maximum blinking
frequency from 500 Hz to 64 Hz because your eye can't distinguish these
higher frequencies (the led appears solidly on). Increases the minimum
blinking frequency from 0.5 Hz to 1 Hz because the mcux pwm driver can't
handle frequencies less than 1 Hz.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Following test changes, log info have changes and previous log info
with stack guard present shows an mpu error not caused by a stack
overflow caught by mpu stack guard feature.
Signed-off-by: Michel Jaouen <michel.jaouen@st.com>
This test launches several threads. Only last thread will overflow the
stack and an mpu exception will occur. The other threads are regulary
suspended, this triggers access to kthread structure. This tests is
failed on st and nxp platform, if 32 bytes alignement is not set.
Signed-off-by: Michel Jaouen <michel.jaouen@st.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit adds IPSO temperature support to the LwM2M client sample.
NOTE: A dummy value of 25C is set during initialization and does not
change.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This sample utilizes the new LwM2M library by setting up default
values for LwM2M device and firmware objects and then establisting
a connection to a LwM2M server (for example Leshan Demo Server) via
the registration interface.
To use QEMU for this purpose please see:
doc/subsystems/networking/qemu_setup.rst
NOTE: This sample currently does not demonstrate DTLS/bootstrap as
neither of these is supported by the LwM2M library.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When unicast IPv6 address is added to network interface, it is
possible that the return value is NULL (if all the address slots
are already occupied).
Coverity-CID: 157607
Jira: ZEP-2467
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds a configuration file that tests Flash writes with MPU
enabled.
[david.brown: Put options in prj.conf with comments as per review
feedback]
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: David Brown <david.brown@linaro.org>
The parsing of strings with sharp notes (e.g. "100C#") was incorrectly
implemented. Now it should be correct. Additional benefit is that this
should fix Coverity CID 173632.
Jira: ZEP-2467
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The IEEE 802.15.4 settings are applied automatically by
net_app_init() function is is enabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Don't call net configuration explicitly, instead rely on net_app
auto init service.
Thus, the only difference between POSIX and Zephyr versions of these
samples are different include files. The application code is 100%
the same.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The led demo does not even enable Bluetooth by default, and in case a
custom enables it shall use CONFIG_NET_APP_BLUETOOTH_NODE.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sample can be used to test ambient light, RGB and proximity
functionality of APDS9960 sensor in polling mode.
Remove old sample which is not using sensor API.
ZEP-1552
Signed-off-by: Punit Vara <punit.vara@intel.com>
ReST defines interpreted text roles where text enclosed by single quotes
can be "intrepreted", for example :ref:`some name` becomes a link to
a label anywhere in the doc set named "some name", :c:func:`funcname()`
becomes a link to the API documentation for "funcname", and
:option:`CONFIG_NAME` becomes a link to, in our case, the documentation
for the generated Kconfig option.
This patch fixes uses of `some name` (without a role) by either adding
an explicit role, or changing to ``some name``, which indicates inline
code block formatting (most likely what was intended).
This is a precursor to changing the default behavior of interpreted
text to treat `some name` as :any:`some name` (as configured in
doc/conf.py), which would attempt to create a link to any available
definition of "some name".
We may not change this default role behavior, but it becomes an option
after the fixes in this patch. In any case, this patch fixes incorrect
uses of single-quoted text (possibly introduced because GitHub's
markdown language uses single-quoted text for inline code formatting).
Jira: ZEP-2414
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Count of 4 seems to cause deadlocks with some Android phones due to
other GATT activity in addition to Mesh related data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert echo-client to use DTLS for UDP connections if DTLS
is enabled by prj.conf file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
