Still need a better way to filter and a better way to support multiple
platforms with these tests, but for now we remove the build_only tag and
make it depend on real HW.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The following 3 testcases are blacklisted for the POSIX
arch / simple_process BOARD:
* tests/drivers/ipm : won't compile due to missing
__stdout_hook_install() [part of minimal libc]
(POSIX arch uses the native libc)
* tests/kernel/mem_protect/stackprot : will crash
"natively" when trying to corrupt the stack and therefore
will fail the testcase. The current understanding is that
the POSIX arch should let the native OS handle faults,
so they can be debugged with the native tools.
* samples/cpp_synchronization : it is not possible
to build cpp code yet on top of the posix arch
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
It is only necessary to link with subsys__bluetooth if the path
"subsys/bluetooth" is needed as an include directory. None of the
samples have this need.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The CoAP samples use an MBEDTLS config "config-coap.h" which could be
re-used by the LwM2M sample, except that most servers use a larger
maximum content length setting of 1500 bytes.
Let's add a CONFIG to set this for users of the CoAP lib and set the
CONFIG value for the samples to the 256 size currently used.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
- Mention the prj_dtls.conf setting
- Explain setting up security in the Leshan Demo Server web UI.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Signed-off-by: Steve Brown <sbrown@cortland.com>
---
The updates to BlueZ' meshctl have not been submitted.
I am submitting this PR only for review. It could be committed
after the patches for the meshctl commands are applied.
The CMakeLists.txt file was reading ${BOARD}, but this means the user
must set BOARD like this cmake -DBOARD=foo. The user must be allowed
to set BOARD from the environment.
The code was unnecessary anyway because the convention
prj_${BOARD}.conf is known by boilerplate and therefore not necessary
to specify.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This introduces an nrf build to CI for the echo_server sample. Doing
so ensures that https://github.com/zephyrproject-rtos/zephyr/pull/5018
cannot regress again.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When exporting flags to an external build system we need to deal with
the fact that we sometimes use generator expressions. Specifically, we
use generator expressions that look like this:
$<$<COMPILE_LANGUAGE:CXX>:-fno-exceptions>
This patch replaces the old API with a new one where users can ask for
compile options for specific languages, like this:
zephyr_get_compile_options_for_lang_as_string(CXX x)
The existing API would have either crashed or silently omitted flags
when a COMPILE_LANG generator expression was present.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The following files didn't have any copyright or license headers on them
when they got contributed. So add the SPDX Apache license and
appropriate copyright info:
boards/arm/stm32l476g_disco/pinmux.c
samples/basic/threads/src/main.c
tests/net/socket/tcp/src/main.c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This makes it possible to pass all IV Update tests without having to
build a custom configuration for some of the tests. We also disable
the feature in all sample configurations, but leave it on in the
tests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The echo-server compilation failed because mbedtls config file
was not found. Added suitable magic to CMakeLists.txt fixing that.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When sending TCP sample packet, just fill the packet to max and
ignore any overflow error.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Check that we do not try to access fragment when UDP packet is
received if pkt is NULL. In practice this should not happen for
UDP but do the checks in proper order anyway.
Coverity-CID: 179252
Fixes#5057
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we are checking that pkt is not NULL already in the start
of the function, remove the checks later in the code in function
zperf_tcp_receiver.c:tcp_received()
Coverity-CID: 179248
Fixes#5061
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This app isn't (at least yet) using the model publication for
anything, and in fact this could cause trouble due to missing
publication net_buf_simple buffer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The only generally available model supporting publication that's
convenient to be used for testing is the Health Server Model.
Unfortunately since this model supports period publication, the
non-periodic side got less attention and had some bugs.
The first thing that needs to be done is to verify that the period
returned by bt_mesh_model_pub_period_get() is positive. If it's zero
then no periodic publication should take place.
Another thing that this patch cleans up is the naming of the callback
used for periodic publishing. There's no need do require the callback
to call bt_mesh_model_publish() since this must happen no matter what,
so instead rename the callback from 'func' to 'update' and have the
access layer call bt_mesh_model_publish() if the callback was
successful.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The echo-client compilation failed because mbedtls config file
was not found. Added suitable magic to CMakeLists.txt fixing that.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Model publication was broken in a couple of ways:
- The Publish Retransmit State was not taken into account at all
- Health Server used a single publish state for all elements
To implement Publish Retransmit properly, one has to use a callback to
track when the message has been sent. The problem with the transport
layer sending APIs was that giving a callback would cause the
transport layer to assume that segmentation (with acks) is desired,
which is not the case for Model Publication (unless the message itself
is too large, of course). Because of this, the message sending context
receives a new send_rel ("Send Reliable") boolean member that an app
can use to force reliable sending.
Another challenge with the Publish Retransmit state is that a buffer
is needed for storing the AppKey-encrypted SDU once it has been sent
out for the first time.To solve this, a new new net_buf_simple member
is added to the model publication context. The separate 'msg' input
parameter of the bt_mesh_model_publish() API is removed, since the
application is now expected to pre-fill pub->msg instead.
To help with the publishing API change, the Health Server model gets a
new helper macro for initializing the publishing context with a
right-sized publishing message.
The API for creating Health Server instances is also redesigned since
it was so far using a single model publishing state, which would
result in erratic behavior in case of multiple elements with the
Health Server Model. Now, the application needs to provide a unique
publishing context for each Health Server instance.
The changes are heavily intertwined, so it's not easily possible to
split them into multiple patches, hence the large(ish) patch.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Increase sleep time for main thread (1 sec to 1 minute) to keep SOC
in Low Power State for longer time. Currently nrf SOC is entering into
low power state and exiting immedately after 1 sec.
With this change SOC will wake stay in Low Power State till GPIO is
pressed or sleep time expired (whichever is earlier).
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Add basic documentation about Ethernet over USB and describe
prj_netusb.conf configuration file.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
As per https://tools.ietf.org/html/rfc7230#section-3.3.2:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For an unknown reason, various samples in KBuild were including
Makefile.test, this had some desired benefits, one of which is that
the popular BOOT_BANNER appears. The CMake-equivalent of including
Makefile.test is setting the flag IS_TEST. This commit reverts the
behaviour of the samples back to how it was pre-cmake.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
The Kbuild equivalent of IS_TEST was used for hello_world before, so
we revert back to the old behaviour. This resolves
https://github.com/zephyrproject-rtos/zephyr/issues/4904
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
CONFIG_NET_L2_BT_ZEP1656 should only be used with older Linux up to
4.11 which by now should have been updated in all distros.
For those sticking with older distros should select it manually as
it does breaks IID address it should never be used in production.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Added conditionally enabled event state tracing support.
Needed for enhanced debug visibility of tight timed events where
normal print debug messages affect the timing of things. This is a
simple buffer that allows post analysis via gdb of what sequencer
events occurred.
Signed-off-by: David Leach <david.leach@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Removed some debug output and changed the level of others to reduce
the amount of information logged. The reason is that some of this is
causing false positive distractions.
- Removed enabling of FILTER error IRQ events. It isn't needed and is
only informational.
- Changed frame control AR bit inspection to use native retrieval
routine.
- Addressed some coding style issues.
Signed-off-by: David Leach <david.leach@nxp.com>
- Reworked the driver logic around TX/RX to correctly handle the
expectations of the underlying 802.15.4 hardware IP.
- Fixed a problem with TX always reporting an error to the stack
which resulted in constant retries.
- Fixed bug in RX to TX transition which would occasionally cause the
driver to error the TX.
- Changed RX logic to ensure that invalid RX frames were not passed up
the stack.
- Simplified hardware timer usage to only use TMR3.
- Added RX watermark and TMR3 support to fix a hardware problem where
the hw IP can get stuck on a receive in noisy environments.
- Modified samples/net/echo_client and echo_server kw41z project config
files to provide enanced debug visibility into stacks and threads.
Signed-off-by: David Leach <david.leach@nxp.com>
It may be useful for the app to know what the initial NetKeyIndex that
it was given during provisioning is.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is in anticipation of soon adding health client support, which
could then cause confusion due to the ambiguous API names.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that there's support for configuration client as well, rename cfg
to cfg_srv to avoid any confusion.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some of the provisoning routines, such as node reset assume that we
have a valid bt_mesh_prov pointer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the ability to track the provisioning bearer through an extra
parameter to link_open/close. Also introduce new public functions to
enable/disable specific provisioning bearers. This also means that one
now needs to explicitly enable provisioning bearers after calling
bt_mesh_init().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It is possible to access past end of url buffer by one byte.
Coverity-CID: 178790
Fixes#4784
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In http_request() a CRLF is added to the header information after
the protocol is added. 2 CRLF in a row means the header information
is done, so following header information will be ignored.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
All current socket samples as one of the points show portability to
POSIX platforms, and provide POSIX makefiles to let user build such
a version of application easily. These Makefiles were lost during
CMake conversion.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
KBuild would write the .inc file to the source directory, this was
changed during the CMake migration because whenever possible it should
be avoided to write files outside of the build directory.
But Makefile.posix assumes that these files are generated in the
source directory so we need to keep generating them there for now.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Avoid applications defining empty model arrays by themselves by
documenting the BT_MESH_MODEL_NONE helper macro (renamed to be more
intuitive) and using it in the mesh sample app.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the sample README with the latest changes during the
1.10 development cycle. We removed the 2 concurrent IPv4
and IPv6 connections and now the sample will make a single
connection based on whatever is configured (currently IPv6
takes precedence over IPv4).
Added instructions for how to switch the sample to IPv4.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The QEMU_NET_STACK is enabled automatically if building
a networking application to QEMU so no need to do it for
each networking sample.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the documentation for the Bluetooth samples not to refer to the
old style of building using make. Instead, simply refer to the general
instructions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename netusb project file to be more general and support sanity build
for 96b_carbon board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
