dmas and dma-names properties could be used by a wide range
of potential dma client, hence put them in base.yaml, as
optional properties.
Since current stm32-i2s driver implementation only support
dma, set these properties as required.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit updates the west.yml to point to the CMSIS module commit
that updates the CMSIS version to 5.7.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Pun all workqueue tests under 1 doxygen group.
This removes kernel_workqueue_triggered_tests and
kernel_workqueue_delayed_tests doxygen groups.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Those are used only in tests, so remove them from kernel Kconfig and set
them in the tests that use them directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The last user of the .conf file format DTS data has been removed. We
can now remove the generation and associated support for the .conf file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The variables passed by sanitycheck and west were being ignored because
cmake knows nothing about them.
Fixes#24178
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the UNALIGNED_GET() macro instead of the
flash_sam0_read_unaigned_u32() function to ensure
word alignment of the source address.
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
drivers: flash: sam0: fix whitespace
Fix checkpass whitespace error.
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
At least one flash driver requires that the source and destination
buffers be word-aligned. Annotate the synthesized definitions to make
sure this happens.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Disable power management for boards mec15xxevb_assy6853 and
mec1501modular_assy6885 on latency_measure test. This prevents
the SoC from sleeping which may skew the results. Also this
prevents stopping mid-test due to SoC being in sleep state,
and there are no external interrupts to wake up the SoC.
Fixes#24136
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Disable power management by setting CONFIG_SYS_POWER_MANAGEMENT=n
for this test. This is to prevent power management from
interfering with latency measurement.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If there is an error in the CMake configuration phase (this can happen
if a script run using execute_process() fails, for instance), the
build system is incompletely generated and future attempts to run
'west build' will fail. This manifests in the following error:
Error: could not find CMAKE_PROJECT_NAME in Cache
Whenever we see that the cache exists but this variable is missing,
let's just force CMake to run again. This avoids the error in my
testing and is a bit more user friendly. I've seen multiple users
asking what to do in this situation; the answer is always "just build
it again", so we might as well do it for them.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Commit c408fa88a3 introduced changes
to the BUILD_ASSERT() macro so the MSG argument is optional.
However, in include/toolchain/common.h, the BUILD_ASSERT()
definition has not made the MSG argument as optional which results
in build errors complaing about too few arguments. Fix by adding
some dots there.
This is observed when using XCC (based on Clang 3.9).
Fixes#24008
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Sometimes you are only interested in doxygen, so need to wait 10 minutes
for everything to generate in this case. Now just do:
make doxygen
and get only the doxygen output.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replace DT_I2C_._NAME macro with DT_LABEL(DT_NODELABEL()) instead. This
will allow us to remove all references to DT_I2C_._NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace DT_I2C_._NAME macro with DT_LABEL(DT_NODELABEL()) instead. This
will allow us to remove all references to DT_I2C_._NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace DT_I2C_._NAME macro with DT_LABEL(DT_NODELABEL()) instead. This
will allow us to remove all references to DT_I2C_._NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a property to the openisa,rv32m1-gpio binding that relates the GPIO
node to the pinmux PORT node.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Per instance Kconfig symbols aren't used by the rv32m1 lpspi driver
so remove the unnecessary setting of PWM_2.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST macros and remove related board per
instance Kconfig symbol usage.
Updated the openisa,rv32m1_vega-pinmux binding to require the label
property and updated the rv32m1.dtsi to add label properties for the
pinmux nodes.
Also update gpio_basic_api test to use DT_NODELABEL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a helper macro that will go from a DT_DRV_INST number and return the
clock_ip_name value for that instance.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move board pinmux.c code to utilize
DT_NODELABEL instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move soc.c code to utilize DT_NODELABEL
instead.
Also rename various node labels to match the SoC docs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In arch_irq_connect_dynamic the 'level' variable is only used on
platforms that define CONFIG_RISCV_HAS_PLIC. For the other platforms
we'll get a warning about an unused variable. Remove the need for
'level' and just call irq_get_level() where its needed to address the
issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ext/hal/cmsis was moved out of the ext folder and into external modules
so we should remove the licensing exceptions noted in this document.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Don't assume in the soc level device trees that flexcomm nodes will
always be configured as spi. Instead, configure flexcomm nodes at the
board level for lpcxpresso55s69 and lpcxpresso54114 boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Don't assume in the soc level device trees that flexcomm nodes will
always be configured as usart. Instead, configure flexcomm nodes at the
board level for lpcxpresso55s69 and lpcxpresso54114 boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Don't assume in the soc level device trees that flexcomm nodes will
always be configured as i2c. Instead, configure flexcomm nodes at the
board level for lpcxpresso55s69 and lpcxpresso54114 boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The flexcomm peripheral on lpc socs can be configured into uart, spi,
i2c, or i2s mode. Introduce a shared device tree binding that gets
included by the more specific driver type bindings.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
