Attempt to deinitialize an nrfx driver that is not initialized results
in an assertion failure reported by the driver. And such attempt could
happen in SPI shims when the power state was switched between states
other than ACTIVE.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Ring buffer in memory backend does not depends on xtensa adsp board,
so make it general: remove to log_backend_rb and remove dependency on
up_squared_adsp.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now the VEGABoard BLE support includes the support for
the 2 Mbps BLE PHY, so the docs need to be updated
accordingly.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This patch adds the selection of the necessary CONFIG_*
options for allowing the use of the 2Mbps BLE PHY on
VEGA platform.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
The radio on the VEGA platform supports both 1Mbps, as well
as 2Mbps BLE PHYs. It does not support coded BLE PHY. This patch
adds the necessary callback, as well as timings to enable the 2 Mbps
PHY support in the SW LL HAL for VEGA.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Add command to input the legacy pairing OOB TK during the pairing
procedure.
Fixed shell build with CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY defined.
Print error code when passkey input failed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY option that completely disables
all legacy and SC pairing modes(except for Out of Band) and frees the
memory previously used by these.
Added CONFIG_BT_SMP_DISABLE_LEGACY_JW_PASSKEY option that force rejects
pair requests that lead to legacy Just Works or Passkey pairing.
Signed-off-by: Iván Morales <ivan98ams@gmail.com>
LPC55S69 CPU1 definition added.
Dual Core is not enabled!
Definitions related to dual core split of SoC's CPUs.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Provide a rule to settle on MPU activation by default.
Request is to activate it by default if board resources allow.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Once the MQTT ping response has been received from the server, the
application is then notified with the MQTT_EVT_PINGRESP event.
Signed-off-by: PK Chan <pak.kee.chan@nordicsemi.no>
There are scenarios where there is a NAT firewall in between MQTT
client and server. In such case, the NAT TCP timeout may be shorter
than MQTT keepalive timeout and TCP timeout. The the MQTT ping
request message is dropped by the NAT firewall, so that it cannot be
received by the server, resulting in void MQTT ping response message.
There is no TCP FIN or RST at all. The application looks hang-up
until TCP timeout happens on the client side, which may take too
long.
Therefore, the event MQTT_EVT_PINGRESP is added to inform the
application that the route between client and server is still valid.
Signed-off-by: PK Chan <pak.kee.chan@nordicsemi.no>
Add iterating over the static threads for k_thread_foreach and
k_thread_foreach_unlocked iterator functions
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use DT_INST_* instead of the hard-coded macro from the HAL,
as DT_INST_* are preferred.
Fixes#17775
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add the girq and girq-bit fields to the binding. This allows
encoding GIRQ related information inside device tree.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some commands need to be processed before a "\r\n" is available and
there might also be commands that have "\r\n" as data but doesn't mean
the end of the command.
To solve this a MODEM_CMD_DIRECT has been added. cmd_handler_process()
will look for matching direct commands before checking if a whole line
is available for matching the normal commands.
A direct command can return either -EAGAIN, meaning that more data is
needed or it will return the number of bytes to skip forward, ie the
length of the command that was handled.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
In most cases gpio_pin_configure()'s return value is checked in this
application; Coverity noted a case where it is not checked. Add a
check to make it happy.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit updates the the IPv4 ping command to handle the ENETUNREACH
error number returned by `net_icmpv4_send_echo_request` function when
IPv4 is unavailable.
The `net_icmpv4_send_echo_request` function previously returned EINVAL
when IPv4 is unavailable and this caused the shell command to report
"Invalid IP address" even when the provided IP address is correct; this
problem was corrected by returning ENETUNREACH instead of EINVAL in the
aforementioned function.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
net_icmpv4_send_echo_request currently returns EINVAL (invalid
argument) when IPv4 is unavailable.
Since the availability of IPv4 has nothing to do with the arguments
provided to this function and the meaning of EINVAL in this case is
ambiguous, return the ENETUNREACH (network is unreachable) error
number instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Introduces a new SDL mouse driver for the keyboard scan (kscan)
interface. Driver is implemented as SDL event filter
Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
Only basic support has been added as some drivers require some fixes.
I have successfully tested the following examples:
- samples/hello_world
- samples/basic/blinky
- samples/basic/button
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This change removes the hardcoded subsystem list in gen_kobject_list.py
favor of marking the relevant driver API structs with the _subsystem
sentinel.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
This change extends the parse_syscalls.py script to scan for a
__subsystem sentinal added to driver api declarations. It thens
generates a list that is passed into gen_kobject_list.py to extend
the subsystems list. This allows subsystems to be declared in the
code instead of a separate python list and provides a mechanism for
defining out-of-tree subsystems.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
The TCP connection might be concurrently modified from the
TR/TX threads, so add a mutex to protect from the concurrent
modification.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
