This commit updates the `xilinx_zynqmp` SoC initialisation code to use
the CMSIS-Core(R) features.
In addition, it also defines the Core IP revision value for the SoC as
specified in the Zynq UltraScale+ Device Technical Reference Manual.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
With new NXP HAL, MCUX CSI does not necesseraly start the
capture into the first submitted buffer. However the driver
expects that buffers will be captured in submitted order.
Fix that.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
k_mem_pool_malloc reserves some space for block descriptor at the start
of the data block, causing misalignement of returned video buffer.
In our context we want to return a video buffer with aligment matching
the video buffer poll alignment config. Fix that by using the simpler
k_mem_pool_alloc function.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Document how whitespace is used in Kconfig sources. This serves as an
authoritative reference in code review.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
A bug in the PKT_US resulted in wrong calculations for the 2M phy.
Fixes the bug, verified on EBQ.
Also adds some defines for improved readability.
Fixes#23482
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
After RX is disabled during receiving, some bytes are received to
internal fifo. To not interfere with further transactions fifo has to be
flushed.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Name all subsystem reference consistently with an '_api' postfix and
clean up naming and folder structure in some cases.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move the terminology section to its own page in preparation for
additional sections to be addded later.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add Virtual LAN support to stm32 Ethernet driver. Refactor the
eth_iface_init() and move device configuration settings to
eth_initialize() as the eth_iface_init() is called multiple
times (once / configured VLAN).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix LLL implementation handling preemption of currently
active radio event with densely scheduled events in the
pipeline.
Preempt timeout was stopped without consideration to there
being more queued events in the pipeline. Also, added
chaining of preemption timeouts one after the other expiry
so as to preempt currently active events by the densely
scheduled events in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in handling invalid packet sequence in the
first packet in a connection.
This relates to commit 62c1e1a52b ("Bluetooth: controller:
split: Fix assert on invalid packet sequence")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in handling tx pool corruption in relation to
commit 7a3e29af06 ("Bluetooth: controller: legacy: Fix Tx
pool corruption").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is like MACRO_MAP(), but it pastes the results together into a
single token. The result is kind of a fold of the ## operator.
I wasn't able to figure out a way to implement this using any of the
existing macros, so there's some more copy/pasting of handler macros
for different numbers of arguments.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Towards cleaning up (and hopefully removing dts_fixup.h in the near
future). We need to move the handling of different names for the irq
flag propety into the driver and out of dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Towards cleaning up (and hopefully removing dts_fixup.h in the near
future). We need to move the handling of different names for the irq
flag propety into the driver and out of dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The bootloader on mec15xxevb_assy6853 clears the memory on reboot,
which would fail the wdt_basic_api test. Instead of simply exclude
the platform, add a build only test for this board so the watchdog
is being built to avoid build breakage.
Fixes#20301
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
ieee802154_scan() checks if ctx->scan_ctx (scan) is NULL what implies
that this can be true, but de-reference this variable before this
check what may cause a problem.
Fixes#23299 [3]
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
ftpr assignment is being done before checking fb->fonts pointer.
Just changing assignment position.
Fixes 23299 [1]
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This patch is setting the pin to very high speed for all
the SPI2 clock outputs, for the stm32f7 soc series.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Minor header file doxygen fixes:
- Use /** @brief consistently
- Indent all comments to the same level
- Use @note instead of NOTE:
- Align @note text
- Align @return text
- Add /** to documentation comments
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Private type, internal to the kernel, not directly associated
with any k_object_* APIs. Is the return value of z_object_find().
Rename to struct z_object.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rather than stuffing various values in a uintptr_t based on
type using casts, use a union for this instead.
No functional difference, but the semantics of the data member
are now much clearer to the casual observer since it is now
formally defined by this union.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various kconfig symbols where defined specifically for board
nucleo_l432kc. Though, most are generic to the sample so should moved
directly to sample prj.conf
Some others parts of boards default configuration so could be removed
as well.
Last remove CONFIG_OPENOCD_SUPPORT as sample has no dependency with
this symbol.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert usb_stm32 driver to use of DT_INST macros.
Since driver is compatible with 3 different dt compatibles and
compatible string is included in DT_INST macros, I've kept the
DT_USB_ compatible agnostic macros based on DT_INST ones, which
allowed to remove fixup definitions.
Use of DT_USB symbols is now limited to usb_dc_stm32.
Additionally, compatible "st,stm32-otgfs" is removed from list
of compatibles for usbotg_hs ips.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert driver to use DT_INST_ defines.
In the process, we've removed all UART/USART/LPUART code in
device instanciation code which had no impact.
Since all uart/usart/lpuart nodes declare compatibility with
st,stm32uart, DT_INST_X_ST_STM32_UART_FOO could be used.
Removed DT_UART fixup macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
