Net-tools revision 4bff01084d225996e4aae84b98be5969e2f9f33d
is needed for running network sample test scripts.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Get latest EDTT version, which includes a fix for
LL/CON/MAS/BV-23-C regarding the feature set bitmask
check.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Update revision of the hal_nordic module, so that `uint32_t` arguments
are casted to `unsigned long` in nrfx log messages.
This is done to avoid warnings about providing an argument of type
`uint32_t` (which is `unsigned int`) where a `long unsigned int` one
is expected.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The Silicon Labs EFM32 Jade Gecko MCU includes:
* Cortex-M3 core at 40MHz
* up to 1024KB of flash and 256KB of RAM
* multiple low power peripherals
This is basically the same as the EFM32 Pearl Gecko, but with an ARM
Cortex-M3 core instead of a Cortex-M4F.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Update the hal_nordic module revision, to switch to nrfx 2.1.0.
Because the list of peripherals for nRF5340 has changed as follows:
- SPIM2 has been renamed to SPIM4
- SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added
a couple of related corrections needed to be applied in dts and Kconfig
files, plus the spi_nrfx_spim driver has been extended with the support
for SPIM4.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Adds this commit, needed to avoid a false positive warning when running
pylint on genrest.py:
The KconfigCheck test in check_compliance.py uses
scripts/kconfig/kconfiglib.py from Zephyr, and nothing else needs
Kconfiglib to be installed from PyPI either.
Installing the old 10.30.0 version of Kconfiglib makes pylint
generate a warning-turned-error for genrest.py, because it uses a
the suppress_traceback parameter to Kconfig.__init__(), which was
added later.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
So far, nRF 802.15.4 radio driver build was dependent on the 802.15.4
subsystem in Zephyr. While this was a reasonable approach for samples,
it prevented the radio driver from being built as a standalone entity,
which could be useful in some applications (e. g. running core nRF
802.15.4 radio driver tests with Zephyr).
Resolve this, by providing a separate set of Kconfigs for the radio
driver, therefore allowing to build it as a separate entity. The 802154
subsystem simply enables the radio driver module in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Zephyr-specific files in mcux break when the drivers subdirectory is
no longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Zephyr-specific files in mcuboot break when the drivers subdirectory
is no longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A Zephyr-specific file breaks when the drivers subdirectory is no
longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
ELM FatFS implementation supports LFN, enabled via ffconf.h
configuration file. Additionally, code page (character set),
max file name length, and memory mode (LFN working buffer location)
are configurable options closely related to LFN.
Without LFN filenames are restricted to 8.3 filename format.
Add kconfig options to expose following FatFS configurations:
enable LFN, specify max filename length, specify code page
(character set), specify LFN working buffer location.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
NFFS support repository reference was removed
as unneeded anymore by removal of NFFS support in the codebase.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Include the CANopenNode CANopen stack as a module in Zephyr.
CANopenNode is licensed under the Apache-2.0 license.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
OpenThread settings implementation built on top of Zepyhr settings
submodule.
With this solution, OpenThread settings are identified with keys of
the following format: `ot/id/instance`, where `id` is assigned by
OpenThread stack, and `instance` is a 32-bit random number, both in
hex. The implementation makes use of `settings_load_subtree_direct`
function to iterate over settings instances. This allows the
OpenThread settings layer to be a fully transparent shim layer between
OpenThread/Zephyr APIs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update hal_stm32 to new version including latest STM32Cube packages.
Includes the following:
- stm32cube: update stm32wb to version V1.3.0 (commit 374333f)
- stm32cube: update stm32g0 to version V1.3.0 (commit e209cea)
- stm32cube: update stm32f0 to version V1.11.0 (commit 08833e5)
- stm32cube: update stm32f3 to version V1.11.0 (commit 2a412a4)
- stm32cube: update stm32h7xx cube version to V1.5.0 (commit a08d1dc)
- stm32cube: update stm32f2xx cube version to V1.8.0 (commit b4226d5)
- stm32cube: update stm32f1xx cube version to V1.8.0 (commit a515c67)
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Gets these commits in:
check_compliance.py: Detect refs to undef. symbols in samples and
tests
Extend the check for references to undefined Kconfig symbols to also
detect undefined symbols in samples and tests.
Samples and tests were skipped due to using separate Kconfig trees,
which hid the symbols defined in them. Work around it by grepping
for Kconfig symbol definitions in them instead.
Keep properly parsing the main Kconfig tree, as it's needed to see
symbol names that are stitched together with the Kconfig
preprocessor.
------------------------------------------------------------------
check_compliance.py: Detect bad header comments and other nits
Add a generic kitchen-sink Nits test for various minor nits that
aren't already covered by tools like checkpatch.pl and pylint. So
far checks this:
- Header comments in Kconfig files
- Missing newlines at the end of various source files (probably a
bad editor setting)
- Leading/trailing blank lines in files
------------------------------------------------------------------
check_compliance.py: Kconfig: Flag redundant $ZEPHYR_BASE in
'source'
'source's like
source "$(ZEPHYR_BASE)/Kconfig.zephyr"
can be simplified to
source "Kconfig.zephyr"
since $srctree already points to the Zephyr root.
Flag it in the Nits test.
This also avoids absolute paths showing up in some places.
------------------------------------------------------------------
check_compliance.py: Improve error reporting for Git commands
Similar improvements to
https://github.com/zephyrproject-rtos/zephyr/pull/21577. No custom
potentially-missing working directory is used here, but always
including the exception message still feels more robust.
Use err() instead of sys.exit() in git(), and have it include the
command name, which is helpful in logs.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
hal_nordic required update in ieee802154 radio driver which
is controlling the clock.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Get this commit in, needed to pass CI with the doc changes in this PR:
check_compliance.py: Add STACK_SIZE to Kconfig symbol whitelist
Needed for https://github.com/zephyrproject-rtos/zephyr/pull/20722.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit removes the hard coded mbed TLS library name
`lib..__modules__crypto__mbedtls.a` in top-level CMakeLists.txt file
and instead uses zephyr_library_app_memory function.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follwing the convention in Zephyr, all CMake configuration related to
a module, should be placed within the module repostiory.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
MCUBoot is the bootloader on which zephyr DFU solutions
base. It is worth to reference certain compatible version
of this external project. So fare it was expected that
mcuboot works with zephyr in master to master relation. This patch
starts to give the user real information about compatible version.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
OpenThread recently introduced CMake build system into its repostiory
so we no longer need autotools to build OpenThread libraries and can
integrate them natively.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Renames the lpc usart shim driver to more accurately reflect the
flexcomm hardware IP and to prepare for instantiating it on an SoC
outside the LPC family.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fetch HW models from a new west module.
And, remove all pre-west glue which was used to:
* Fetch them in CI
* Validate their vesion
* Modify the include path and link to them
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Update west.yml to point to newer versions of fatfs, nffs, and mcumgr
to pull in fixes for using proper include files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Get this commit in:
check_compliance.py: Run the dtlib/edtlib test suites on Python 3.5
Will work once
https://github.com/zephyrproject-rtos/zephyr/pull/20597 is in. CI
uses Python 3.5, so they have been skipped until now.
That PR is in now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update Zephyr manifest so it picks the tip of hal_nordic.
Signed-off-by: Bartosz Sokolski <bartosz.sokolski@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
There are a couple of commits that are needed for
the BLE SW LL to function properly on the VEGABoard:
- TRNG entropy driver
- GenFSK radio enablement + configuration
As such, make sure that the commit in the manifest
points to the appropriate SHA in the hal/openisa
repo.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Update the hal_nordic module revision to switch to nrfx 2.0.0.
Add Kconfig options that enable to use the newly introduced nrfx
drivers in Zephyr.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There is no imx ccm shim driver in drivers/clock_control. This config
was only used to conditionally compile nxp hal drivers, even though the
imx6/7 soc init always needs them.
Updates the nxp hal to unconditionally compile the ccm drivers and
removes the unnecessary config symbol.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove unnecessary inclusion of offsets_short.h in the LPC54114
start-up code.
See zephyrproject-rtos/hal_nxp#17.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Get this commit in:
check_compliance.py: Run pylint on scripts/sanitycheck
https://github.com/zephyrproject-rtos/zephyr/pull/20212 fixes the
last pylint warnings in the script. Once that one is in, this can be
merged.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add SPI driver and bindings for LPSPI peripheral for the RV32M1 SOC.
Based heavily on the existing mcux LPSPI driver.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Use the newest version of the OpenThread project, as updated in
https://github.com/zephyrproject-rtos/openthread/pull/2.
Introduce the following fixes along with the update (they're squashed to
retain bisectability of OT samples):
* Update configs and flags used
Some OT configs were renamed, some new were introduced that Zephyr port
needs to set.
* Add entropy platform driver
OpenThreads `random` platform subsystem was replaced with `entropy`
subsystem which is supposed to serve as an entropy source for the
generic OpenThread's random generator.
* Halt OT thread when OT command is processed
OpenThread can currently be processed from two threads - a
genuine OpenThread thread and shell thread, which processes CLI
commands. This could cause trouble, when context was switched
during OT command processing (i.e. switched to process an incomming OT
message, while still in unfinished command handler).
In result, it was not possible to turn the commissioner role on via
CLI, as the commissioner petition response was handled before the
Commissioner::Start function finished its execution (if the
petitioner is also the network leader, all messages are passed
internally within the stack).
Fix this by suspending the OT thread for the time of an OT command
processing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Updated mbedtls reference to take in:
native: debug: Set speed optimization if ASAN is used
(zephyrproject-rtos/mbedtls#4)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v1.02.
Requires https://github.com/zephyrproject-rtos/hal_st/pull/3
Signed-off-by: Armando Visconti <armando.visconti@st.com>
These features are available only for SPIM3 and when they are enabled
but this instance is not, the compilation fails. So they cannot be
enabled by default (as currently), but only when it is actually needed
(and possible).
Update the module revision to fix the issue in nrfx_config_nrf52840.h.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds support for Kinestis K22
Co-authored-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Co-authored-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Co-authored-by: Tom Burdick <thomas.burdick@gmail.com>
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
This change is done so that there is no need to additionaly include
<nrfx.h> before <soc/nrfx_coredep.h> (what might be a bit surprising)
and so that <nrfx_config.h> doesn't need to be include separately for
nRF SoCs requiring a special mapping of peripheral accessing symbols.
This commit removes also no longer needed inclusions and updates
the hal_nordic module with required minor correction of nrfx_glue.h.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Get these commits in, which together make it so that warnings from
checkpatch.pl are always shown, even when the check succeeds.
- Commit 72f74d7 ("check_compliance.py: Add support for informational
messages")
- Commit 9d46f5b ("check_compliance.py: Always show warnings from
checkpatch.pl")
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update the module revision so that the following commit becomes
effective:
* nrfx_config_nrf9160: Remove dependency on DT from NRF_* mappings
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Get commit 343b5c7 ("check_compliance.py: Treat all .py files as Python
in pylint check") in.
libmagic doesn't consider the filename, and mis-detects kconfiglib.py as
HTML for example. Treat all files ending in .py as Python, and only use
libmagic for other files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
So far OpenThread compiled it's own, internal copy of mbedTLS library.
This commit changes this behavior by using Zephyr's mbedTLS instance
appropriately configured for OpenThread needs.
Generic mbedTLS config file was used in this case, so that application
can still configure remaining parts of mbedTLS for it's own needs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Get these ci-tools commits into CI runs:
- Commit 3a08069 ("check_compliance.py: pylint: Detect Python files not
ending in .py")
- Commit 2184bb4 ("check_compliance.py: Fix formatting mess-up for
error messages")
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The latest ci-tools reports the shippable job number in the status
check. This is useful if we have an error or something to be able
to find the logs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update to CI image 0.9.1 to have pylint installed. Bump ci-tools sha
that re-enables running the pylint test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This extra step is needed after updating the ci-tools repo now, or the
latest tests won't run.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We don't want to point anything outside of the Zephyr GitHub
organization. Let's point at the recently created zephyr fork instead.
Details on how this will be managed going forward, according to
standard project policy:
https://docs.zephyrproject.org/latest/guides/modules.html
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Update the module revision so that the following commits become
effective:
* nrfx_config: Use common mappings of Kconfig options to nrfx macros
* nrfx_config: Unify the way of enabling instances in nrfx drivers
* nrfx_config: Add missing mappings of Kconfig option symbols
* CMakeLists: Add missing inclusions of driver implementation files
The above changes require a minor correction in the nrf91/soc.h file,
so it is also modified in this commit.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Commit 5852d8f from https://github.com/zephyrproject-rtos/hal_nxp
fixed the import script, but there's no corresponding update for the
west.yml configuration file. As such, if one attempts to add support
for new drivers, they'll be copied in the wrong places
(under $ZEPHYR_BASE). As such, modify the west.yml file to point to
the HEAD of the master branch of the hal_nxp repo.
Fixes: 5852d8f mcux: adjust paths in import script after moving
HAL to module
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Maintain this HAL in its own repo:
git@github.com:zephyrproject-rtos/hal_openisa.git
and manage using west.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is possible that cmake in civetweb influenced the rest of the build
process, as described in #17996.
Right now only cmake version amd "project" directive is executed when
building from Zephyr but not requesting CONFIG_CIVETWEB.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
littlefs is a fail-safe filesystem from ARM Mbed that has wear-leveling
capabilities.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Jim Paris <jim@bolt.io>
The main change is the elimination of the bootstrapper, a design flaw
/ misfeature.
Update the documentation to be compatible with the 0.6.x releases as
well. This has to be done atomically, as there were incompatible
changes. Make use of the versionchanged and versionadded directives
to begin keeping track of how these APIs are evolving.
(Note that west 0.6.0 will remain compatible with the extension
commands in Zephyr v1.14 LTS as long as that is still alive. This
change is targeted towards Zephyr 2.0 users.)
This requires a bump in the shippable container and allows us to
simplify the west_commands test procedure.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This commit adds civetweb as a west module and a sample that uses it.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Removed lvgl sources from CMakefile.txt and only keep zephyr glue
logic.
Further added lvgl module to west.yml.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
On some STM32 series, I2C HAL defines I2C_SPEED_STANDARD and
I2C_SPEED_FAST. These definitions conflict with Zephyr I2C API.
Since Zephyr I2C STM32 driver uses LL API, we can disable I2C HAL.
Disable I2C HAL for L1 and F2 series. Deactivation is already done
2 other impacted series F1 and F4.
Additionally, on F1 series, add the commented definition line to
make the change more visible.
Requires https://github.com/zephyrproject-rtos/hal_stm32/pull/16
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This update contains the following changes
* Introduce STM32G0 Cube V1.2.0
* Update API for STM32MP1 IPCC
* Update Cube version for following series:
STM32F0XX: from version: V1.9.0 to version: V1.10.1
STM32F1XX: from version: V1.6.1 to version: V1.7.0
STM32F4XX: from version: V1.21.0 to version: V1.24.1
STM32F7XX: from version: V1.12.0 to version: V1.15.1
STM32L0XX: from version: V1.10.0 to version: V1.11.2
STM32L1XX: from version: V1.8.0 to version: V1.9.0
STM32L4XX: from version: V1.13.0 to version: V1.14.0
STM32WBXX: from version: V1.0.0 to version: V1.1.1
* Includes a fix for L4 following package update
* Includes a fix for G0 following package introduction
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
split ext/hal/st into two modules:
- hal_stm32: For the code meant to run on STM32
- hal_st: For the code meant to drive ST components
Fixes#16316
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We need to be able to force certain versions based on the branch and
code base being used. For example for 1.14 we will need to apply some
fixes or revert some commits that may only apply to master.
Next step is also adding this to 1.14 branch and use a working commit.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To avoid and minimize conflicts when items are always added to the
bottom of the list, order things alphabetically.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This fixes some high priority issues, including syntax errors in
docstrings which prevent us from including API docs in our Sphinx
tree.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Set the revision to the v0.5.6 tag in west.yml and update the minimum
version. Barring any (more) major undiscovered issues, this will be the
version used with Zephyr v1.14.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Use tinycbor from the tinycbor repo directly and drop the library from
ext/.
Add entry to west.yml and update SHA.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is the west manifest file for mainline zephyr.
For a burn-in period, we are going to keep west pointing at master to
avoid deps rolls as we iron out any kinks. We can then set its
revision to a SHA after things settle down.
The projects key is mandatory (if there's only one repository, there
wouldn't be much need for west!) so we'll start things off with the
net-tools repository at its current master SHA.
Signed-off-by: Marti Bolivar <marti@foundries.io>
