Added an entry in drivers/Kconfig for audio
Added an entry in drivers/audio/Kconfig for audio codec
Added an Kconfig file in drivers/audio/ for TLV320DAC
Enabled audio coded in Intel S1000 CRB defconfig
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Updated the implementation of PHY update procedure to not
assert when peer master violates the Bluetooth Specification
v5.0 Vol.6 Part B Section 5.3 Procedure Collisions. Instead
disconnect the link with reason Different Transaction
Collision (0x2A).
Certain phones in the market perform Connection Update
Procedure and do not correctly handle remote initiated
colliding PHY update procedures. They try to perform both
the transactions involving an instant simultaneously
violating the Bluetooth Specifications.
Implementation in Zephyr is updated to gracefully handle
the violating remote master device, and not fatally assert
in the local device.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add ifdefs to the SiFive GPIO driver IRQ bindings to allow fewer than
32 pins to be configured based on the DTS configuration
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
The choice that contains FP_HARDAPI and FP_SOFTAPI already depends on
FLOAT, so the choice symbols don't have to.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Threw an exception about Kconfig files not being found. They need to be
looked up relative to ZEPHYR_BASE.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Due a design goof, the top-level Kconfig file passed to
Kconfig.__init__() wasn't looked up relative to $srctree. This broke a
planned fix for an issue with the CI check for references to undefined
Kconfig files in external projects.
Update Kconfiglib to upstream revision 953cc12464 to fix it.
Also update doc/CMakeLists.txt to pass 'Kconfig' instead of '../Kconfig'
to genrest.py. $srctree is already set to $ZEPHYR_BASE.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
PR #8729 removed the old GPIO_NRF5 driver in favor of an
nrfx-based one. The reel_board still references the old one,
causing CI failures.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As reported in issue #9494, BT samples are using the off-chip
UART-based BT controller on 52810. But the on-chip BT controller is
supported on 52810, so this is the reasonable default when BT is
enabled.
This patch enables BT_CTLR by default when BT is enabled.
This resolves#9494.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This enables reserving little space on the top of stack to store
data local to thread when CONFIG_USERSPACE. The first customer
of this is errno.
Note that ARC, due to how it lays out the user stack and
privilege stack, sets the pointer itself rather than
relying on the common way.
Fixes: #9067
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The code was not working properly if there was multiple timers
that were triggered in different times.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After GPIO shim using NRFX has been implemented, old gpio_nrf5
shim is no longer needed.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
I removed GPIO configuration from board files and enabled them
as default in driver Kconfig file. All boards had GPIO ports
enabled that is why I decided to enable it by default.
Power management example was changed to use new driver.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
The autoconfigured IPv6 addresses that are related to removed
prefix, need also removed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the IPv6 address expires, then it is marked as deprecated.
If a renewal is received in router advertisement, then the address
can be re-used again and is marked as preferred.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No functionality changes. Just moved IPv6 fragment and related functions
to ipv6_fragment.c for better readability
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No functionality changes. Just moved IPv6 MLD and related functions
to ipv6_mld.c for better readability.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No functionality changes. Just moved IPv6 neighbor and related functions
to ipv6_nbr.c for better readability.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Each IPv6 neighbor entry had a k_delayed_work to be used as a timer to
send ND reachable message and waiting for the reply in order to get to
the neighbor details.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
IPv6 ND reachable request timer by having one central k_delayed_work
and a timestamp in every IPv6 neighbor data entry properly handled at
every timeout.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Each IPv6 neighbor entry had a k_delayed_work to be used as a timer to
send NS message and waiting for the NS reply in order to get to the
neighbor details.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
IPv6 send NS request timer by having one central k_delayed_work and
a timestamp in every IPv6 neighbor data entry properly handled at every
timeout.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit contains several fixes for DTLS implementation, proposed in
a post-merge review of #9338.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add checks so that we do not overflow the network interface
array. Similar issues was fixed in commit b4dae00741 for
TX timestamp tests.
Fixes#9465
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of having one delayed_work struct / IP address, use
only one delayed_work struct for lifetime timer. This saves
over 20 bytes / allocated address struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor usage of net_sprint_ip*() where multiple
invocations are needed per single log call.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The intention is to clean up the usage of net_sprint_ipv*_addr()
functions where 2 or 3 invocations are needed.
Thus, the default number of buffers is 3.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Fixes#9462
Coverity ID: 187670
Attempts to recalculate deltaBandwidth with no link lead to division by
zero.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This rewrites the implementation of the APP_INPUT_SECTION and
KERNEL_INPUT_SECTION macros such that an unbounded amount of
kernelspace libraries can be used.
This resolves#7703
The new implementation has a caveat/limitation; the linker script
developer must invoke APP_INPUT_SECTION before KERNEL_INPUT_SECTION.
All in-tree linker scripts happened to already be doing this so no
in-tree porting was necessary.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Minor refactoring and commenting of the _SECTION infrastructure in
preparation for future improvements.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Several code guidelines recommend using uppercase L instead of letter
l (ell) because it can easily be confused with the digit 1 (one).
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
memcpy always return a pointer to dest, it can be ignored. Just making
it explicitly so compilers will never raise warnings/errors to this.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
__ASSERT macro will either exit the program (POSIX port) or infint
loop. In both cases printk's return is not necessary.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
queue_insert will always return 0 when no memory is allocated, just
explicitly marking that we are ignoring return value in these cases.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Bitwise operators should be used only with unsigned integer operands
because the result os bitwise operations on signed integers are
implementation-defined.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
