We now have functions for handling all the details of copying
data to/from user mode, including C strings and copying data
into resource pool allocations.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Uses fixup infrastructure to safely abort if we get an MPU
fault when examining a string passed in from user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Uses fixup infrastructure to safely abort if we get a page
fault while measuring a string passed in from user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Defines some common macros and data structures for declaring
text section ranges with fixup handler addresses if an
exception occurs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ports_enable array holds port clock information.
It is populated for all SoCs, but ports availability depends on
SoCs. The way it is defined today, location of the port in the
array depends on previous ports definition in SoC CMSIS files.
Though, port index is always the same irrespective of previous
ports availability in the SoC.
This will result in incoherency between port index and clock
information.
Fix this by setting a bogus value if port is not defined.
Return an error if bogus value is read.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Only basic features supported initially but more could be added from:
https://www.nxp.com/docs/en/data-sheet/MMA8451Q.pdffixes#9006
A sample app will be provided in a separate PR.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
Adding IPv4 autoconf sample application that can be used to
test IPv4 autoconf functionality.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It shouldn't be necessary to disable the mpu for this test. Enable
CONFIG_MPU_ALLOW_FLASH_WRITE=y instead.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The flash API requires write protection to be disabled before erasing
the flash. It appears that the nordic platforms for which this test was
originally implemented do not enforce the requirement to disable write
protection. The mcux flash driver, however, does enforce the
requirement, so fix the test to make it work on kinetis platforms.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Warnings generated during symbol evaluation were accidentally ignored,
due to checking for warnings before writing .config and autoconf.h
(which indirectly evaluates all symbols).
Move the warning checking code to after writing the configuration to
catch such warnings. kconfig.py still gets rerun if any
warnings-turned-errors show up.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Whoever added Zephyr's prefer-later-defaults Kconfig patch originally
didn't do the same for 'range's. Earlier ranges are still preferred.
Swap the ranges on BT_RFCOMM_L2CAP_MTU to give the intended behavior.
Fixes the following warning for tests/bluetooth/shell/prj_br.conf:
warning: default value 200 on BT_RFCOMM_L2CAP_MTU (defined at
subsys/bluetooth/host/Kconfig:508) clamped to 264 due to being outside
the active range ([264, 32767])
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Essentially all products that support pairing or Mesh need to be able
to support ECC. This is particularly important for traditional
peripheral/central use cases where legacy pairing is considered
insecure. With split builds we don't know if the controller supports
ECC HCI commands or not, however with a combined build we know that
the current controller lacks any special ECC support, so enable
TINYCRYPT_ECC by default for such a configuration.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This app will not fit in the 96b_nitrogen board with ECC enabled.
"real-ld: region `SRAM' overflowed by 68 bytes". Disable the feature
explicitly since a subsequent patch will auto-enable it for all
combined Bluetooth Host-Controller builds.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
OpenThread L2 could've called multicast address registration multiple
times for specific address, which resulted in having multiple entries
containing the same multicast IPv6 address in Zephyr.
Checking if address was already registered prevents that.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Thread registers multiple unicast and multicast adresses by default. As
they are exchanged with Zephyr interface, we need enough buffers to
store them all.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit makes the driver enable HW Qav support for all available
priority queues.
Note that the hardware doesn't support setting the deltaBandwidth
parameter directly, but it is possible to do this by calculating it
from the negotiated link speed.
The default settings are set according to 802.1Qav 34.3.1, that says:
The recommended default value of deltaBandwidth(N) for the highest
numbered traffic class supported is 75%, and for any lower
numbered traffic classes, the recommended default value is 0%.
The default/recommended values can be changed using the ethernet
management API (set_config) - which this commit also adds.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Handle getting the number of priority queues. The total number of queues
for this driver is configured in kconfig so it is as simple as returning
a defined value in this case.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Follow the packet sending error code in the driver. If packet
cannot be sent, then return <0 to the caller and do not free
the packet. In practice this is not happening here but follow
this general rule anyway.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For each driver/model with command line options.
Move its code for the board file into the driver/model file.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Allow command line arguments to be registered dynamically
instead of being statically defined.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Some drivers or tests need to execute some code before Zephyr is
booted, dynamically register command line arguments, etc.
For this purpose, we generalize the NATIVE_EXIT_TASK to also
provide hooks to run a function at a given point during the startup
of native_posix.
Also, test/boards/native_posix/exit_tasks is generalized to cover
this new functionality.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This brings in content from commits in the upstream West
repository. Since both the version here and upstream have diverged,
this synchronizes them again.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Test to verify k_thread_user_mode_enter() when usermode is
not enabled or supported by architecture. The thread which calls
k_thread_user_mode_enter() with CONFIG_USERSPACE disabled or
architecture doesn't support usermode, should be marked
as usermode and if it is essential, then it has to be cleared.
This is added to improve code coverage.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The .eh_frame symbol was causing __data_rom_start to contain the wrong
offset into the ROM, resulting in corrupt data copied into RAM by
_data_copy(). Fix by placing the .eh_frame in the .text section as is
done in include/arch/x86/linker.ld
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
No need to keep technologies in main L2 directory so for consistency
create a directory for each of them and place each L2 component to
relevant L2 directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some Ethernet devices can filter out incoming packets through a list of
valid MAC addresses, so let's add a way to expose this capability, using
it through the ethernet device API.
Fixes#7596
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The SMP_FLAG_ENC_PENDING flag indicates that we've generated an STK
and are waiting for encryption to happen. In case the remote enables
encryption prematurely we should not try to encrypt with whatever is
stored in smp->tk, rather reject the pairing attempt.
Fixes#3222
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The recently added pairing_complete & pairing_failed callbacks
were missing a NULL-check for bt_auth, since it is possible that
there's no authentication callback structure registered at all.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When building the real mode, the linker definition has to place
the real mode entry code at the start of flash area.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The board config has been verified to boot with serial console
on the Atom version of the UP Squared board. So the references
to Pentium/Celeron can be removed. Moreover, add some notes on
BIOS settings, as it may change the MMIO addresses for various
IP blocks.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds PCI related configuration for UARTs and I2C controllers
to the Apollo Lake SoC configuration to support PCI devices.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add the necessary bits to enable the I2C controllers on
the UP Squared board. Only the ones exposed through the HAT
connector(s) are enabled by default.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Disable CONFIG_I2C and CONFIG_SPI for minimum footprint test,
since we are doing "minimum" footprint.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary driver structs to support a total of 8
I2C controllers. This also allows each I2C controller to have
its own PCI vendor/device IDs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
