Parameter 'names' is provided as argument of several property
extract functions. Thought it is actually used only once.
Remove when not needed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch changes the behavior of the sensor. The sensor
will remain in sleep mode after initialization and will only
run the measurements once when sample_fetch is called.
This optimizes the power consumption of the sensor as it
stays in sleep mode most of the time.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Refactor and reorganize ALS and proximity setup functions.
Cleanup and reorder register, fix register fields.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
To improve the code coverage on native posix, adding CONFIG_SCHED_MULTIQ
for scheduler api tests.
Extracting a separate prj_native_posix.conf file for the scheduler test,
which validates the "multi queue" scheduler on native posix.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Use a lower slot duration than the used erase slot duration
to speed up the interval of write operations when in sync
with active Bluetooth connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This allows to provide public address for controller without using
VS HCI command from host. Useful for controller only builds or
combined builds that are not using VS HCI commands.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Commit introduces support for ARM TrustZone CryptoCell 310
for Nordic Semiconductor nRF SoCs in device tree.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
This change aims at fixing 'unit_address_vs_reg' warning in
STM32 based boards.
This warning pops up when a node name is made up with an address
(node_name@xx) but does not contain a reg property.
This case was encountered for button nodes for instance,
where a reg property has no meaning.
Fix this by changing node_name@xx to node_name_xx which removes the
guilty '@XX' syntax but preserves node_name uniqueness.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add harness console and include regex for output
pattern matching to determine correctness of
sample execution.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The header should check if the macro _MPU_PRESENT is defined
and create it only if not defined.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The total number of loops being executed were taking far too long
to finish executing the test case. This was causing the timer handler
to execute in the middle of the test case. Thereby causing a test case
failure.
Now the number of loops have been reduced and this will make sure the
test case completes.
This change has no effect on the time being calculated by the
benchmark.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The test case was supposed to access the privileged stack area
but instead it was accessing the stack guard region.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch updates the alignment for the memory domain partitions.
Also update the stack size for qemu_cortex_m3.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch will enable the MPU in MPS2_AN385 soc.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The code assumes that when the systick counter hits zero,
the timer interrupt will be taken before the loop can
read the LOAD/VAL registers, but this is not architecturally
guaranteed, and so the code can see a post-reload SysTick->VAL
and a pre-reload clock_accumulated_count, which causes it to
return an incorrectly small cycle count. By adding a ISB we
overcome this issue.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Added required files/support for the MPU in MPS2-AN358 (Cortex-M3).
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The lsm6dsl sensor driver incorrectly conditioned the interrupt pin
Kconfigs upon !HAS_DTS_SPI_PINS, when it should actually be
!HAS_DTS_GPIO_DEVICE.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds many missing sensor drivers and rebalances the testcases to
instantiate similar numbers of sensor drivers. Splits the sensor trigger
testcase into two due to having too many thread objects.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes casting warnings in multiple sensor drivers when creating their
own thread. These warnings were found when updating the build_all tests
to include missing sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The bmm150 sensor driver was missed in the conversion from kbuild to
cmake. This problem was found when updating the build_all tests to
include missing sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes a compiler format warning in the bmi160 sensor driver. This
warning was found when updating the build_all tests to include missing
sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes unused variable warnings for the adxl362 and lis2dh sensor
drivers. These warnings were found when updating the build_all tests to
include missing sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Due to the new changes for the subsys/app_memory we need to
have the script for smem run before any elf is created.
This is needed because the compiled code will have references to
certain linker variables that will be created by
gen_app_partitions.py.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The size calculation for power of 2 MPUs were incorrect.
The calculation was not taking into account the amount of padding
the linker does when doing the required alignment. Hence the size
being calculated was completely incorrect.
With this patch the code now is optimized and the size of
partitions is now provided by the linker.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Add support for adding and selecting pluggable PM policies
which can be enabled based on the application needs.
Also added a dummy policy for demonstration purpose which
simply loops over the supported PM states.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add Kconfig options for Low Power and Deep Sleep States which
need to be selected by the SoC's based on it's supported
Low Power States.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Enable UART 16550 driver for Nios-II QEMU platform.
Note: This PR is tested with patched version Qemu 3.0.0 which
adds support for altera_10m50_zephyr machine type.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This commit removes all MPU-related (ARM_CORE_MPU and NXP_MPU)
options exept ARM_MPU, which becomes master switch controlling
MPU support on ARM.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit introduces CPU_HAS_ARM_MPU and CPU_HAS_NXP_MPU options,
which indicate which flavour of MPU is supported by given SoC family.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The HAS_SYSMPU option is just selecting NXP_MPU option,
which could be also controlled through menuconfig.
This commit removes the HAS_SYSMPU option and replaces
its usage by NXP_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The ARM_MPU_IMX_RT option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_IMX_RT option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The ARM_MPU_NRF52X option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_NRF52X option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The ARM_MPU_ENABLE option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_ENABLE option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The STM32_ARM_MPU_ENABLE option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the STM32_ARM_MPU_ENABLE option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
If user enables VLAN support, then the sample application will
create two extra VLAN network interfaces for testing purposes.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
