Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a leftover license header from when we used a third party
driver that had since been replaced.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
write_buf and flash_content should be defined as global inside
main. Otherwise Python treats them as local variables and ends
up throwing an error because it thinks they are being used
without being defined.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
If a test tries to create a user thread, and the platform
suppors user mode, and CONFIG_TEST_USERSPACE has not been
enabled, fail an assertion.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For mysterious reasons this test fails cmake if
CONFIG_TEST_USERSPACE=n.
Enable it for now, bug tracked in #15232
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need all the socket APIs to work from user mode.
tests/net/socket/misc now runs in userspace.
Fixes: #15227
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test is designed to run in user mode, but was disabled
for some reason.
Re-enable, and add mps2_an385 to the whitelist as this is
the QEMU target that emulates an MPU.
Fixes: #15228
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix build error when executing sanitycheck on stm32 devices.
Command to execute tests:
sanitycheck --device-testing --device-serial /dev/ttyACM0 -p <board>
-t usb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
More buffers are need to build for sam_e70_xplained board
to work out of the box. Added board specific conf file.
Fixes#15096
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The results were incorrect because the timer was firing the
interrupts before the measurement was made.
Fixes: GH-14556
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the release notes page to include the 1.14 release notes
(currently a draft in progress), and update the main index page to
clarify how to get to documentation for other Zephyr versions.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The fix done in #14938 introduced a later assert when raising an HCI
event for the procedure that was terminated during the procedure
collision handling. This assert happens because the unknown rsp
has information that is needed when raising the event.
Solve this by copying the scratch packet into the node buffer so that
we keep the data.
Fixes#15183
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improvement in test case name is needed to make it easier
to navigate from test case name to the actual test
folder.
This is useful as some tools that consume tests directory
will only output test case name without directory names
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
Patch 8af3df3519 changed logic and did not take into account 2 extra
bytes.
...
Precise data bus error
BFAR Address: 0x766e4900
***** Hardware exception *****
Current thread ID = 0x200004e8
Faulting instruction address = 0xddf4
Fatal fault in thread 0x200004e8! Aborting.
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This test was having trouble earlier (at least with some toolchains),
but whatever was causing that seems to have been fixed. The only
remaining issue is that neither the IPM console code nor the test are
SMP-safe. There's a bug (#14639) tracking the need to get these
working, but for now the straightforward workaround is just to disable
SMP.
And even long term, IPM is an oddball interprocessor communication
mechanism designed for asymmetric multiprocessing devices like Quark
SE and doesn't seem like an obvious fit for a SMP machine.
Fixes#12478
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch adds information about the security vulnerabilities being
fixed in the 1.14 release.
Add a intro statement that these issues were addressed,
and include x86 vulnerabilities addressed in this release.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
We renamed _sys_trace_thread_switched_in to
z_sys_trace_thread_switched_in, however we already had a function
named z_sys_trace_thread_switched_in. So rename z_sys_trace... to
z__sys_trace...
Fixes: #15184
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a missing reference to how west is used to set ZEPHYR_MODULES in
without-west.rst, augmenting the application development guide a bit
to include this in the list of important variables, cleaning that up a
bit while we are here and adding some more west details.
Add a big fat warning in the getting started guide that using Zephyr
without west is not for the faint of heart.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
for SDK 0.10.0, it consumes more stack size when coverage enabled
on qemu_x86 and mps2_an385 platform, adjust stack size for most of
the test cases, otherwise there will be stack overflow.
Fixes: #14500.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
on platform nrf52810_pca10040, the remaining sram space is not enough
to build test cases kernel.sched.preempt and kernel.poll, temporary
exclude nrf52810_pca10040 on that two cases, will open them when issue
is fixed.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
PR #14776 / commit 915a353255 changed function
zephyr_library_compile_options() to use MD5 instead of RANDOM for build
reproduction reasons. As later predicted by Sebastian Bøe in the PR
(thx), the names generated for these pseudo-libraries won't be unique
anymore if the exact same flag gets added more than once.
To reproduce the issue, simply add the following two lines in some
CMakeLists.txt file like samples/hello_world/CMakeLists.txt:
zephyr_library_compile_options("-Dfubar=barfu")
zephyr_library_compile_options("-Dfubar=barfu")
cmake will then fail like this:
CMake Error at zephyr/cmake/extensions.cmake:403 (add_library):
add_library cannot create target
"options_interface_lib_e689fdb7eb15d801c2f95dd61301fc5e" because
another target with the same name already exists. The existing
target is an interface library created in source directory
"zephyr/samples/hello_world". See documentation for
policy CMP0002 for more details.
Call Stack (most recent call first):
CMakeLists.txt:9 (zephyr_library_compile_options)
As requested by Sebastian, silently discard duplicate options just like
CMake does.
Fixes#15093
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The current idea is that we document zsock_* prefixed symbols, refer
to Open Group POSIX website
(http://pubs.opengroup.org/onlinepubs/9699919799/) for normative
descriptions, and explicitly mention bare POSIX name of a function
too (so e.g. users could find it via search).
Fixes: #13397
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
For some reason we dropped the simulation keyword and this platform is
not running any tests, we are just building the tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in arch/ subdirectory. The Python
script gen_priv_stacks.py was updated to follow the 'z_' prefix
naming.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The stack information stored in the thread->stack_info
fields need to represent the actual writable area for
its associated thread. Perform various tests to ensure
that the various reported and specified values are in
agreement.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unlike the others, this macro was not taking into
account minimum MPU region sizes by filtering through
STACK_SIZE_ALIGN().
Fixes: #15130
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Similar issue to what was fixed earlier in the MPUv3
code. start + size should be <= r_addr_end. Fixes
a problem where the last byte of an MPU region is
incorrectly reported as out-of-bounds.
Fixes: #15131
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Permission management no longer necessary, the former
parameter for the mutex is now simply ignored.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various globals for the test cases have been moved to
the ztest memory domain data section via ZTEST_DMEM tags
so that user mode can access them.
Some anonymous arrays whose address was being placed in
the msg_subackX structs have been split out so they
are in ztest memory domain.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
