As discussed in the TSC meeting of 2019/03/27:
To ensure that we do not forget to remove an API 2 releases later
and to provide a bit better visibility about when the removal
is planned, require that a GH issue be created, and that this
issue be added to the roadmap for the apropriate release.
As a free bonus:
Removed a redundant line in the list and added one missing article.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Kconfig.modules used to be an empty file when no modules. PR #14667 /
commit bd7569f272 "cmake: Extracted Zephyr module processing into
python script" unintentionally changed that to no Kconfig.modules file
at all when no west and no modules. kconfig.py doesn't like that and
crashes. Restore the empty file.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
On Clear Linux, the CFLAGS is set and defines a number of aggressive
checks and optimizations. This causes a build failure when generating a
GRUB2 boot loader image using the 'build_grub.sh' script.
Unsetting it within the script allows it to proceed and successfully
build a functional GRUB2 boot loader image to be used with Zephyr.
Fixes: #14289
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
When generating the Kconfig reference documentation, enable the warnings
for undefined Kconfig options in order to make sure all references are
met.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to parse all the Kconfig files that make up the whole Kconfig
tree we need to process the modules, since this can optionally provide
Kconfig files. In order to do so, include the modules CMake file so that
they are listed and a Kconfig.modules is generated.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fixes: #14513
This commit move the functionality of extracting zephyr modules into
generated CMake and Kconfig include files from CMake into python.
This allows other tools, especially CI to re-use the zephyr module
functionality.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
This page has been replaced by doc/guides/debugging/probes.rst and
doc/guides/debugging/host-tools.rst
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Updates the 96b_nitrogen board document to link to the new debugging
guide instead of the opensda page.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Reworks the programming and debugging section in the usb_kw24d512 board
document to leverage the new debugging guide covering debug probes and
host tools.
This board does not have an OpenSDA microcontroller, therefore the only
debug probe currently supported is the external J-Link.
Updates the flashing section to reflect that the ``flash`` build system
target is now supported.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Reworks the programming and debugging section in the lpcxpresso54114
board document to leverage the new debugging guide covering debug probes
and host tools.
This board supports the LPC-Link2 J-Link onboard debug probe.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Reworks the programming and debugging section in the hexiwear board
documents to leverage the new debugging guide covering debug probes and
host tools.
Recommends the OpenSDA J-Link debug probe because the k64 and kw40z
share the same OpenSDA microcontroller, and the kw40z requires Segger
RTT for a console. It is possible to use daplink firmware for the k64,
however it is not recommended because it requires switching the firmware
back to jlink to access the kw40z.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The hexiwear_k64f and hexiwear_kw40z share the same OpenSDA
microcontroller on the hexiwear docking station, so make the jlink the
default firmware on both for consistency. We use jlink instead of
daplink by default because hexiwear_kw40z can only use Segger RTT for
the console (there is no UART available).
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The frdm_kw41z board was originally configured in zephyr to use the
jlink runner by default because pyocd didn't yet support the kw41z soc.
Support for kw41z was added in pyocd v0.9.0, so we can now default to
daplink firmware and pyocd.
Now all freedom boards in zephyr consistently use daplink and pyocd.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Reworks the programming and debugging section in the freedom board
documents to leverage the new debugging guide covering debug probes and
host tools.
These boards support OpenSDA DAPLink and OpenSDA J-Link onboard debug
probes. They can also support an external J-Link probe, but this
requires board modifications (cutting traces) and is therefore not
documented.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Reworks the programming and debugging section in the mimxrt1060_evk and
mimxrt1064_evk board documents to leverage the new debugging guide
covering debug probes and host tools.
Neither of these boards have OpenSDA J-Link board-specific firmware,
therefore the only debug probe currently supported is the external
J-Link.
Updates the flashing section to reflect that the ``flash`` build system
target is now supported.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Reworks the programming and debugging section in the mimxrt1020_evk and
mimxrt1050_evk board documents to leverage the new debugging guide
covering debug probes and host tools.
These boards support both the OpenSDA J-Link onboard debug probe and the
J-Link external debug probe.
Corrects an error linking to the wrong OpenSDA J-Link firmware.
Updates the flashing section to reflect that the ``flash`` build system
target is now supported.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Zephyr boards use a wide range of debug probes and debug host tools that
can often be confusing to users. Introduce a new debugging guide that
documents all the different variations of debug probes and host tools in
one place, including which combinations are valid.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Setting callbacks is forbidden from user mode.
Some heavier code changes will be needed to support
adc_read_async(), this patch just exposes the config
and read functions for now.
Test case updated to run partially in user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The original value of 256 was selected more or less randomly
and special cases keep proliferating. Until we have a formal
method of proving maximum syscall stack depth, set to 1024.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Tickless kernel is now always disabled, ensuring that when
the kernel's tick count changes, we really did get a timer
interrupt.
The test now awaits a change in tick count instead of busy
waiting for an arbitrary time period.
Fixes: #15013
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Checking the stack sentinel may abort the current thread,
make this check before we determine what the next thread
to run is.
Fixes: #15037
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Increase test timeout to 500s because it was noticed
that the default of 60s has truncated the test
suite run for nrf52840_pca10056
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
* mpu stack guard exception is a kind of mpu violation exception
* use SW way to distingusih it from other mpu vioation exception
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* the original configurations are configured with stack checking
* the new configurations are configured with mpu stack guard
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* HW_STACK_PROTECTION can be done by STACK_
CHECKING or MPU stack guard. ARC STACK_CHECKING is prioritized
over MPU-based stack guard
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Zero functional change, this is pure refactoring and preparation for
using the mtime= parameter which the gzip.compress() shortcut does not
make available.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
- add glossary terms for important concepts we have to explain often,
like "west installation"
- add autodoc directives for pulling in west API docs
- add missing documentation for built-in features like west's
configuration, extension commands, etc.
- add missing documentation for "west sign" extension
- describe the manifest in a self-contained way rather than linking to
the relevant pykwalify schema, also adding a missing reference to
"west manifest" in the miscellaneous multi-repo commands list
- move various details regarding history and motivation to why.rst
among other changes to repo-tool.rst, leaving it closer to a "tell
me what I really need to know" style overview
- update planned features
Fixes: #14992
Signed-off-by: Marti Bolivar <marti@foundries.io>
Several of our extensions don't declare they are parallel read or
write safe. Upon inspection, they are.
Not declaring parallel read safety defeats a lot of the speed ups that
are possible when using SPHINXOPTS="-j=auto", so mark the extensions
safe and get the performance back.
Signed-off-by: Marti Bolivar <marti@foundries.io>
This fixes some high priority issues, including syntax errors in
docstrings which prevent us from including API docs in our Sphinx
tree.
Signed-off-by: Marti Bolivar <marti@foundries.io>
net_pkt_sendto uses size_t as parameter for len so the value would be
treat as unsigned which may cause and invalid memory to be read.
Fixes#14950#14955
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a note in the tagging section of the release process that explains
why using GitHub release process for tags should NOT be done.
Fixes#14985
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the script to detect and update more instances of unsigned
variable assignments when using all four simple rules of arithmetics.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The original code cannot go to the next step on those boards enabled
TEST_WDT_CALLBACK_2 macro, because of the flow control issue. So the
test function cannot finish, and the board keeps restart. As a result,
failure on the test.
Fixes#13468
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
The GPIO driver is required by this board's initialization code, hence
it is forced to be enabled always, not only enabled by default like on
other boards equipped with an nRF SoC.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch enables the GPIO driver by default on all boards equipped
with an nRF SoC (all boards having `CONFIG_SOC_FAMILY_NRF=y` in their
`_defconfig` file).
In vast majority of cases the driver is needed, so it is more
convenient to enable it at board level than in particular
applications.
And if the driver is undesired for some reason, it can be still
disabled in the application config.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
