The i2s_cavs.c driver manipulates cache lines before commencing
any DMA transfers. With write-back cache, if the DMA receive
buffer is not aligned to the cache lines, the data around
the buffer will be invalidated and may never written to memory.
Since the driver takes an external memory slab as buffer and
there is no easy way to force cache line alignment on
the application side, set the cached region to write-through
to avoid potential issue.
Fixes#13223
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
revert commit 3e255e968 which is to adjust stack size
on qemu_x86 platform for coverage test, but break other
platform's CI test.
Fixes: #15379.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Move the doc version selection menu from the bottom of the left nav menu
to above the TOC menu, making it more obvious.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Drop mode in RTT backend was broken. It is not the default
one so most likely it was unnoticed for a long time. Fixed
to report drop message when logs are lost.
Additionally, added assert to ensure that memmove does not
do memory overwrite.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This is an old script for finding references to undefined Kconfig
symbols that assumes Kconfiglib 1 (an older API).
There's now a different check for references to undefined symbols (see
commit 1d0834b35f ("checks: kconfig: Check for references to undefined
Kconfig symbols") in the ci-tools repo).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
As part of the ll_reserve refactoring effort, the packet length now
includes header size as well. Before the refactor, when the packet
length was written to the device, it did not include the header size,
which is the required value as per the LM3S6965 datasheet. After the
refactor the packet length includes the header size as well. The
header size has to subtracted from the packet length before writing to
the device. Fixes#13943.
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
If for some reason the DNS resolver callback is not called properly
then make sure that semaphore will not block forever.
Fixes#15197
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
for SDK 0.10.0, it consumes more stack size when coverage
enabled, so adjust stack size to fix stack overflow issue.
Fixes: #15206.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
for SDK 0.10.0, it consumes more stack size when coverage
enabled, so adjust stack size to fix stack overflow issue.
Fixes: #15206.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Added release notes for 1.14 release.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit 8d0ef1eb85 attempted to fix
test case MESH/SR/HM/CFS/BV-02-C, however inadvertently ended up
introducing a hidden bug. This bug was unearthed thanks to commit
686f5c79cf. We have to keep always track
of the FastPeriodDivisor state whether we're using it (faults > 0) or
not (faults == 0). Introduce a boolean field to the model publication
that's used to indicate whether the FastPeriodDivisor should be
applied or not, instead of zeroing the divisor when there are no
faults (this would cause wrong behavior when faults appear again).
Additionally, the PTS seems to require that we wait until the end of
the existing period before sending the next Health Current Status,
rather than sending it immediately when the fault count changes.
Fixes#15365
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In the unlucky scenario of a SysTick event (wrap) occurring
while we re-program the last_load value, the SysTick ISR
will run immediately after we unlock interrupts. In that
case the timeout we have just configured will expire
instantaneously, leading to operations being executed
much earlier than expected. Avoid this by clearing possibly
pending SysTick exceptions (writing 1 to ICSR.PENDSTCLR).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the counter reaches zero, it reloads the value in
SYST_RVR on the next clock edge. This means that if the
LOAD value is N, the interrupt ("tick") is triggered
every N+1 cycles. Therefore, when we operate in tickless
mode, and we want to schedule the next timeout, we need
to configure the LOAD value with last_load - 1, in order
to get an event in last_load cycles.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the counter reaches zero, it reloads the value in
SYST_RVR on the next clock edge. This means that if the
LOAD value is N, the interrupt ("tick") is triggered
every N+1 cycles. Therefore, when we operate in non-
tickless mode, we need to configure the LOAD value
with CYC_PER_TICK - 1, in order to get an event
every CYC_PER_TICK cycles.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Check maximum packet size (MPS) of an endpoint in usb_dc_kinetis
and usb_dc_native_posix drivers.
resolves#14957resolves#14954
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Only enable netusb for the right configuration of interface and
alt_setting.
Fixes#13560
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Include to the callback parameters also alt_setting to be able to make
right choice for ECM.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix the controller implementation to make start encryption
queueable if there is any control procedure in progress.
The context related to encryption procedure is now shared so
that it will be used after the ongoing procedure completes.
The fix here maintains the old functionality of serializing
the queued data and LL Encryption Request PDU, so that data
queued before start encryption is acknowledged.
Fixes#15012.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When VLAN is enabled, ethernet l2 layer fills ethernet header
but not added to the network buffer.
Fixes#15346
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Fixes broken CC2520 on quark_se_c1000_devboard configuration after
commit 25d17db.
Fixes#15070
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update the relevant release notes for the documentation improvement
for version 1.14.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
In order to fit in SRAM, reduce the CONFIG_BT_MAX_CONN from 20 to 16 in
the configuration used for the BBC micro:bit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the Controller counterpart to CONFIG_BT_WAIT_NOP so that it
issues a NOP Command Complete event after booting up, to signal to the
Host that it is ready to receive HCI traffic.
Fixes#15333
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
tinycrypt documentation wasn't included in the table of contents so add
it into the guides section.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
When a device is considered unpaired any configuration set in Client
Features shall also be removed.
Fixes#15329
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The erase-block-size and write-block-size are needed for the spi_nor
driver to compile.
scripts/dts/extract/flash.py automatically adds these properties if
this flash device is part of the "chosen" flash node, but they're
otherwise missing.
Signed-off-by: Jim Paris <jim@jtan.com>
The SysTick logic looked logically sound, but it was allowing us to
set a LOAD value as low as 512 cycles. On other platforms, that
minimum future interrupt delay is there to protect the "read, compute,
write, unmask" cycle that sets the new interrupt from trying to set
one sooner than it can handle.
But with SysTick, that value then becomes the value of the LOAD
register, which is effectively the frequency with which timer
interrupts arrive. This has two side effects:
1. It opens up the possibility that future code that masks interrupts
longer than 512 cycles will miss more than one overflow, slipping
the clock backward as viewed by z_clock_announce().
2. The original code only understood one overflow cycle, so in the
event we do set one of these very near timeouts and then mask
interrupts, we'll only add at most one overflow to the "elapsed()"
time, slipping the CURRENT time backward (actually turning it into
a non-monotonic sawtooth which would slip every LOAD cycle) and
thus messing up future scheduled interrupts, slipping those forward
relative to what the ISR was counting.
This patch simplifies the logic for reading SysTick VAL/CTRL (the loop
wasn't needed), handles the case where we see more than one overflow,
and increases the MIN_DELAY cycles from 512 to 1/16th of a tick.
Fixes#15216
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
