michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: Rename reserved function names

Browse source 
Rename reserved function names in the boards/ subdirectory.

Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This commit is contained in:
Patrik Flykt 2019-03-14 14:06:22 -06:00 • committed by Anas Nashif
commit 5aecf9db37
12 changed files with 41 additions and 41 deletions
Download patch file Download diff file Expand all files Collapse all files

6
boards/posix/native_posix/board_irq.h
View file

@ -15,7 +15,7 @@
extern "C" {
#endif
void _isr_declare(unsigned int irq_p, int flags, void isr_p(void *),
void z_isr_declare(unsigned int irq_p, int flags, void isr_p(void *),
void *isr_param_p);
void z_irq_priority_set(unsigned int irq, unsigned int prio, u32_t flags);
@ -32,7 +32,7 @@ void z_irq_priority_set(unsigned int irq, unsigned int prio, u32_t flags);
*/
#define Z_ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p) \
({ \
_isr_declare(irq_p, 0, isr_p, isr_param_p); \
z_isr_declare(irq_p, 0, isr_p, isr_param_p); \
z_irq_priority_set(irq_p, priority_p, flags_p); \
irq_p; \
})
@ -45,7 +45,7 @@ void z_irq_priority_set(unsigned int irq, unsigned int prio, u32_t flags);
*/
#define Z_ARCH_IRQ_DIRECT_CONNECT(irq_p, priority_p, isr_p, flags_p) \
({ \
_isr_declare(irq_p, ISR_FLAG_DIRECT, (void (*)(void *))isr_p, NULL); \
z_isr_declare(irq_p, ISR_FLAG_DIRECT, (void (*)(void *))isr_p, NULL); \
z_irq_priority_set(irq_p, priority_p, flags_p); \
irq_p; \
})

6
boards/posix/native_posix/irq_handler.c
View file

@ -235,7 +235,7 @@ int posix_get_current_irq(void)
/**
* Configure a static interrupt.
*
* _isr_declare will populate the interrupt table table with the interrupt's
* z_isr_declare will populate the interrupt table table with the interrupt's
* parameters, the vector table and the software ISR table.
*
* We additionally set the priority in the interrupt controller at
@ -247,7 +247,7 @@ int posix_get_current_irq(void)
* @param isr_param_p ISR parameter
* @param flags_p IRQ options
*/
void _isr_declare(unsigned int irq_p, int flags, void isr_p(void *),
void z_isr_declare(unsigned int irq_p, int flags, void isr_p(void *),
void *isr_param_p)
{
irq_vector_table[irq_p].irq = irq_p;
@ -316,7 +316,7 @@ void irq_offload(irq_offload_routine_t routine, void *parameter)
{
off_routine = routine;
off_parameter = parameter;
_isr_declare(OFFLOAD_SW_IRQ, 0, offload_sw_irq_handler, NULL);
z_isr_declare(OFFLOAD_SW_IRQ, 0, offload_sw_irq_handler, NULL);
z_arch_irq_enable(OFFLOAD_SW_IRQ);
posix_sw_set_pending_IRQ(OFFLOAD_SW_IRQ);
z_arch_irq_disable(OFFLOAD_SW_IRQ);

6
boards/posix/nrf52_bsim/board_irq.h
View file

@ -15,7 +15,7 @@
extern "C" {
#endif
void _isr_declare(unsigned int irq_p, int flags, void isr_p(void *),
void z_isr_declare(unsigned int irq_p, int flags, void isr_p(void *),
void *isr_param_p);
void z_irq_priority_set(unsigned int irq, unsigned int prio, u32_t flags);
@ -32,7 +32,7 @@ void z_irq_priority_set(unsigned int irq, unsigned int prio, u32_t flags);
*/
#define Z_ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p) \
({ \
_isr_declare(irq_p, 0, isr_p, isr_param_p); \
z_isr_declare(irq_p, 0, isr_p, isr_param_p); \
z_irq_priority_set(irq_p, priority_p, flags_p); \
irq_p; \
})
@ -45,7 +45,7 @@ void z_irq_priority_set(unsigned int irq, unsigned int prio, u32_t flags);
*/
#define Z_ARCH_IRQ_DIRECT_CONNECT(irq_p, priority_p, isr_p, flags_p) \
({ \
_isr_declare(irq_p, ISR_FLAG_DIRECT, (void (*)(void *))isr_p, NULL); \
z_isr_declare(irq_p, ISR_FLAG_DIRECT, (void (*)(void *))isr_p, NULL); \
z_irq_priority_set(irq_p, priority_p, flags_p); \
irq_p; \
})

6
boards/posix/nrf52_bsim/irq_handler.c
View file

@ -298,7 +298,7 @@ int posix_get_current_irq(void)
/**
* Configure a static interrupt.
*
* _isr_declare will populate the interrupt table table with the interrupt's
* z_isr_declare will populate the interrupt table table with the interrupt's
* parameters, the vector table and the software ISR table.
*
* We additionally set the priority in the interrupt controller at
@ -310,7 +310,7 @@ int posix_get_current_irq(void)
* @param isr_param_p ISR parameter
* @param flags_p IRQ options
*/
void _isr_declare(unsigned int irq_p, int flags, void isr_p(void *),
void z_isr_declare(unsigned int irq_p, int flags, void isr_p(void *),
void *isr_param_p)
{
irq_vector_table[irq_p].irq = irq_p;
@ -379,7 +379,7 @@ void irq_offload(irq_offload_routine_t routine, void *parameter)
{
off_routine = routine;
off_parameter = parameter;
_isr_declare(OFFLOAD_SW_IRQ, 0, offload_sw_irq_handler, NULL);
z_isr_declare(OFFLOAD_SW_IRQ, 0, offload_sw_irq_handler, NULL);
z_arch_irq_enable(OFFLOAD_SW_IRQ);
posix_sw_set_pending_IRQ(OFFLOAD_SW_IRQ);
z_arch_irq_disable(OFFLOAD_SW_IRQ);

4
boards/riscv32/hifive1/prci.h
View file

@ -7,8 +7,8 @@
#ifndef _SIFIVE_PRCI_H
#define _SIFIVE_PRCI_H
#define _REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
#define PRCI_REG(offset) _REG32(PRCI_BASE_ADDR, offset)
#define Z_REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
#define PRCI_REG(offset) Z_REG32(PRCI_BASE_ADDR, offset)
/* Register offsets */

12
boards/x86/arduino_101/pinmux.c
View file

@ -18,7 +18,7 @@
/*
* This is the full pinmap that we have available on the board for configuration
* including the ball position and the various modes that can be set. In the
* _pinmux_defaults we do not spend any time setting values that are using mode
* pinmux_defaults we do not spend any time setting values that are using mode
* A as the hardware brings up all devices by default in mode A.
*/
@ -111,7 +111,7 @@
*/
#define PINMUX_MAX_REGISTERS 5
static void _pinmux_defaults(u32_t base)
static void pinmux_defaults(u32_t base)
{
u32_t mux_config[PINMUX_MAX_REGISTERS] = { 0, 0, 0, 0, 0 };
int i = 0;
@ -151,9 +151,9 @@ static void _pinmux_defaults(u32_t base)
}
}
static inline void _pinmux_pullups(u32_t base_address)
static inline void pinmux_pullups(u32_t base_address)
{
_quark_mcu_set_mux(base_address + PINMUX_PULLUP_OFFSET, 104,
z_quark_mcu_set_mux(base_address + PINMUX_PULLUP_OFFSET, 104,
PINMUX_PULLUP_ENABLE);
}
@ -161,8 +161,8 @@ static int pinmux_initialize(struct device *port)
{
ARG_UNUSED(port);
_pinmux_defaults(PINMUX_BASE_ADDR);
_pinmux_pullups(PINMUX_BASE_ADDR);
pinmux_defaults(PINMUX_BASE_ADDR);
pinmux_pullups(PINMUX_BASE_ADDR);
return 0;
}

10
boards/x86/galileo/pinmux.c
View file

@ -482,7 +482,7 @@ static struct mux_path _galileo_path[PINMUX_NUM_PINS * NUM_PIN_FUNCS] = {
{ NONE, 0, DONT_CARE, (GPIO_DIR_IN) } } },
};
int _galileo_pinmux_set_pin(struct device *port, u8_t pin, u32_t func)
int z_galileo_pinmux_set_pin(struct device *port, u8_t pin, u32_t func)
{
struct galileo_data * const drv_data = port->driver_data;
@ -576,7 +576,7 @@ int _galileo_pinmux_set_pin(struct device *port, u8_t pin, u32_t func)
return 0;
}
int _galileo_pinmux_get_pin(struct device *port, u32_t pin, u32_t *func)
int z_galileo_pinmux_get_pin(struct device *port, u32_t pin, u32_t *func)
{
struct galileo_data * const drv_data = port->driver_data;
struct pin_config *mux_config = drv_data->mux_config;
@ -662,7 +662,7 @@ static int pinmux_set(struct device *dev,
return -EINVAL;
}
return _galileo_pinmux_set_pin(dev, pin, func);
return z_galileo_pinmux_set_pin(dev, pin, func);
}
static int pinmux_get(struct device *dev,
@ -673,7 +673,7 @@ static int pinmux_get(struct device *dev,
return -EINVAL;
}
return _galileo_pinmux_get_pin(dev, pin, func);
return z_galileo_pinmux_get_pin(dev, pin, func);
}
static struct pinmux_driver_api api_funcs = {
@ -733,7 +733,7 @@ static int pinmux_galileo_initialize(struct device *port)
* from the above mapping as selected by the end user
*/
for (i = 0; i < PINMUX_NUM_PINS; i++) {
_galileo_pinmux_set_pin(port,
z_galileo_pinmux_set_pin(port,
mux_config[i].pin_num,
mux_config[i].mode);
}

4
boards/x86/galileo/pinmux_galileo.h
View file

@ -29,8 +29,8 @@ struct galileo_data {
struct galileo_data galileo_pinmux_driver;
int _galileo_pinmux_set_pin(struct device *port, u8_t pin, u32_t func);
int z_galileo_pinmux_set_pin(struct device *port, u8_t pin, u32_t func);
int _galileo_pinmux_get_pin(struct device *port, u32_t pin, u32_t *func);
int z_galileo_pinmux_get_pin(struct device *port, u32_t pin, u32_t *func);
#endif /* __PINMUX_GALILEO_PRIV_H */

8
boards/x86/quark_d2000_crb/pinmux.c
View file

@ -30,7 +30,7 @@
* associated pins and ball points.
* This is the full pinmap that we have available on the board for configuration
* including the ball position and the various modes that can be set. In the
* _pinmux_defaults we do not spend any time setting values that are using mode
* pinmux_defaults we do not spend any time setting values that are using mode
* A as the hardware brings up all devices by default in mode A.
*/
/* pin, ball, mode A, mode B, mode C */
@ -64,7 +64,7 @@
#define PINMUX_MAX_REGISTERS 2
static void _pinmux_defaults(u32_t base)
static void pinmux_defaults(u32_t base)
{
u32_t mux_config[PINMUX_MAX_REGISTERS] = { 0, 0 };
int i = 0;
@ -91,10 +91,10 @@ static int pinmux_initialize(struct device *port)
{
ARG_UNUSED(port);
_pinmux_defaults(PINMUX_BASE_ADDR);
pinmux_defaults(PINMUX_BASE_ADDR);
/* Enable the UART RX pin to receive input */
_quark_mcu_set_mux(PINMUX_BASE_ADDR + PINMUX_INPUT_OFFSET, 5, 0x1);
z_quark_mcu_set_mux(PINMUX_BASE_ADDR + PINMUX_INPUT_OFFSET, 5, 0x1);
return 0;
}

6
boards/x86/quark_se_c1000_devboard/pinmux.c
View file

@ -19,7 +19,7 @@
/*
* This is the full pinmap that we have available on the board for configuration
* including the ball position and the various modes that can be set. In the
* _pinmux_defaults we do not spend any time setting values that are using mode
* pinmux_defaults we do not spend any time setting values that are using mode
* A as the hardware brings up all devices by default in mode A.
*/
@ -100,7 +100,7 @@
* the bit description from above
*/
#define PINMUX_MAX_REGISTERS 5
static void _pinmux_defaults(u32_t base)
static void pinmux_defaults(u32_t base)
{
u32_t mux_config[PINMUX_MAX_REGISTERS] = { 0, 0, 0, 0, 0};
int i = 0;
@ -144,7 +144,7 @@ static int pinmux_initialize(struct device *port)
{
ARG_UNUSED(port);
_pinmux_defaults(PINMUX_BASE_ADDR);
pinmux_defaults(PINMUX_BASE_ADDR);
return 0;
}

12
boards/x86/tinytile/pinmux.c
View file

@ -18,7 +18,7 @@
/*
* This is the full pinmap that we have available on the board for configuration
* including the ball position and the various modes that can be set. In the
* _pinmux_defaults we do not spend any time setting values that are using mode
* pinmux_defaults we do not spend any time setting values that are using mode
* A as the hardware brings up all devices by default in mode A.
*/
@ -111,7 +111,7 @@
*/
#define PINMUX_MAX_REGISTERS 5
static void _pinmux_defaults(u32_t base)
static void pinmux_defaults(u32_t base)
{
u32_t mux_config[PINMUX_MAX_REGISTERS] = { 0, 0, 0, 0, 0 };
int i = 0;
@ -151,9 +151,9 @@ static void _pinmux_defaults(u32_t base)
}
}
static inline void _pinmux_pullups(u32_t base_address)
static inline void pinmux_pullups(u32_t base_address)
{
_quark_mcu_set_mux(base_address + PINMUX_PULLUP_OFFSET, 104,
z_quark_mcu_set_mux(base_address + PINMUX_PULLUP_OFFSET, 104,
PINMUX_PULLUP_ENABLE);
}
@ -161,8 +161,8 @@ static int pinmux_initialize(struct device *port)
{
ARG_UNUSED(port);
_pinmux_defaults(PINMUX_BASE_ADDR);
_pinmux_pullups(PINMUX_BASE_ADDR);
pinmux_defaults(PINMUX_BASE_ADDR);
pinmux_pullups(PINMUX_BASE_ADDR);
return 0;
}

2
soc/x86/intel_quark/include/pinmux_quark_mcu.h
View file

@ -34,7 +34,7 @@
#define PIN_CONFIG(A, _pin, _func) \
(A[((_pin) / 16)] |= ((0x3 & (_func)) << (((_pin) % 16) * 2)))
static inline int _quark_mcu_set_mux(u32_t base, u32_t pin, u8_t func)
static inline int z_quark_mcu_set_mux(u32_t base, u32_t pin, u8_t func)
{
/*
* the registers are 32-bit wide, but each pin requires 1 bit