There is an API to query if any IRQ is enabled but there is
none to query individual IRQ line. So add one.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The log from CMake invocation's are now dominated by west
modules. This noise can hide important warnings.
To fix this we drop the logging.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
A recent developer experience study has pointed out that it's very
common for people to miss that the minimum cmake version required by
zephyr is higher than that which is commonly packaged by Linux
distributions.
Since this is a serious usability issue, it's worth adding extra
checking from zcmake.py to make sure that west commands which run
cmake always print a sensible error message if the cmake version used
is too old. Make that happen.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Currently, the interrupt service code manually raises the CPU task
priority to the priority level of the vector being serviced to defer
any lower-priority interrupts. This is unnecessary; the local APIC
is aware that an interrupt is in-service and accounts for its priority
when deciding whether to issue an overriding interrupt to the CPU.
Signed-off-by: Charles E. Youse <charles@gnuless.org>
Error-out when 'project' is invoked before boilerplate.cmake is
included. This is not supported and causes obscure errors.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
A lot of the Kconfig stuff gets copied around, so encourage a clean
compact style:
- Reduce license header spam
- Fix some broken indentation
- Turn a meaningless 'menuconfig' into a 'config'
- Remove a redundant QMSI menu
- Unscrunch comments: #Foo -> # Foo
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move the inclusion of the littefs Kconfig options inside the
'if FILESYSTEM' block so we don't leak Kconfig symbols if FILESYSTEM
support isn't enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Drop the old deprecation warning about
ZEPHYR_TOOLCHAIN_CAPABILITY_CACHE. Sufficient time has passed to allow
users to migrate.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This fixes some typos. Also fix the meaning of a struct field
where the confusion caused by copy-and-paste from another
field.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Correctly set the separator as a semicolon on Windows when
constructing the PYTHONPATH environment variable so that CMake
doesn't intepret it and swallow it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is required to get the watchdog test and sample working since the
required wdt device name macro is generic there.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such watchdog timer is found on mec1501.
It comes with a support of dbg stall feature and interrupt support.
It does not support multistaging.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Get things started for Zephyr 2.1 release notes.
Individual PRs will update their appropriate sections.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When running run_ci.sh locally with:
./scripts/ci/run_ci.sh -l -b master -R upstream/master..
we export BSIM_OUT_PATH unconditionally which causes sanitycheck to fail
on nrf52_bsim (it depends on BSIM_OUT_PATH variable).
Check if the path defined in BSIM_OUT_PATH is available and unset env.
variable if it is not.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add iterator function to iterate over all connection objects.
Make type a bitmap so that it can be used as a bitmask to select which
conns to receive foreach callback.
Use foreach function internally where possible.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allows the user to pass a provisioning input complete callback to the
provisioning module, letting the application stop displaying its output
OOB value when the other party finishes their OOB input.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Made BT_HCI_TX_STACK_SIZE configurable and added BT_HCI_ECC_STACK_SIZE.
These changes are necessary to allow vendors to adjust for other
achitectures.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Rework the BT_ASSERT infrastructure with the following changes:
- Transition from LOG() macros to printk()
- Allow the BT_ASSERT() macro to map directly to stancard __ASSERT()
- Allow printing of the assert reason to be disabled
- Switch from k_oops() to k_panic() configurable
There are 2 reasons for using printk() instead of LOG():
- BT_ERR uses deferred logging by default, which is problematic with
ASSERTs
- The __ASSERT() macro in Zephyr uses printk()
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix issue when checking if SMP pairing procedure is allowed to use the
SMP debug keys. This check did not consider the case where the keys
pointer was assigned, but did not contain a valid LTK key.
This resulted in being unable to pair with debug keys without an
existing bond.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix shell build dependencies, subsys/bluetooth/controller is only added
for CONFIG_BT_LL_SW_SPLIT or CONFIG_BT_LL_SW_LEGACY.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The return code of set_random_address is not always handled. This could
lead to connection using the wrong Identity address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
nrf_timer.h and nrf_ppi.h are included by including
radio_nrf5.h, so we do not need to include them in
radio.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Simplify two loops in create_memread_cmd() by looping over elements
instead of indices, to fix two pylint warnings.
Fixing warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
UnicodeDecodeError.object supports indexing, but pylint gets confused
for some reason.
doc/scripts/extract_content.py:70:16: E1136: Value 'e.object' is
unsubscriptable (unsubscriptable-object)
This warning is useful enough to want to have enabled in the upcoming
pylint CI check, so suppress it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Empty sequences in Python are falsy, so
if len(config_file) != 0:
can be simplified to
if config_file:
pylint warning:
C1801: Do not use `len(SEQUENCE)` to determine if a sequence is
empty (len-as-condition)
Simplify the code a bit with os.path.join(), which indirectly gets rid
of the warning. os.path.join('', 'foo') returns 'foo', so things work
out when os.path.basename() returns '' (no directory) as well.
I'm getting rid of pylint warnings for a CI check.
Also replace a '== None' with 'is None', which is more common.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Getting slightly subjective, but fixes this pylint warning:
scripts/west_commands/zcmake.py:186:13: R1714: Consider merging
these comparisons with "in" to "type_ in ('STRING', 'INTERNAL')"
(consider-using-in)
Use a set literal instead of a tuple literal, as recent Python 3
versions optimize set literals with constant keys nicely.
Getting rid of pylint warnings for a CI check. I could disable any
controversial ones (it's already a list of warnings to enable anyway).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Empty sequences are falsy in Python, so len() can be skipped.
Fixing pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Non-empty sequences are truthy in Python, so len() can be skipped.
Fixing pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Getting slightly subjective, but fixes this pylint warning:
doc/extensions/zephyr/application.py:274:15: R1714: Consider merging
these comparisons with "in" to "goal in ('build', 'sign')"
(consider-using-in)
Use a set literal instead of a tuple literal, as recent Python 3
versions optimize set literals with constant keys nicely.
Getting rid of pylint warnings for a CI check. I could disable any
controversial ones (it's already a list of warnings to enable anyway).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove a trailing comma that generated a single-element tuple and made
pylint warn:
scripts/west_commands/boards.py:50:8: W0106: Expression
"(parser.add_argument(...), )" is assigned to nothing
(expression-not-assigned)
No functional change.
Fixing pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix pylint warnings like these:
Comparison to True should be just 'expr' (singleton-comparison)
Comparison to False should be 'not expr' (singleton-comparison)
I checked that GPIO.read() only returns True/False in the
python-periphery docs.
Getting rid of pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
'a < b and b < c' can be simplified to 'a < b < c' in Python.
Fixes this pylint warning:
scripts/gen_kobject_list.py:198:22: R1716: Simplify chained
comparison between the operands (chained-comparison)
Fixing pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
